Contribute
Register

No Trackpad/Keyboard, USB not working either

Status
Not open for further replies.
HolyMacrel

HolyMacrel

Joined
Aug 25, 2011
Messages
153
Motherboard
SONY VAIO E14 SVE14A390X
CPU
i7-3632QM/HM76
Graphics
HD 4000, HD 7670M
Hey guys, I upgraded to Yosemite and everything went well, boots up into the login screen, but I have no trackpad/keyboard to log in and run anything. Tried plugging in USB but getting nothing. Anyone having a similar issue?
 
HolyMacrel said:
Hey guys, I upgraded to Yosemite and everything went well, boots up into the login screen, but I have no trackpad/keyboard to log in and run anything. Tried plugging in USB but getting nothing. Anyone having a similar issue?
Click to expand...

You need GenericUSBXHCI.kext: https://github.com/RehabMan/OS-X-Generic-USB3. Add to /Extra/Extensions on the USB.

And it sounds like you didn't add laptop support. Add this kext to /Extra/Extensions: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller
 
Thanks for the reply. I'll try that out. I thought I added laptop support on the Unibeast install, but I'll double check. Thanks,
 
Just tried and it doesn't seem to be fixing the issue. I wonder what I did wrong.
 
HolyMacrel said:
Just tried and it doesn't seem to be fixing the issue. I wonder what I did wrong.
Click to expand...

Are you booting the installer or already installed?
 
Sorry. I should be more specific. Already completed installation, but as an update, only 1 of my USB ports is actually working. I was able to plug in a keyboard and get it to work, but I don't have wifi working and I can't have a keyboard and a usb working simultaneously to get multi beast off of a usb. Everything seems to be working from my previous install except wifi, the usb ports, and my trackpad/mouse. I have 2 USB 2.0, and 2 USB 3.0 ports, and if it helps, I'm using a kext you made for the synaptic trackpad I believe.
 
Ok, so in a rather unusual turn of events. I had previously installed a touch screen program called TP Mon on my Snow leopard, and it still worked on Yosemite. So I was able to use my touch screen as a mouse, get everything situated, and have everything working perfectly except for my brightness buttons, Wifi, and my USB 3.0 ports. Man. I feel extremely lucky this was so easy. Even 3 finger swipe and audio are still working. Now I just have to get the other couple things done and it's solid!
 
HolyMacrel said:
Sorry. I should be more specific. Already completed installation, but as an update, only 1 of my USB ports is actually working. I was able to plug in a keyboard and get it to work, but I don't have wifi working and I can't have a keyboard and a usb working simultaneously to get multi beast off of a usb. Everything seems to be working from my previous install except wifi, the usb ports, and my trackpad/mouse. I have 2 USB 2.0, and 2 USB 3.0 ports, and if it helps, I'm using a kext you made for the synaptic trackpad I believe.
Click to expand...

Are you using GenericUSBXHCI.kext? Did you update it?

https://github.com/RehabMan/OS-X-Generic-USB3

Also, a lot of my other kexts are updated. See: http://www.tonymacx86.com/yosemite-...-rehabman-kexts-builds-binaries-yosemite.html

WiFi: Depends on having compatible hardware. Use DPCIManager->PCI List to find out what you have. Compatible chipsets and the procedures for making them work are covered here: http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html
 
Yep. I updated my kexts with the new USB one you linked earlier. Though my USB 3.0 ports still aren't working. I have the Atheros9285 and got it working by reading your reply to another user. Pretty much everything is working at the moment except for USB 3.0, my battery percentage, and my brightness settings/keys.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top