No video after multibeast

[dwatanabe]

After a lot of trial and error i was able to install lion using unibeast and then once i set up the ethernet and ran multibeast my computer tried to reboot and failed. It just never turn back on. I turned off the power after that and tried to restart and I get no video signal coming out from any port on my video card or motherboard. The fans seem to turn on and all the lights on the motherboard also turn on but no video signal.

Gigabyte z68xp-ud3
Intel core i5 2500k
radeon 6850

 

[Conficio]

Do you have remote screen share enabled? If so you might be able to remote into the machine and re-run MultiBeast. Saved me a few times.

If you don't have it enabled, google for command line enabling it. I vaguely remember that was possible.

I hope that gets you going again

K<o>