OS X 10.8.3 Update

[primalair]

Same here. LuxMark Score dropped from 1150 to 680 on my GTX670OC with latest Cuda driver.

 

[mosser]

Updatede my Nuc today went well

 

[GrinRoth]

Gigabyte GA-Z68X-UD3H
Core i7 2600K
NVIDIA GTX 560 Ti

Update was painless! Installed combo update en rebooted.
After reboot no sound, installing ALC889 through multibeast and reboot again solved it. All seems to be working just fine so far!

 

[Asus-Freak]

Clean install with 10.8.3, GTX 660 supported but wake from sleep still fails!

 

[krasicher]

Article: OS X 10.8.3 Update

hi, everyone
after the update i had problem like DGaeng and other people. On reboot the screen stuck on the first 4 or 5 rows. Like this:

Red HFS+ file [hd(0,2)/system/library/CoreServices/SystemVersion.plist] 478 bytes.
Loading Darwin 10.8
Loading Kernel cache /System/Library/Caches/com.apple.kext.chaches/startup/kernelcache
Read HFS+ file [hd(0,2)/system/Library/Caches/com.apple.kext.caches/startup/kernelcache] 4096 bytes.
Read HFS+ file [hd(0,2)/system/Library/Caches/com.apple.kext.caches/startup/kernelcache] 16452478 bytes.

I solved the problem for me. Hope this solution work for you.
1: I take out The SSD from the Hackintosh and plug like external HDD on my MacBook
2: Delete the Extra folder
3: Execute the MultiBeast with the marks for my system(don't forget to change the target disk)
4: Repair the permissions (for Hackintosh HDD) with Disk Utility of the MacBook
5: Put back the Hackintosh HDD
6: Boot

Sorry for my poor english

 

[theshiv]

I just updated and after the boot loader I get a black screen. I tried booting in -x mode, but I still get a black screen. I can boot via UniBeast, and that works fine. When I boot with UniBeast my system shows as 10.8.3. No idea what's going on.

http://www.tonymacx86.com/os-x-updates/92762-updated-10-8-3-now-have-black-screen.html#post568565

 

[Ritey]

Article: OS X 10.8.3 Update

Updated to the new CUDA drivers today.

Here are the Unique Heaven 4.0 for the 650 Ti (NVIDIA D14P2-30)

Unigine Heaven Benchmark 4.0

FPS:	23.3
Score:	588
Min FPS:	9.1
Max FPS:	50.7

System

Platform:	Darwin 12.3.0 x86_64
CPU model:	Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (3655MHz) x4
GPU model:	NVIDIA D14P2-30 (1024MB) x1

Settings

Render:	OpenGL
Mode:	1600x900 8xAA windowed
Preset	Extreme

 

[Hausmeista]

Hey guys,

I just installed the update and everything appears to be running just like it should.

My graphics card: Gigabyte GeForce GTX 650 Ti 1 GByte

Here's what I did:
-Downloaded Combo-Update 10.8.3 and the new Nvidia Cuda-Driver
-Installed Cuda-Driver
-Installed OS X-Combo-Update
-Re-installed audio driver from MultiBeast
-Restart (took a little longer than normal, but patience paid off)
-DONE

Graphics seam to show a slight improvement:
Unigine Heaven Score: 670 (10.8.3) vs. 668 (10.8.2)
Unigine Valley Score: 1648 (10.8.3) vs. 1623 (10.8.2)

Just one thing I noticed: 'About this Mac' now reports 'NVIDIA D14P2-30' under Graphics card. Under 10.8.2 I had to install Drivers from the Nvidia-website and it was reported as 'GeForce GTX 650 Ti 1 GByte'. Probably just cosmetic, but curious.


Really happy! This was my first Update for my Hacintosh and I must admit that I was a little worried as quite a few here are reporting problems.
Good luck to all of you!

 

[Ritey]

Article: OS X 10.8.3 Update

Hey guys,

I just installed the update and everything appears to be running just like it should.

My graphics card: Gigabyte GeForce GTX 650 Ti 1 GByte


Graphics seam to show a slight improvement:
Unigine Heaven Score: 670 (10.8.3) vs. 668 (10.8.2)
Unigine Valley Score: 1648 (10.8.3) vs. 1623 (10.8.2)

Good luck to all of you!

---------------------------

UH 670 score is great for the 650 Ti. What CPU/MB are you installed on?

 

[gaart]

On Gigabyte X79S-UP5, all previous multibeast installations remain. Only sound needs to be patched and Trim enabled.