Contribute
Register

No Sound - Realtek ALC AppleHDA [Guide]

Status
Not open for further replies.
Pretty new here.. just getting started overall but I have no sound.



  1. New user, X99X/1150 onboard audio
    • MultiBeast 7.3
    • Select: Drivers > Audio > Realtek ALC1150 > √ ALC1150
    • plus √ Optional Optional HDAEnabler > √ Audio ID: 1


Also tried using the script to patch native HDA (reverted /S/L/E/AppleHDA.kext to original).


Followed this guide originally:
http://www.tonymacx86.com/yosemite-desktop-guides/156102-success-yosemite-fatal1ty-asrock-x99x-killer-gtx-980-i7-5820k-update-10-10-2-a.html

(Other people with this board have the same problem it seems like.)



II. Problem Reporting (post to this thread with attachments)



  1. Description of audio problem
    1. No sound output from the green audio jack on the rear of my motherboard.
  2. OS X version/motherboard model/BIOS version/processor/graphics
    1. Yos 10.10.3
    2. Asrock X99X Fatality Killer
    3. 1.9
    4. 5820k
    5. NVidia Geforce 770
  3. Procedure/Guide Used
    1. Terminal Saved Output (if Terminal script run)
      1. realtekALC - see attachment
  4. Copy of IOReg (Tools 1.1) or IOJones (Tools 1.2)
    1. IOJones/Save.. — attached
  5. System/Library/Extensions/AppleHDA.kext
    1. I’m unclear on this step — attached what I think is right
    2. 266.5-toledaALC1150
  6. System/Library/Extensions/AppleHDAxxx.kext (if installed)
    1. I don’t have this?
  7. Console/All Messages/kernel Sound Assertions - select/Save Selection As:
    1. My all messages section didn’t contain any output, so I looked through the others and pulled from system.log -> sound assertions
  8. Screen shots:
    1. System Information/Hardware/Audio/Intel High Definition Audio (not Devices) - attached
    2. System Preferences/Sound/Output - attached
  9. Chimera/Chameleon (if installed)
    1. Extra/org.chameleon.Boot.plist — attached
    2. DPCIManager/Misc/Boot Log — attached
  10. Clover (if installed)
    1. EFI/CLOVER/config.plist
    2. EFI/CLOVER/misc/debug.log (Set config.plist/Boot/Debug/YES)
      1. or DPCIManager/Misc/Boot Log
  11. Speakers and/or micrrophine
    1. Headphones: DT770 250 Ohm // Turtle Beach X12’s (tested separately, no sound)
    2. Audio port connected: green jack
    3. Selection in System Preferences/Sound/Output or Input: Internal Speakers

I am fine with reinstalling if that seems like the right solution. I just want to be sure this problem wasn't a known issue with Asrock boards or something small.

Much Thanks!

 

Attachments

  • Asrock X99X support.zip
    1.5 MB · Views: 61
#490 need help
thank you.
 
kimcarsons said:
Multibeast is not working for audio on X79 UP4 in Yosemite
Click to expand...
MultiBeast audio is working
Audio is not working on your system.
Never a good idea to post other site non working solutions and request support.
Suggest a clean install using a method from Post #1, Realtek ALC AppleHDA.
Reply with new files.
 
Build 1
MAXIMUS VII IMPACT |  i7 4770K |  Radeon Other
Build 2
GA-Z97N-WiFi |  i5 5675C |  HD 6200
Hi toleda I ADD NEW FILES
My board is x99 gaming g1 wifi I load with chameleon and ssdt not work yet.
I install alc 1150 follew your guide.for 10.10.3
MultiBeast
MultiBeast 7 - Select: Drivers > Audio > Realtek ALC1150 > √ ALC
plus √ Optional Optional HDAEnabler > Audio ID: 1
restart
Patched Codec (select one method)
MultiBeast
5. Download/Double Click/audio_alc_x99-hda-100_patch.command.zip
6.Restart
still not work sound.all kext are loaded.
codec id
0x80868D20, 0x1458A036, 0x11020011, 0x0918, Creative CA0132
 

Attachments

  • FILES.zip
    16.7 MB · Views: 76
Hey, thanks for the quick response. I did try the X99 guide but didn't have any luck.

I'll try stuff over and move to the other thread. I wasn't sure where to post is all sorry about that.

Thank you
 
Hi tolida I update files can you look #500
thanks.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top