Contribute
Register

NVIDIA Releases Alternate Graphics Drivers for macOS Sierra 10.12.5 (378.05.05.15)

Status
Not open for further replies.
is it possible to run 4K@60Hz over HDMI 2.0 with this driver ? 4k@30Hz and 1080p@60Hz on an 50" monitor is absolute a nogo :(

All the adapters DP to HDMI 2.0 dont work. and i tested all of them . They can only run 4K30Hz as the original HDMI 2.0 port, too
 
I updated to 10.12.5 last night. After reboot I was on the default drivers, and got an NVIDIA update popup so went through with that. After finishing the NVIDIA update and a reboot, my displays go black as the graphics drivers are loaded at boot. I'm not able to get any video.

Any thoughts on the cause? Is there an easy way to roll back the drivers to the previous version? I wasn't having any video problems until the OSX update.

EDIT: fixed my problem by running AGDPfix.app again.

same problem has been solved, thanx
 
still bugs on fcp x using GTX980Ti, some 3D Text can't render.
 
I updated to 10.12.5 last night. After reboot I was on the default drivers, and got an NVIDIA update popup so went through with that. After finishing the NVIDIA update and a reboot, my displays go black as the graphics drivers are loaded at boot. I'm not able to get any video.

Any thoughts on the cause? Is there an easy way to roll back the drivers to the previous version? I wasn't having any video problems until the OSX update.

EDIT: fixed my problem by running AGDPfix.app again.

same problem has been solved, thanx
I have the same problem. how do you re-run agdpfix if you have blank screen?




EDIT

At boot go to clover options-> select inject nvidia
the system booted with osx default drivers. then I ran the agdpfix and now it works fine
 
Last edited:
Really? I had that happen only once under 10.12.4 but haven't had it happen since - even after updating to 10.12.5 and the latest Web Drivers. I'm using a DP cable, if that makes any difference. I'll check it again when I get home from work later.
Managed To Get It To Work! HOORAY! Basically Put The File Below Into You EFI/Clover/Drivers64UEFI, Also, I Screwed It Up First Time Round With Clover So I Just Extracted The File Instead So No One Else Would Have To Go Through The Trouble I Went Through ;/

EDIT: Also Make Sure You Have The Latest Update With Latest Web Drivers, Only Use This IF You Select Use nVidia Web Drivers But When You Restart It Goes Back To OS X Default.
 

Attachments

  • EmuVariableUefi-64.efi.zip
    12.2 KB · Views: 653
I have the same problem. how do you re-run agdpfix if you have blank screen?

you can load system without nvidia drivers. just disable "use NVIDIA" option in a loader or you can just booted from flash drive with setup OS, whiout any NVIDIA settings
 
web drivers are disappoint me((
some strange bugs in Adobe CC software on my GTX1080
 

Attachments

  • Screen Shot 2017-05-18 at 01.53.15.png
    Screen Shot 2017-05-18 at 01.53.15.png
    2.3 MB · Views: 990
i'm not sure if this is a driver problem. i use .CR2 raw images normally on GTX 750 Ti 2gb with NVIDIA WEB and CUDA drivers. really, some view bugs are displays at a raw image preview some time in the Photoshop, but these bugs disappear after rotate the image. mac os quick-view work correctly for a raw images
 
tried following toleda's DSDT patching guide?web drivers aren't going to fix HDMI audio in any of the cards :p
@niclasc no the update will show after you boot to 10.12.5

I used the HDMI scripts the output detect the Nvidia HDMI and says that are enabled but when I restarted nothing happens , only applehda outputs is detected .
 
Status
Not open for further replies.
Back
Top