Contribute
Register

NVIDIA GeForce 5xx Graphics in Lion [TEST]

Status
Not open for further replies.
MADM03 said:
I have a little request,
can anyone with working OpenGL test if the WebGL Demos on the three.js site work?
https://github.com/mrdoob/three.js/
Especially the Featured projects

The demos worked with my old 8800GTX but with my 560 TI most of them dont run anymore. Neither with Chrome nor with Safari.

Works fine with Firefox
 
Hi all Gtx5xx users .
I finally get something good with my Gigabyte Gtx570 ( GV-N570D5-13I-B )under 10.7.2
Don't know why but under 10.7.1 i couldn't have OpenGl working without boot in verbose mode under chimera.

1/ install 10.7 and update to 10.7.2
2/ install NVDAGF100Hal.kext ( gtx570 for 10.7.2 )
GeForceGLDriver.bundle ( for 10.7.2 )
AppleGraphicsPowerManagement.kext ( for 10.7.2 )
Installed with KextUtility ( found in multibeast )

3/ i have to use multibeast and select:
customization / boot Options / and select 64-bit Apple BootScreen
This one should add graphicalenabler=Yes
With the Step 3 i get Cinebench openGl going from 10Fps to 32,75 Fps ..

It doesn't seems that change system definition from macpro3.1 to 5.1 or iMac 12.2 change performances .
If someone can explain me what system definition should be choose ..its something i don't really understand so i make it a macro 5.1 for yet .

Some screens /
capturedcran20111015184.png

capturedcran20111015184.png
 
Peter R. said:
Lo and behold, full GL and a framerate of 46,88 after 10.7.2 update. Only thing I had to do was add the device id to the plist. No kextos modificados.
No problems whatsoever with the icloud

My ipod is resyncing. I'll do the ipad after that.

Today, I am a happy camper. :headbang:
Hi Peter,

I'm wondering, which GTX card did you wind up getting full OpenGL on? Was it the 570? or something else?

Thanks. I'm dreaming of the day I can have full everything on my GTX 570 ID 1086. So I can get back to full time 3d Animating. It's been a drag getting raw performance out of this thing on Mac. A drag no one should experience.
 
UPDATE: 10.7.2 Installed (After much trouble) and GTX 590 working with Full Acceleration and OpenGL :)
 
Pretty low scores.? any idea why... I know the GTX 590 is 2x under clocked 580's and I'm prob only using 1xGPU under OSX but should it be that low.

Screen%20Shot%202011-10-15%20at%2020.41.21.png
 
Update: replace GefoceGLDriver with a Patched OpenCL one from Kexts for 10.7.2 as my OpenCL was not woking so LUX Render did not run now that runs and have better FPS 42 :)

Screen%20Shot%202011-10-15%20at%2022.58.26.png


Anyone have there LUX Render results to hand as my GPU GTX 590 only showing 64 Compute units should this not be 512 running with 1 GPU and 1024 Running with 2.?

Screen%20Shot%202011-10-15%20at%2022.53.30.png


Screen_Shot_2011-10-15_at_23.03.30.png
 
NativeNewYorker said:
Peter R. said:
Lo and behold, full GL and a framerate of 46,88 after 10.7.2 update. Only thing I had to do was add the device id to the plist. No kextos modificados.
No problems whatsoever with the icloud

My ipod is resyncing. I'll do the ipad after that.

Today, I am a happy camper. :headbang:
Hi Peter,

I'm wondering, which GTX card did you wind up getting full OpenGL on? Was it the 570? or something else?

Thanks. I'm dreaming of the day I can have full everything on my GTX 570 ID 1086. So I can get back to full time 3d Animating. It's been a drag getting raw performance out of this thing on Mac. A drag no one should experience.

It's a Gainward GTX570 GS board, id is 1081. Works a treat now ! Just installed 10.7.2, started with npci=0x2000, added the 1081id to the plist, done.
 
I updated to 10.7.2 some days ago now. The only thing I have done since is adding my device ID (gtx570) into the info.plist. But there must be something else, right? Something I must have forgot since the resolution is still at 1024x768.

This has probably been explained lots of times already. Sorry for that..


Oops, nevermind. It was just kext utility deciding to pull a prank on me!
 
It's a Gainward GTX570 GS board, id is 1081. Works a treat now ! Just installed 10.7.2, started with npci=0x2000, added the 1081id to the plist, done.[/quote]Thanks Peter I'll give it a shot tonight.
 
Mi GtX580 funciona perfecta, Cinebench 53,95
 

Attachments

  • Captura de pantalla 2011-10-16 a la(s) 19.23.38.png
    Captura de pantalla 2011-10-16 a la(s) 19.23.38.png
    697.9 KB · Views: 320
Status
Not open for further replies.
Back
Top