- Joined
- Oct 17, 2011
- Messages
- 18
- Motherboard
- Gigabyte Designare X299
- CPU
- i9-9980XE
- Graphics
- AMD 9000
- Mac
- Mobile Phone
Does anyone know if there is a Kext file that will support the nVidia Quadro 4000m?
I'm working on an HP Z1 All-in-One with this card installed (the Z1 has a removable 1000m,3000m, or 4000m card) I can get it to work sometimes if I connect an external display but will need to various boot modifiers (-f npci=0x3000 PCIRootUID=1 ) It will not work 100% of the time. For example, once I get it working , it's 50/50 whether it will work on the next reboot.All you see is the typical driver issue = Blackscreen
GraphicsEnabler=Yes will typically only light up the external display - but again, not 100% of the time.
If I remove all 8 of the nvidia related Kext files, the internal display works 100% of the time as expected with no acceleration and no external monitor support.
I've tried both 10.8.2 nvidia drivers as well as the most recent nvidia drivers 3.04 for 10.8.2 from their website.
I'm working on an HP Z1 All-in-One with this card installed (the Z1 has a removable 1000m,3000m, or 4000m card) I can get it to work sometimes if I connect an external display but will need to various boot modifiers (-f npci=0x3000 PCIRootUID=1 ) It will not work 100% of the time. For example, once I get it working , it's 50/50 whether it will work on the next reboot.All you see is the typical driver issue = Blackscreen
GraphicsEnabler=Yes will typically only light up the external display - but again, not 100% of the time.
If I remove all 8 of the nvidia related Kext files, the internal display works 100% of the time as expected with no acceleration and no external monitor support.
I've tried both 10.8.2 nvidia drivers as well as the most recent nvidia drivers 3.04 for 10.8.2 from their website.
