OS X 10.8.1 Update

[tigerking9]

I have a problem Ethernet is not working anymore -> http://www.tonymacx86.com/mountain-lion-desktop-support/69719-10-8-1-now-no-ethernet.html

 

[chosborne]

Article: OS X 10.8.1 Update

No trouble updating to 10.8.1 with my ASUS P8Z68-V system.

 

[edd6312]

after the update i have a problem with reboot. Reset BIOS every time i reboot. installed EVO reboot and RTC with multibeast no results . Z68X-UD3H-B3 f12 . I installed ML without DSDT noticed that if i install it with DSDT there's a problem with sleep/Wake. update done from App store

 

[tipex]

Article: OS X 10.8.1 Update

I had some overclocking issue with my Asus Sabertooth z77 I7 3770K @ 4.6ghz
I used to have 18'000 on Geekbench with 10.8

I upgraded to 10.8.1 and i was lock for a while at 13'500.

But I figured it out, 10.8.1 seems add again NullCPUPowerManagement.kext just simply removed it and everthing is working well

 

[KNNSpeed]

Article: OS X 10.8.1 Update

DZ77RE-75K successfully updated through the Mac App Store--no problems so far.
The Thunderbolt port is still not showing up in System Information under "Thunderbolt," though, so nothing's new there.

 

[Midphase]

Article: OS X 10.8.1 Update

But I figured it out, 10.8.1 seems add again NullCPUPowerManagement.kext just simply removed it and everthing is working well

Ok...for me that was a bad idea. On my X79 with a 3930k after I removed that Kext I kept getting a kernel panic at startup and all I could do is re-install everything from scratch.

Lesson learned!

 

[circle2land]

Article: OS X 10.8.1 Update

All fine here. GA-Z77X-UD5H

worked for me on GA-Z77-DS3H and Radeon HD 6850 1GB

 

[Starvegal]

Article: OS X 10.8.1 Update

Everything good on Ivy Bridge w/GA-Z77-D3H and HD6850.

 

[jrii]

Article: OS X 10.8.1 Update

1. I downloaded the Update from the link above,
2. I installed it
3. It give me "installation failed" at the end of the installation
4. I reboot, boots up fine.
5. I'm running 10.8.1.

Sadly there is no fix for the nVidia Sleep/Wake issue. So i can not leave the house without turn the Monitor Off. ggggrrrrrrrr!!!!

cheers

Probably you are not really running 10.8.1. E.g. if you check your kexts dates in S/L/E you'll see that only system.kext is updated (which gives the 10.8.1 status). If not other kexts are updated (I recall there were 3 updates) your installation has failed.

 

[mengko616]

All fine here. GA-Z68MX-UD2H-B3