Contribute
Register

Omen 15-ek0006nl not entering installer

Status
Not open for further replies.
So damn difficult! I tried to leave only PS2 voodoo, still getting errors:

00:000 00:000 AAPL: [EB|#LOG:INIT] 2020-10-18T15:59:16
00:065 00:065 AAPL: [EB|#VERSION] bootbase.efi 422.140.3~2 (Official), built 2020-06-07T17:23:12-0700
00:117 00:052 AAPL: [EB|#BUILD] BUILD-INFO[306]:{"DisplayName":"bootbase.efi","DisplayVersion":"422.140.3~2","RecordUuid":"D49FA16E-32C0-433B-A742-7405C713BE39","BuildTime":"2020-06-07T17:23:12-0700","ProjectName":"efiboot","ProductName":"bootbase.efi","SourceVersion":"422.140.3","BuildVersion":"2","BuildConfiguration":"Release","BuildType":"Official"}
00:170 00:052 AAPL: [EB|#H:IS] 0
00:222 00:052 AAPL: [EB|#WL:MODE] 0
00:275 00:052 AAPL: [EB|#CONFIG:SRC] <default>
00:328 00:052 AAPL: [EB|#CONFIG| 0] boot-save-log : 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) <default>
00:381 00:052 AAPL: [EB|#CONFIG| 1] wake-save-log : 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) <default>
00:434 00:052 AAPL: [EB|#CONFIG| 2] console : 0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) <default>
00:486 00:052 AAPL: [EB|#CONFIG| 3] serial : 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) <default>
00:539 00:052 AAPL: [EB|#CONFIG| 4] embed-log-dt : 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) <default>
00:592 00:052 AAPL: [EB|#CONFIG| 5] timestamps : 0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) <default>
00:652 00:060 AAPL: [EB|#CONFIG| 6] log-level : 0x0000000000000001 (0x0000000000000001 & 0x0000000000000001) <default>
00:705 00:052 AAPL: [EB|#CONFIG| 7] breakpoint : 0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) <default>
00:757 00:052 AAPL: [EB|#CONFIG| 8] kc-read-size : 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) <default>
00:810 00:052 AAPL: [EB|#H:IS] 0
00:862 00:052 AAPL: [EB|#WL|0] 0x01 0x01 0 0x00
00:915 00:052 AAPL: [EB|#BRD:NV] Mac-E1008331FDC96864
00:968 00:052 AAPL: [EB|#WL|1] 0x01 0x01 2 0x00
01:021 00:053 AAPL: [EB|`BST:IDT] {
01:075 00:054 AAPL: [EB|`BST:IDT] }
01:128 00:052 AAPL: [EB|#WL|2] 0x01 0x01 3 0x00
01:181 00:052 AAPL: [EB|#WL|3] 0x01 0x01 4 0x00
01:234 00:052 AAPL: [EB|#BRD:NV] Mac-E1008331FDC96864
01:324 00:090 AAPL: [EB|#WL|4] 0x01 0x01 5 0x00
01:376 00:052 AAPL: [EB|`H:CHK] BM: 0x0000000000000000
01:430 00:053 AAPL: [EB|`H:CHK] Err(0xE) @ GV boot-signature
01:482 00:052 AAPL: [EB|#WL|5] 0x01 0x01 23 0x0E
01:535 00:052 AAPL: [EB|`H:CPM] Err(0xE), (24, 24) @ GV Persistent-memory-note
01:589 00:053 AAPL: [EB|`SB:EN] Err(0xE) @ LocP 24B73556-2197-4702-82A8-3E1337DAFBF2
01:642 00:052 AAPL: [EB|#LIMG:DP] Acpi(PNP0A03,0)/Pci(14|0)/Usb(1, 0)/HD(Part2,Sig421A93E9)
01:694 00:052 AAPL: [EB|#LIMG:FP] \System\Library\CoreServices\boot.efi
01:747 00:052 AAPL: [EB|#LIMG:OPT] ()
01:800 00:052 AAPL: [EB|#RPS] R?0 P?0 S?0
01:857 00:056 AAPL: [EB|`OPT:LXF] 'LF (\\System\\Library\\CoreServices\\com.apple.Boot.plist)
01:909 00:051 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: \\System\\Library\\CoreServices\\com.apple.Boot.plist, DP: 0
01:961 00:052 AAPL: [EB|`LD:OFS] Err(0xE) @ OPEN (\\System\\Library\\CoreServices\\com.apple.Boot.plist)
02:029 00:067 AAPL: [EB|`OPT:LXF] Err(0xE) @ 'LF
02:081 00:052 AAPL: [EB|`OPT:LXF] 'LF (Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist)
02:133 00:052 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist, DP: 0
02:210 00:076 AAPL: [EB:#KF] (root-dmg=file:///Install%20macOS%20Catalina.app/Contents/SharedSupport/BaseSystem.dmg)
02:267 00:057 AAPL: [EB|#MBA:CL] ()
02:320 00:052 AAPL: [EB|#MBA:NV] (-v keepsyms=1 debug=0x100 alcid=11 igfxcflbklt=1 -igfxmlr -wegnoegpu -v keepsyms=1 debug=0x100 alcid=1 setpowerstate_panic=0 -no_compat_check)
02:372 00:052 AAPL: [EB|#MBA:KF] (root-dmg=file:///Install%20macOS%20Catalina.app/Contents/SharedSupport/BaseSystem.dmg)
02:425 00:052 AAPL: [EB|#MBA:OUT] (-v keepsyms=1 debug=0x100 alcid=11 igfxcflbklt=1 -igfxmlr -wegnoegpu setpowerstate_panic=0 -no_compat_check root-dmg=file:///Install%20macOS%20Catalina.app/Contents/SharedSupport/BaseSystem.dmg)
02:478 00:052 AAPL: [EB|#LOG:VERBOSE] 2020-10-18T15:59:18
02:530 00:052 AAPL: [EB|#OPT:BM] 0x4082
02:584 00:053 AAPL: [EB|#P:CPR] N
02:636 00:052 AAPL: [EB|#P:MPI] N
02:732 00:095 AAPL: [EB|#P:BPI] N
02:784 00:052 AAPL: [EB|`CS:CSKSD] {
02:836 00:052 AAPL: [EB|`CS:CSKSD] Err(0xE) @ GV 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF:boot-info-payload
02:889 00:052 AAPL: [EB|`G:CS] } Ok(0)
02:942 00:052 AAPL: [EB|`LD:LF] FIO: 0, DIR: 1, P: <null string>, DP: 1
03:052 00:110 AAPL: [EB|`B:SBS] SZ: 621112
03:115 00:062 AAPL: [EB|#B:SHA] 4f3bba9614aa0dbae1943ab55b83beac7e278986
03:168 00:052 AAPL: [EB|`WL:pWLFNV] Err(0xE) @ GV wake-failure
03:220 00:052 AAPL: [EB|`WL:DT] Err(0xE) @ WL:pWLFNV
03:273 00:053 AAPL: [EB|`WL:pWLFRTC] ! @ RTC:R
03:326 00:052 AAPL: [EB|`WL:DT] Err(0xE) @ WL:pWLFRTC
03:379 00:052 AAPL: [EB|`LD:LKC] BPDK -> (System\Library\PrelinkedKernels\prelinkedkernel.development)
03:431 00:052 AAPL: [EB|`LD:OFS] Err(0xE) @ OPEN (System\\Library\\PrelinkedKernels\\prelinkedkernel.development)
03:507 00:075 AAPL: [EB|`LD:LKC] BPDK,!R -> (System\Library\PrelinkedKernels\prelinkedkernel)
08:311 04:803 OC: Prelink injection VoodooI2C.kext () - Invalid Parameter
08:510 00:199 AAPL: [EB|`LD:LKFS] } Ok(0)
08:561 00:051 AAPL: [EB|`LD:LKC] } Ok(0)
08:615 00:053 AAPL: [EB|#FWFM] 0xFFFFFF7F
08:667 00:052 AAPL: [EB|#FWFT] 0xFDAFF066
08:720 00:052 AAPL: [EB|#CSR:IN] 0x00000FFF
08:773 00:052 AAPL: [EB|#CSR:OUT] 0x00000FFF
08:828 00:055 AAPL: [EB|`BST:FBS] {
08:880 00:051 AAPL: [EB|`BST:FBS] BA.ADSZ: 0
08:933 00:052 AAPL: [EB|`BST:FBS] BA.KSDSZ: 0
08:986 00:052 AAPL: [EB|`B:WFDW] Err(0xE), 0 @ LocHB 71B4903C-14EC-42C4-BDC6-CE1449930E49
09:039 00:052 AAPL: [EB|#LOG:DT] 2020-10-18T15:59:25
09:134 00:095 AAPL: [EB|#LOG:EXITBS:START] 2020-10-18T15:59:25

I'll try to boot from scratch as simple as I can
 
This is with the EFI from your guide, modified as per your guide advices..
 

Attachments

  • EFI.zip
    2.9 MB · Views: 41
  • WhatsApp Image 2020-10-18 at 19.12.10.jpeg
    WhatsApp Image 2020-10-18 at 19.12.10.jpeg
    96.2 KB · Views: 49
Trying to boot with different config.plist I am now stuck at the point that, even if I don't plug a bootable USB to the laptop, when i press F9 to change boot order only a black screen appears, without possibilities to change
 
Trying to boot with different config.plist I am now stuck at the point that, even if I don't plug a bootable USB to the laptop, when i press F9 to change boot order only a black screen appears, without possibilities to change
i don't suppose it would boot without a usb installer?

sandisk make good installer's

try a usb2.0 stick, try all ports on your laptop
 
I don't know what happened...

- If I try to boot with the usb inserted, press f9, only a black screen appears instead of booting choices.
- changing USB port doesn't change the problem
- reformatting and rebuilding USB doesn't change the problem
- removing the USB doesn't change the problem
 
I don't know what happened...

- If I try to boot with the usb inserted, press f9, only a black screen appears instead of booting choices.
- changing USB port doesn't change the problem
- reformatting and rebuilding USB doesn't change the problem
- removing the USB doesn't change the problem
so when no usb stick in your machine, you just get a blank screen when turning on you laptop?
 
so when no usb stick in your machine, you just get a blank screen when turning on you laptop?
no, just when i press f9 to manually select from boot options available, a black screen is displayed with no options.
If I dont press f9 the systme normally boot from HDD
 
Last edited:
I managed to solve the problem reupdating my BIOS
Unfortunately I don't have any clue nor news on installing Catalina... same errors over and over
 
I followed your guide building the USB from windows 10.
This is the error I get and the EFI
 

Attachments

  • EFI.zip
    2.8 MB · Views: 41
  • WhatsApp Image 2020-10-20 at 18.54.24.jpeg
    WhatsApp Image 2020-10-20 at 18.54.24.jpeg
    141.1 KB · Views: 40
I followed your guide building the USB from windows 10.
This is the error I get and the EFI
you may need to experiment with the kernel quirks
 
Status
Not open for further replies.
Back
Top