Contribute
Register

OS X 10.10 Yosemite on Gigabyte GA-Z68MX-UD2H-B3 in progress

Joined
Nov 7, 2012
Messages
62
Motherboard
Z68-MX-UD2H-B3
CPU
i5-2500K
Graphics
RX 580
Mobile Phone
  1. Android
  2. iOS
OS X 10.10 Yosemite with Clover on Gigabyte GA-Z68MX-UD2H-B3

Hardware:


  • MB >> Gigabyte GA-Z68MX-UD2H-B3 rev..1.0.
  • CPU >> Intel i5 2500k
  • VGA >> Sapphire ATI HD5870
  • RAM >> Corsair Vengeance 8GB 1600MHz
  • SSD >> Intel 330 120GB
  • PSU >> Zalman ZM750W
  • BT >> GMYLE(Broadcom BCM20702 chipset)
Software :

  • MB Bios >> U1E(UEFI BIOS)
  • OS X Yosemite 10.10
  • Clover r2976

Status:
Working:

  • Sound Realtek ALC889 - cloverALC patch from toleda (link)
  • Network Realtek RTL8111E - RTL8111.kext (link) or RealtekRTL81xx.kext (link)
  • SSD Trim - Clover inj.(link)
  • Bluetooth - bluetooth work out of the box
  • Video - QE/CI working
  • AppStore - Working
  • iTunes Store - Working
  • ​iCloud - Working
  • iMessage - Working fixed by this guide
  • FaceTime - Working

Not tested:

  • USB 3 - Not tested
  • Sata3 chip Marvell 88SE9172 - Not tested
  • Sleep - Not tested
  • SpeedStep - Not tested

Does not work:

  • Booting screen resolution - Not Working

BIOS/UEFI Settings:
Screenshot gallery

CLOVER Settings:
Screenshot gallery

Clover installation: Guide here

Before I made clean install(actually I made few to make iMessage work) of Yosemite i had ML 10.8 in my system with unibeast and multibeast.
Now I working to make iMessage and FaceTime work. Try everything from this guide, but can't make it working.
Every time I trying to login iMessages getting this error "C
ould not sign in to iMessage. An error occurred during activation. Try again"


14/11/05 Update - iMessage fixed by this guide
 
Last edited by a moderator:
Joined
Jun 18, 2011
Messages
26
Motherboard
GIGABYTE GA-Z68MX-UD2H
CPU
i5-2500K
Graphics
AMD Radeon RX 580
Did you ever test speedstep? I just converted from using multibeast and wondered how to get the power management functioning properly on the 2500k i5 sandy bridge.
 
Joined
Jan 7, 2011
Messages
168
Motherboard
Gigabyte Z68MX-UD2H-B3
CPU
i7-2600K
Graphics
GTX 970
Mac
  1. MacBook Pro
Classic Mac
  1. 512K
  2. iBook
  3. iMac
  4. LC
  5. Performa
  6. Plus
  7. PowerBook
  8. SE
  9. SE/30
I'm also trying to get a GA-Z68MX-UD2H-B3 working with UEFI U1e, but Clover gives me a blank screen immediately after I select the boot volume (in verbose mode, right after the "root device uuid is" line - see http://www.tonymacx86.com/yosemite-...-mean-when-clover-hangs-root-device-uuid.html).

Which drivers did you install from the Clover installer's Drivers64UEFI section?

Would you please post a copy of your config.plist file?
 
Top