Contribute
Register

OS X 10.10.1 Update

Status
Not open for further replies.
Joined
Oct 15, 2014
Messages
163
Motherboard
GA-Z97X-GAMING-GT
CPU
i7-4790k 4.4ghz
Graphics
Nvidia GeForce GTX 970 SC
Mac
  1. Mac Pro
Mobile Phone
  1. iOS
Article: OS X 10.10.1 Update

i fixed mine doing:
run clover configurator
mount efi partition
BACKUP your config.plist in efi partition, clover folder to somewhere else
load config.plist
go to smbios tab (it must be now populated with your current S/N)
click the wizard icon and switch system definition to macpro 3,1. or 4,1. or 5,1
save settings by clicking the export button
reboot
now install the nvidia driver
reboot
display driver should be working correctly now
go to clover configurator again, mount efi and replace the config.plist file with the original one you backed up previously
reboot
enjoy

Thanks so much for replying to my concern!!!! I really appreciate it :)

Unfortunately the fire burning inside me to get this thing going drove me to decide on trying a fresh install with clover instead of a migration from chimera to clover like I did before. If I still can't iron things out i'll get to where i was with chimera, migrate to where i was again, and use your method.
 
Joined
Nov 22, 2011
Messages
43
Motherboard
GA-Z270-HD3
CPU
i7-7700K
Graphics
RX 570
Mac
  1. MacBook Air
  2. MacBook Pro
Mobile Phone
  1. iOS
Upgraded from 10.10 to 10.10.1 with no problems, also took the time to add Toledo's Clover Audio Patch and added Patch for TRIM at boot. :D
 
Joined
Nov 10, 2014
Messages
28
Motherboard
MSI Z97i Gaming Mini-ITX
CPU
i7 4790K
Graphics
GX970
Mac
  1. MacBook Pro
  2. Mac mini
Classic Mac
Mobile Phone
  1. Android
I'm not sure what went wrong but the upgrade went off without a hitch and i lost sound (as expected) as well as my NVIDIA drivers for the GTX970.

A Reboot loaded fine (without sound) and NVIDIA graphics reloaded without a hitch.

I then loaded mulitbeast and reinstalled the audio drivers (ALC1150) and rebooted.

That's when the S**t in the fan. I kept getting a Kernel Panic with the last error message being "System uptime in Nanoseconds"

Tired booting in safe mode, tried disabling the NVIDIA Drivers (though i knew they were not the issue) and then in desperation removed the USB dongle for my D-Link DWA-160

And guess what? It loaded!

No idea what a USB port would cause a Kernel Panic but happy that I seemed to have found the issue after the update

Board is a Mini-ITX MSI Z97i Gaming AC
 
Joined
Sep 22, 2012
Messages
5
Motherboard
GA-EP45-DS3R
CPU
Socket 775
Graphics
GT640
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
Article: OS X 10.10.1 Update

Use Updater after repairing permissions, reboot and everything went fine except Audio ALC889 show "No devices found" . (Webcam Logitech C525 ok)
Ran Latest Multibeast 7.02 and install kext for ALC889 ... Still No Audio, no devices.
Use old trick found here : Ran MultiBeast version 6.22 , install only ALC889 DSDT Free then Devices and Audio are back fine.
Thanks you.
Gigabyte GA-Z68XP-UD4 (F6)


Same for me, I have a Gigabyte GA-EP45-DS3R (F10).
All the rest works fine.
Thanks for the trick
 
Joined
Jul 25, 2012
Messages
6
Motherboard
OSX10.10.2
CPU
Xeon 2.66 quad Core
Graphics
760 GTX 4GB DDR5
Mac
  1. iMac
  2. MacBook Pro
Classic Mac
  1. 128K
  2. 512K
Mobile Phone
  1. iOS
GA-P55-UD4P
Updated to 10.10.1 via the App Stpre. Had to reinstall TRIM and CMOS reset patch with Multibeast. Everything else fine (sound, network, etc). Still no NVRAM support with Chimera though so iMessage still not working. Have tried to make a Clover install USB stick for this board with no luck yet.
 
Joined
Dec 11, 2010
Messages
102
Motherboard
DELL 9560
CPU
I7-7700HQ
Graphics
HD 630, GTX 1050, 4k
Mobile Phone
  1. Android
Article: OS X 10.10.1 Update

Running Clover, Trim Fix, Mac Mini 6.2, on my Desktop

Gigabyte GA-Z77X-UP5-T
Intel Core i7-3770K

everything is working great for years now, never had problems with any update, but this one :(..


I tried to update my 10.10 installation (according to the guide) to 10.10.1 a few times via app store update and combo update and i always end up in a boot loop.
I have absolutely no clue what´s the problem...
 
Joined
Oct 31, 2014
Messages
135
Motherboard
Lenovo LNVNB161216
CPU
i7-8550U
Graphics
UHD 620 (3840x2160)
Mobile Phone
  1. Android
Seamless update -- I was a bit scared but all went well. No need to run Multibeast either. I use external USB sound so not bothered about internal though. GA-Z97N-WIFI.
 
Joined
Jun 9, 2011
Messages
1
Motherboard
mac os 10.10.0
CPU
core i3 3.09 Ghz
Graphics
Nvidia Geforce 8400Gs 1024MB
Mac
Classic Mac
Mobile Phone
  1. iOS
Boot From Chimero Not Working wth 10.10.1 from laptop hp elitebook 9470m

upgraded my laptop hp elitebook 9470m 10.10. system to 10.10.1, everything fine, but the boot with Chimera not working, reinstall chimera again and nothing happens, reboot the system and nothing... apply boot -v and nothing happens, only works the system booting with chimera from USB.

Repair permisions: nothing
reinstall some kext, (ahci or something for the system): error to install.

i Will try Reinstall YOsemite, then upgrade to 10.10.1 and the install kext, etc..
 
Joined
Dec 28, 2012
Messages
158
Motherboard
Gigabyte GA-Z87X-UD5H, 16 GB
CPU
Intel i5 4670K
Graphics
GTX 760
Mac
  1. MacBook
Classic Mac
Mobile Phone
On latest clover. Had trim update in clover config. Installed from app store and rebooted. Still have sound, still have trim. No issues. Seems snappier.
Gotta love clover.
 
Joined
Jul 14, 2014
Messages
70
Motherboard
AIO Acer Aspire C22-865
CPU
Intel i3 8130U
Graphics
UHD Graphics 620
Mac
  1. iMac
Mobile Phone
  1. iOS
GA X58A-UD3R
Clover

Updated from AppStore like a real Mac. Repaired permissions before the update just in case.
As simple as that ))
 
Status
Not open for further replies.
Top