Nvidia GTX 980Ti HDMI/DP Buggy audio

[serone]

Good morning everybody!

I have recently installed MacOSX Sierra in my computer using Clover 2.3k here are my specs:

MB: Gigabyte z170x
Video: Gigabyte 980GTX ti
Core: Intel 67000k Skylake


I have been experiencing different issues that i got to solve thanks to your page and to several other post and videos, I´ve got to solve mostly 90% of them but....

After installing 100 Series Audio and VodooHDA 2.8.6 / By only using this kexts Ive got no sound.

After I installed Toledas audio_cloverHDMI-120.command. typing yes to both questions

I rebooted and I got audio, anyway there is some kind of white noise anytime MacOSX reproduces a sound ( like frog, beep etc ). And everytime i play a song or a video the sound slowly fades higher, I have no sound control also.

This is my clover Acpi config.plist

I know this is not a critical issue, but honestly is pretty annoying

¿ Is there somebody out there experiencing the same problem as me?

Thanks in advance!

 

[toleda]

After installing 100 Series Audio and VodooHDA 2.8.6

Voodoo instead of AppleHDA.
100 series/cloverHDMI require AppleHDA.
One or the other, not both.

 

[serone]

Hi again Toleda and thank you for your rapid response.

Actually I tried what you said, with this different combinations:

• Uninstall Voodoohda 2.8.6 and install 100 series with multibeast + execute audio_cloverHDMI-120.command = No audio ( No audio devices detected )
• Install only voodoo + execute audio_cloverHDMI-120.command = Same buggy audio with white noise and volume fading up when starting a video or a song
• After this I tried to install the legacy AppleHDA.kext ( using easykext ) + 100 series audio with multibeas = I got a kernel panic and I had to install again the whole OS.

I don't want to go ahead and keep on trying different combinations of kext without making some research before. As I consider my system is clean now ( after trying many things on the first install, for sure Clover was full of entries and kexts that were struggling in the boot sequence )

Im attaching my config.plist in case somebody wants to have a look

Thank you for your time

 

[serone]

im Attaching extra info about my system:

About My Mac

System Profile - Audio:

Extensions File:

Clover Drivers64 Folder

Thanks again!

 

[toleda]

I tried what you said

Ignored Post #2, expected result.
Unfixable, clean install.
Attach IOReg.

 

[serone]

Hi Toleda,

You will find attached my IOREG file

By

unfixable, clean install

You mean that there is no option to fix this? Right now I'm running on a clean install, I did not install any audio drivers yet.

I did install nvidias web drivers

Do I have to reinstall MacOS again? which drivers should I use or avoid in my installation ?

For more info this is the drivers that I used in my Bootable USB´s clover 2.3k installation ( EFI partition )

This are the ones that I used for this install into /EFI/CLOVER/kexts

Other File:

10.12 File:

Thank you for everything you are awesome!

 

[toleda]

did not install any audio drivers

OK.
Remove CLOVER/kexts/10.12/HDMIAudio.kext (not supported on this site)
Install ssdt_hdef-1-100-hdas.zip.
Restart
Run HDMI Audio AppleHDA/cloverHDMI
Restart
If no HDMI audio, see Problem Reporting, Post #1, HDMI Audio AppleHDA. Post to thread linked.

 

[serone]

Hi Toleda!

GOOD NEWS:

Perfectly working audio following your last post indications!




Thank you so much! You are the best!!!