Benchmarks
EVGA GeForce GTX 1070 SC Black
Z170-SOC Force
Core i7 6700k
32 GB Crucial Ballistic Elite DDR4-2666
View attachment 247643 View attachment 247644 View attachment 247645 View attachment 247646 View attachment 247677 View attachment 247678
Cinebench is heavily CPU bound, modern GPUs are barely utilized in this benchmark. I wouldn't recommend using it for comparing GPU performance.Hi Macman,
Could this be true, MY Cinebench R15 scores 121fps with a Nvidia GTX 970. Was expecting more performance from a pascal GTX 1070. Any reason ?
I have the Gigabyte Nvidia GTX 1050 TI and I can only get 1 monitor to work. I have two "HP 23es" displays connected through the included HDMI cables. Interestingly, only the left most (if looking at the back of the computer) port will work. I have tried tweaking lots of random settings in the config.plist file but can't seem to get both monitors to work even though they both work in Windows 10. I have attached my config file for hopefully much smarter people to be able to help me figure it out. My current settings have "inject" on ATI/Intel/Nvidia set to false, I do not have either nvda_drv or nv_disable set, SMBIOS is set to "iMac14,2". I have tried various options under Clover Configuration within the Graphics section, including: Load Bios, Video Ports, BootDisplay. macOS appears to be properly recognizing my video card as it says this under About My Mac, "Graphics: NVIDIA GeForce GTX 1050 Ti 4095 MB". When you look at the detailed report, it says under Graphics/Displays:
NVIDIA GeForce GTX 1050 Ti:
Chipset Model: NVIDIA GeForce GTX 1050 Ti
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 4095 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x1c82
Revision ID: 0x00a1
ROM Revision: VBIOS 86.07.39.00.56
Metal: Supported
Displays:
HP 23es:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: XXXXXXXXXX (this was properly listed)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Automatically Adjust Brightness: No
Any help would be appreciated. I don't know if it matters but I am currently running macOS through a USB3 external hard drive.
Edit: Also, Im pretty confident that it isn't an HDMI cable matter as I can plug my second monitor in the first HDMI port on my video card and it will turn on. Have tried several arrangements, but no dice. Someone who has gotten a Pascal card with more than one monitor working please help.
Have you created a new thread with your problem?Someone please help if you are able.
I have the Gigabyte Nvidia GTX 1050 TI and I can only get 1 monitor to work. I have two "HP 23es" displays connected through the included HDMI cables. Interestingly, only the left most (if looking at the back of the computer) port will work. I have tried tweaking lots of random settings in the config.plist file but can't seem to get both monitors to work even though they both work in Windows 10. I have attached my config file for hopefully much smarter people to be able to help me figure it out. My current settings have "inject" on ATI/Intel/Nvidia set to false, I do not have either nvda_drv or nv_disable set, SMBIOS is set to "iMac14,2". I have tried various options under Clover Configuration within the Graphics section, including: Load Bios, Video Ports, BootDisplay. macOS appears to be properly recognizing my video card as it says this under About My Mac, "Graphics: NVIDIA GeForce GTX 1050 Ti 4095 MB". When you look at the detailed report, it says under Graphics/Displays:
NVIDIA GeForce GTX 1050 Ti:
Chipset Model: NVIDIA GeForce GTX 1050 Ti
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 4095 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x1c82
Revision ID: 0x00a1
ROM Revision: VBIOS 86.07.39.00.56
Metal: Supported
Displays:
HP 23es:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: XXXXXXXXXX (this was properly listed)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Automatically Adjust Brightness: No
Any help would be appreciated. I don't know if it matters but I am currently running macOS through a USB3 external hard drive.
Edit: Also, Im pretty confident that it isn't an HDMI cable matter as I can plug my second monitor in the first HDMI port on my video card and it will turn on. Have tried several arrangements, but no dice. Someone who has gotten a Pascal card with more than one monitor working please help.
Updated sig to reflect the build.
And it seems as though its an issue with dual monitors. Im running stable now with just one.
What interface are you using for your second monitor? I am in the same situation. Main monitor on DisplayPort/Displayport works, second dvi monitor causes freezes. I don't remember if it crashes with the dvi/dvi cable (because it makes the portrait dvi monitor the main monitor so boot is sideways). It definitely does crash with a dvi-hdmi cable. I'm considering ordering an active DisplayPort / dvi cable to see if that works. I'd assumed that the problem was in the interface conversion.
What kind of ports on the card and monitor are you using?
hm... i have changed the system definition a few times, but did not help. Also i was having another systems definition, none of those written in this guide, still the same issues ...