OS X 10.10.3 Update

[remoagostino123]

Well thats interesting, I can now push 4k 3840x2160 out go my gtx 970 on my LG 40"TV using the hdmi slot. This was not possible before. Im only getting 3ohz so i don't think there is support for hdmi 2.0 yet but still this was not possible on my build before 10.10.3 and the new updates.

 

[trek4]

Updated super easily, TRIM didn't break having already used IOAHCIBlockStorage kext patch for Clover listed in Post #142. My ALC1150 audio didn't break either thanks to the patch by toleda. The native HDMIAudio.kext from Macrumours also works perfectly so no problems there either.

All I needed to do was update Nvidia native drivers to latest version after updating.

 

[morfie1]

TRIM from 7.2 Multibeast is not working on GB H87 D3H. I tried to re-install it 2 times. Audio is OK. I'm waiting for the new Multibeast next week.

Anyway, thanks for the good work !

 

[medkintos]

After updating via App Store, my installation stuck on black screen
Resurrected by nv_disable=1 and install Nvidia Web Driver, and now works like a charm

At first attempt, I install MacPro5,1 SMBIOS, but boot stuck at blank grey screen. So, i revert back to MacPro3,1 and it's working as it should

 

[awer25]

Worked 100% for me. I updated Clover first just for the heck of it, and then updated from 10.10.2 to 10.10.3 via the App Store. Everything went smoothly. After updating, I just had to reenable Trim & update nVidia drivers (new ones were already available).

 

[babis306]

Thanks for the help. After a shutdown an power on again bluetooth work perfect, before after restart didn't work. Now it's all OK.
Thanks everybody.

 

[Rackham]

Hello all, Booting Clover on a x79 system with gtx 980 i updated my back up boot drive to test 10.10.3 with the new Nvidia web drivers but i get a blank screen any hints on how to fix this. system is working perfectly on 10.10.2 and if i boot with NV disable =1 it works but without any grafx acceleration. i use Mac Pro 6,1 and would like to keep it that way so i dont screw my iMessages / iCloud working set up.

TIA

 

[jancy]

Brilliant Update, on my Gigabyte z97X Gaming 7 System -Gigabyte Nvidia GTX 970 G1 Gaming running via Clover.

Ran the Alc100 Audio enabler command and ran the Nvidia Beta Update, post install. Works like a charm

I have not touched or patched anything DSDT related (it thinks its a 27 imac, Late 2013), but a great system with clover.

Virtually the same system here. Did u have to replace applehda kext or just run toledas alc audio?

Also did you you app store or combo update

 

[audioHack]

Hi All,

GA-Z77X-UD5H Hackintosh here running Clover. I installed the update from the App Store. When I reboot, I get to the login screen (with crappy graphics, as expected since I haven't yet installed the 10.10.3 Nvidia alternate drivers yet). When I log in, it hangs at the logging in screen and gives me a spinning beach ball. Any ideas? Not sure what else to do other than copy back over my SuperDuper clone.

Thanks!

 

[jbalint88]

Hi All,

GA-Z77X-UD5H Hackintosh here running Clover. I installed the update from the App Store. When I reboot, I get to the login screen (with crappy graphics, as expected since I haven't yet installed the 10.10.3 Nvidia alternate drivers yet). When I log in, it hangs at the logging in screen and gives me a spinning beach ball. Any ideas? Not sure what else to do other than copy back over my SuperDuper clone.

Thanks!

I have a similar build. What sys def are you using? I was using MacPro6,1 and I needed the NVdia drivers and change the injection in the graphics section of my config.plist to yes for Nvidia. I also lost my second monitor connection via HDMI. I reverted to iMac13,2 and used the OS X drivers, then changed my config.plist graphic injection back to no for Nvidia and now all is well. I have both on-board and Nvidia card recognized and everything is working. It all had to do with the sys definition being MacPro6,1