Contribute
Register

Nvidia GTX 770M will not work

Status
Not open for further replies.
Doing a standard install, installing Kexts, and changing graphics in the plist seems to work. I have acceleration on intel, webcam works, so I should be good. Not terribly concerned with the gtx. The only things not working are sound and the touchpad seems iffy, it might need an alps kext. I'll work on those.

Thanks for all the help.

Nvidia not supported in Optimus configuration.
Details in FAQ.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 
Also is there a command or app that will tell me if CI/QE is truly fully enabled? I've tried searching google but all those methods seem unreliable.
Chess
 
Attached this has RunMe , thanks in advice!
When I set IntelGFX to 0x04128086 and Ig-platform-id 0x04120004, for some reason the MAC doesnt found the Intel card and stuck boot at logo screen but, when I tried to connect using sharing screen I got logged and running with GTX770m driver, but stucked at 1280x1024 resolution like below

388679


With other setup of kexts loaded and config.list I can run with intel hd4600 but at notebook display everything is bugged
like picture bellow
hd4600
nvidia


Haswell 4700HQ
hd4600 - gtx770m
I think the problem of hd4600 is at framebuffer 24bit, I remember at sierra installation when was working, the drive got 32bit color.

388673


I tried everything (lilu+whatevergreen)
This fakeids and platform ids from ollaria
IntelGFX 0x04128086
Ig-platform-id 0x04120004
Check InjectIntel

Those from you @RehabMan
0x01660003: HD4000 1366x768
0x01660004: HD4000 1600x900, 1920x1080
0x01660008, 0x01660009: HD4000 1600x900, 1920x1080

0xa260006: HD4400/HD4600/HD5000
Other Haswell ig-platform-id values: 0xa260005, 0xa260000, 0xa160000, 0xa2e0008, 0xa2e000a

Tried too DSDT patch and load at clover, SSDT for energy and power management
388674


There is a way to use gtx as main display ? or maybe disable nvidia and use only hd4600?

Or maybe I would go back sierra 10.12.5 and use those kexts bellow to work with hd4600?
388684
 

Attachments

  • Send me Arthurnote.zip
    4.1 MB · Views: 63
Attached this has RunMe , thanks in advice!
When I set IntelGFX to 0x04128086 and Ig-platform-id 0x04120004, for some reason the MAC doesnt found the Intel card and stuck boot at logo screen but, when I tried to connect using sharing screen I got logged and running with GTX770m driver, but stucked at 1280x1024 resolution like below

View attachment 388679

With other setup of kexts loaded and config.list I can run with intel hd4600 but at notebook display everything is bugged
like picture bellow
View attachment 388660View attachment 388661

Haswell 4700HQ
hd4600 - gtx770m
I think the problem of hd4600 is at framebuffer 24bit, I remember at sierra installation when was working, the drive got 32bit color.

View attachment 388673

I tried everything (lilu+whatevergreen)
This fakeids and platform ids from ollaria
IntelGFX 0x04128086
Ig-platform-id 0x04120004
Check InjectIntel

Those from you @RehabMan
0x01660003: HD4000 1366x768
0x01660004: HD4000 1600x900, 1920x1080
0x01660008, 0x01660009: HD4000 1600x900, 1920x1080

0xa260006: HD4400/HD4600/HD5000
Other Haswell ig-platform-id values: 0xa260005, 0xa260000, 0xa160000, 0xa2e0008, 0xa2e000a

Tried too DSDT patch and load at clover, SSDT for energy and power management
View attachment 388674

There is a way to use gtx as main display ? or maybe disable nvidia and use only hd4600?

Or maybe I would go back sierra 10.12.5 and use those kexts bellow to work with hd4600?
View attachment 388684

Refer to the guide:
 
Refer to the guide:
I followed this guide and now I disabled my nvidia driver with your DSDT patchs, and I got iGPU hardware accelerate
Now the last thing isnt working is sleep and wake, I getting some freeze screen when sleep, and infinite black screen when wake
 
Status
Not open for further replies.
Back
Top