(No Success) GA Z97X UD7 / i7 4790K / 8GBx4 DDR3 1600 PC3-12800 UDIMM Memory / Samsung 850 EVO 500G

[santi.ramirezv]

Hi dudes!

I have not succeeded yet to install Yosemite 10.10.3 with this gear.

First I had these Kernel Panic:
CPU Caller 4 "Machine Check at 0x000000010af6ff44, registers:\n"
https://www.dropbox.com/s/30x9sk5211krh53/kernel panic of hell.jpg?dl=0
I tried both Multibeast and Clover and both gave the same error.
Then i tried to install Ubuntu just to check that everything works with another OS. At first it didn't. I had some boot error, but then I reinstalled my cooler on the CPU and Ubuntu get to work.

Then, I just keep trying with Clover. Some dudes in another forum helped me at some point changing my EFI Folder.(I don't know much about changing kernels and config.plist and they didn't explain me how I could do it)
In that process I had this crashes:
https://www.dropbox.com/s/lr1ki6866j5zo6l/02 Kernel Panic MacOSX.jpg?dl=0
https://www.dropbox.com/s/gqndgo34l1c4lqv/IMG_0314.JPG?dl=0
https://www.dropbox.com/s/taagwrauapmuv31/IMG_9964.JPG?dl=0
https://www.dropbox.com/s/6ei1j8p8qv49r2r/IMG_9966.JPG?dl=0

So, I came here for help. Does anybody has the same gear and could get to install Yosemite?
Thanks!

 

[P1LGRIM]

Hi dudes!

I have not succeeded yet to install Yosemite 10.10.3 with this gear.

First I had these Kernel Panic:
CPU Caller 4 "Machine Check at 0x000000010af6ff44, registers:\n"
https://www.dropbox.com/s/30x9sk5211krh53/kernel panic of hell.jpg?dl=0
I tried both Multibeast and Clover and both gave the same error.
Then i tried to install Ubuntu just to check that everything works with another OS. At first it didn't. I had some boot error, but then I reinstalled my cooler on the CPU and Ubuntu get to work.

Then, I just keep trying with Clover. Some dudes in another forum helped me at some point changing my EFI Folder.(I don't know much about changing kernels and config.plist and they didn't explain me how I could do it)
In that process I had this crashes:
https://www.dropbox.com/s/lr1ki6866j5zo6l/02 Kernel Panic MacOSX.jpg?dl=0
https://www.dropbox.com/s/gqndgo34l1c4lqv/IMG_0314.JPG?dl=0
https://www.dropbox.com/s/taagwrauapmuv31/IMG_9964.JPG?dl=0
https://www.dropbox.com/s/6ei1j8p8qv49r2r/IMG_9966.JPG?dl=0

So, I came here for help. Does anybody has the same gear and could get to install Yosemite?
Thanks!

Please read the Rules :

Profiles need to contain at least your primary system to assist others with helping you

Thanks in anticipation


You don't need to host your images on third party sites, you can attach them to your posts here.

 

[santi.ramirezv]

Done dude. Sorry about it.

 

[Jithin.C.V]

Hi dudes!

I have not succeeded yet to install Yosemite 10.10.3 with this gear.

First I had these Kernel Panic:
CPU Caller 4 "Machine Check at 0x000000010af6ff44, registers:\n"
https://www.dropbox.com/s/30x9sk5211krh53/kernel panic of hell.jpg?dl=0
I tried both Multibeast and Clover and both gave the same error.
Then i tried to install Ubuntu just to check that everything works with another OS. At first it didn't. I had some boot error, but then I reinstalled my cooler on the CPU and Ubuntu get to work.

Then, I just keep trying with Clover. Some dudes in another forum helped me at some point changing my EFI Folder.(I don't know much about changing kernels and config.plist and they didn't explain me how I could do it)
In that process I had this crashes:
https://www.dropbox.com/s/lr1ki6866j5zo6l/02 Kernel Panic MacOSX.jpg?dl=0
https://www.dropbox.com/s/gqndgo34l1c4lqv/IMG_0314.JPG?dl=0
https://www.dropbox.com/s/taagwrauapmuv31/IMG_9964.JPG?dl=0
https://www.dropbox.com/s/6ei1j8p8qv49r2r/IMG_9966.JPG?dl=0

So, I came here for help. Does anybody has the same gear and could get to install Yosemite?
Thanks!

Recreate the bootable USB as per this guide : http://www.tonymacx86.com/yosemite-...-x-yosemite-any-supported-intel-based-pc.html (Clover is more complex than UniBeast, so it is better to try installation with UniBeast)

If your BIOS is running with an older version, then update it to F4 (Stay away from F5, as it is for broad well CPU support and will prohibits updating to earlier version BIOS)

Once it is done, load optimised defaults on BIOS. And make changes as below (Ignore those are not available/applicable),

1. Set Boot Mode to Legacy/CSM Enabled
2. Disable Secure Boot
3. Disable Fast Boot
4. Disable CFG-Lock
5. Set OS Type as Other OS
6. Disable VT-D
7. Disable TPM
8. Set IG (Integrated Graphics) as your Initial Display Port
9. Set IGPU Ram as 64MB
10. Set SATA Mode as AHCI
11. Disable EIST (Enhanced Intel Speedstep Technology)
12. Enable USB Legacy Support
13. Set xHCI mode as AUTO (Not SMART Auto)
14. Set xHCI Hand-Off as Enabled
15. Enable the EHCI Hand-off
16. Enable HPET
17. Set HPET to 64-Bit

Connect monitor using DVI-DVI or HDMI-HDMI cable.

Try booting with "dart=0 IGPEnabler=Yes -f -v"

 

[santi.ramirezv]

Didn't work dude. Same kernel panic I think. Look:


Follow your BIOS settings exactly.
The only thing is that I had already upgrade to F5, because in this thread of other forum the dude advice to. How can I downgrade?

Thanks!

 

[Jithin.C.V]

Didn't work dude. Same kernel panic I think. Look:
View attachment 145615

Follow your BIOS settings exactly.
The only thing is that I had already upgrade to F5, because in this thread of other forum the dude advice to. How can I downgrade?

Thanks!

It seems like the panic is related with CPU.

Try booting with including flag "cpus=1".

From F5 you cannot downgrade.

 

[santi.ramirezv]

It's alive!
It finally worked with that boot. Thank you Jithin!

I then booted with Clover, as some friend told me that is better and some places that I read says is the future of hackintosh.

But then, I have some issues:

Chrome Browser is crashing everytime I opened it.
Here is what happens on terminal with Chrome:

Magic Trackpad is not working with the majority of gestures. And sometimes scrolling stops functioning. Search for solutions on different forums and still don't fix it. I tried the Magic Trackpad with another hackintosh of a friend and it worked very well... all gestures and scrolling were ok.

Finally the hackintosh boot very slow. It takes like 2:30 minutes to get to user account login.

Anyone with solutions to this bugs?

 

[Jithin.C.V]

It's alive!
It finally worked with that boot. Thank you Jithin!

I then booted with Clover, as some friend told me that is better and some places that I read says is the future of hackintosh.

But then, I have some issues:

Chrome Browser is crashing everytime I opened it.
Here is what happens on terminal with Chrome:
View attachment 145757
Magic Trackpad is not working with the majority of gestures. And sometimes scrolling stops functioning. Search for solutions on different forums and still don't fix it. I tried the Magic Trackpad with another hackintosh of a friend and it worked very well... all gestures and scrolling were ok.

Finally the hackintosh boot very slow. It takes like 2:30 minutes to get to user account login.

Anyone with solutions to this bugs?

Have you installed clover to SSD??

Which config.plist you are using now??

Which version of OS X you are running now?? 10.10.3 or 10.10.4 ??

Have you enabled TRIM support??

 

[santi.ramirezv]

Have you installed clover to SSD??

Which config.plist you are using now??

Which version of OS X you are running now?? 10.10.3 or 10.10.4 ??

Have you enabled TRIM support??

So, this is my config:
https://www.dropbox.com/s/4usylzwfgjanci2/config.plist?dl=0

I'm running 10.10.4
And I didn't know about TRIM but now is enabled. How could this help me with the bugs?
Trackpad still without most gestures and Chrome keeps crashing.

Thanks again!