Contribute
Register

No Sound - Realtek ALC AppleHDA [Guide]

Status
Not open for further replies.
Joined
Jun 7, 2014
Messages
19
Motherboard
Asus H170M
CPU
i7 3,4 6700
Graphics
nVidia GT710
Mac
  1. iMac
Yes.
Ignored Post #1006.
See Realtek ALC AppleHDA/Post #1:
Unsupported/Non-working Realtek ALC AppleHDA
1. 100 Series/Intel High Definition Audio​
Alright, thanks.I have done the first stop with Multibeast and the front panel connection worked. but the second part
  • Disables HDEF/HDMI audio ssts
I am not sure how to do it. is this in the config.plist?
 
Joined
Aug 22, 2012
Messages
66
Motherboard
MSI Z170A SLI PLUS
CPU
i7-7700K
Graphics
GTX 1080
Mac
  1. MacBook Air
  2. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
  3. Other
So I have no audio at all and am completely lost. I've been using your ALC-120 Sierra command line but can't seem to get anything working with 898. I tried also using your HDMI/DP Command line but that was a no go also. After every mess up I have been deleting the Kext "realtekALC.kext" in the efi partition and restoring the default AppleHDA.kext under S/L/E with Kext Wizard. Help would be greatly appreciated.
 

Attachments

  • config.plist
    5.4 KB · Views: 225
  • ioreg.ioreg
    2.6 MB · Views: 158
  • SC.png
    SC.png
    713.2 KB · Views: 153
Joined
Feb 14, 2012
Messages
36
Motherboard
Gigabyte Z87X-OC
CPU
Intel Core i7-4790K LGA1150
Graphics
ATI Radeon 6870
Mac
  1. MacBook Pro
Classic Mac
Mobile Phone
  1. iOS
Hi toleda, thanks for all your hard work helping the community.

I've tried to get ALC892 supported in 10.12 by using audio_cloverALC-120_v1.0b0.command but I can't get it to work. I do have output devices listed, however there's no sound. I've tried playing music in iTunes, there's absolutely no sound. I have external speakers (Bose Companion 2 Series III speakers) connected to the rear green output and also tried the rear black output, same result. Also tried connecting headphones to the same outputs, same results.

It's important to note that there's no "Internal Speakers" output device listed, and when I start playing music in iTunes, I can see that sometimes the "Headphones" output changes to "Internal Speakers" very briefly, and then back to "Headphones" but there's no sound, not even static or crackling sounds. The only sound I hear is static when I physically disconnect the speakers from one output and connect it to other.

OS X version: Sierra 10.12
Motherboard model: Gigabyte Z87X-OC (Specifications)
Bios version: F7
Processor: Intel Core i7-4790K LGA1150
Graphics: NVIDIA GeForce GTX 750 Ti 2047 MB (using latest nvidia web drivers 367.15.10.05f01)

Terminal output from cloverALC:
Code:
Agreement
The audio_cloverALC-120 script is for personal use only. Do not distribute
the patch, any or all of the files or the resulting patched AppleHDA.kext
for any reason without permission. The audio_cloverALC-120 script is
provided as is and without any kind of warranty.

File: audio_cloverALC-120.command_v1.0b0
Release Mode
EFI partition is mounted
System Integrity Protection status: enabled (Custom Configuration).

Configuration:
    Apple Internal: disabled
    Kext Signing: disabled
    Filesystem Protections: disabled
    Debugging Restrictions: enabled
    DTrace Restrictions: enabled
    NVRAM Protections: enabled
    BaseSystem Verification: enabled

This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state.

OK to patch
Confirm Realtek ALC892 (y/n): y
Clover Audio ID Injection (y/n): y
Use Audio ID: 1 (y/n): y

Download ALC892 files ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 25585  100 25585    0     0  41467      0 --:--:-- --:--:-- --:--:-- 41466
Edit config.plist/Devices/Audio/Inject/1
Edit config.plist/SystemParameters/InjectKexts/YES
Download kext patches
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  1418  100  1418    0     0   3850      0 --:--:-- --:--:-- --:--:--  3853
Download config kext and install ...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  3665  100  3665    0     0  10121      0 --:--:-- --:--:-- --:--:-- 10124
Install /Volumes/EFI/EFI/CLOVER/kexts/10.12/realtekALC.kext
Install System/Library/Extensions/AppleHDA.kext/ALC892 zml files
Fix permissions ...
Kernel cache...
rebuilding //System/Library/PrelinkedKernels/prelinkedkernel
kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext
AppleDataSetManagement.kext - dependency for com.apple.iokit.IOAHCIBlockStorage lacks valid OSBundleCompatibleVersion.
AppleDataSetManagement.kext is missing dependencies (including anyway; dependencies may be available from elsewhere)
AppleDataSetManagement.kext - dependency for com.apple.iokit.IOAHCIBlockStorage lacks valid OSBundleCompatibleVersion.
KernelCache ID: DA019660FD9097A31E4A70BE3919A99B
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>
kextcache updated critical boot files, requesting launchd reboot

Install finished, restart required.
To save a Copy of this Terminal session: Terminal/Shell/Export Text As ...

IOReg: attached
System/Library/Extensions/AppleHDA.kext: attached

Screenshots
System Information/Hardware/Audio/Intel High Definition Audio (not Devices)
Screen Shot 2016-09-22 at 4.54.43 PM.png
System Preferences/Sound/Output
Screen Shot 2016-09-22 at 4.43.26 PM.png
EFI/CLOVER/config.plist: attached

Boot log:
Code:
0:100  0:100  MemLog inited, TSC freq: 3990762575
0:100  0:000
0:100  0:000  Now is 23.9.2016,  18:7:47 (GMT)
0:100  0:000  Starting Clover revision: 3763 on American Megatrends EFI
0:100  0:000  Build with: [Args: --no-lto -D NO_GRUB_DRIVERS_EMBEDDED | -D DISABLE_LTO -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12 | XCODE: 8.0]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,1D85E2FD-9FE5-455D-9FDC-B11CA328FC9F,0x28,0x64000) @B074D298
0:100  0:000  SelfDirPath = \EFI\CLOVER
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 0215
0:100  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:100  0:000  SmbiosTable.Type17->PartNumber = CMX8GX3M1A1600C11
0:100  0:000  Type 17 Index = 2
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 0215
0:100  0:000  SmbiosTable.Type17->SerialNumber = 00000000
0:100  0:000  SmbiosTable.Type17->PartNumber = CMX8GX3M1A1600C11
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'Z87X-OC' with board 'Z87X-OC-CF'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=306C3
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
0:100  0:000  MSR 0xE2 before patch 18000402
0:100  0:000  MSR 0xE4              00001814
0:100  0:000  MSR 0xCE              00080838_F3012800
0:100  0:000  non-usable FLEX_RATIO = F0000
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  FSBFrequency=105MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x3C/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 40.0/8
0:100  0:000  Turbo: 42/43/44/44
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 8
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 4200 MHz
0:100  0:000  TSC: 4200 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0C00 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0C01 class=060400
0:100  0:000  PCI (00|00:01.01) : 8086 0C05 class=060400
0:100  0:000  PCI (00|00:01.02) : 8086 0C09 class=060400
0:100  0:000  PCI (00|03:00.00) : 10DE 1380 class=030000
0:100  0:000   - GFX: Model=EVGA GeForce GTX 750 Ti family 117 (Nvidia)
0:100  0:000  PCI (00|03:00.01) : 10DE 0FBC class=040300
0:100  0:000   - HDMI Audio:
0:100  0:000  PCI (00|00:14.00) : 8086 8C31 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 8C3A class=078000
0:100  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:100  0:000  PCI (00|00:19.00) : 8086 153B class=020000
0:100  0:000   - LAN: 0 Vendor=Intel
0:100  0:000  PCI (00|00:1A.00) : 8086 8C2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 8C20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 8C10 class=060400
0:100  0:000  PCI (00|00:1C.04) : 8086 244E class=060401
0:100  0:000  PCI (00|05:00.00) : 8086 244E class=060401
0:100  0:000  PCI (00|00:1C.05) : 8086 8C1A class=060400
0:100  0:000  PCI (00|07:00.00) : 168C 0030 class=028000
0:100  0:000   - WIFI: Vendor=Atheros
0:100  0:000  PCI (00|00:1D.00) : 8086 8C26 class=0C0320
0:100  0:000  PCI (00|00:1F.00) : 8086 8C44 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 8C02 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 8C22 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 72 bytes
0:100  0:000  Clover started with option to boot boot.efi from Install OS X El Capitan
0:102  0:001  , Status=Success
0:102  0:000  EFI\CLOVER\config.plist loaded: Success
0:102  0:000  === [ GetListOfThemes ] ===================================
0:104  0:002  - [00]: applestyle
0:107  0:003  - [01]: BOOTCAMP
0:110  0:002  - [02]: EMBEDDED
0:111  0:001  - [02]: RANDOM
0:112  0:001  === [ GetEarlyUserSettings ] ==============================
0:112  0:000  timeout set to 3
0:112  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:112  0:000  KextsToPatch: 3 requested
0:112  0:000   - [00]: AppleHDA (t1-10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4
0:112  0:000   - [01]: AppleHDA (t1-10.9-10.12-AppleHDA/Realtek ALC892) :: BinPatch :: data len: 4
0:112  0:000   - [02]: AppleHDA (t1-AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6
0:112  0:000  Default theme: tonymacx86
0:112  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:112  0:000  Hiding entries with string Windows
0:112  0:000  === [ LoadDrivers ] =======================================
0:113  0:001  Loading FSInject-64.efi  status=Success
0:114  0:001  Loading OsxAptioFix2Drv-64.efi  status=Success
0:116  0:001  Loading OsxFatBinaryDrv-64.efi  status=Success
0:117  0:001  Loading VBoxHfs-64.efi  status=Success
0:118  0:001   - driver needs connecting
0:118  0:000  1 drivers needs connecting ...
0:118  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:118  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:217  0:098  Dump SMC keys from NVRAM:
0:221  0:004  === [ InitScreen ] ========================================
0:221  0:000  SetScreenResolution: 1920x1080 - not found!
0:221  0:000  SetMaxResolution: found best mode 3: 1280x1024
0:431  0:210  Video mode change to mode #3: Success
0:431  0:000   - set
0:431  0:000  Console modes reported: 4, available modes:
0:431  0:000   - [01]: 80x25 (current mode)
0:431  0:000   - [02]: 80x50
0:431  0:000   - [03]: 100x31
0:431  0:000   - [04]: 128x30
0:431  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,1D85E2FD-9FE5-455D-9FDC-B11CA328FC9F,0x28,0x64000)
1:191  0:759  === [ GetMacAddress ] =====================================
1:191  0:000  MAC address of LAN #0= 74:D4:35:88:C4:31:
1:191  0:000  === [ ScanSPD ] ===========================================
1:191  0:000  SMBus device : 8086 8C22 class=0C0500 status=Success
1:191  0:000  SMBus CmdReg: 0x1
1:191  0:000  Scanning SMBus [8086:8C22], mmio: 0xF3235004, ioport: 0xF000, hostc: 0x1
1:191  0:000  Slots to scan [8]...
1:192  0:000  SPD[1]: Type 11 @0x51
1:210  0:018  XMP Profile1: 10*1/8ns
1:210  0:000  Found module with XMP version 1.3
1:210  0:000  DDR speed 1333MHz
1:210  0:000  Slot: 1 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CMX8GX3M1A1600C11 SerialNo=0000000000000000
1:210  0:000  SPD[3]: Type 11 @0x53
1:228  0:018  XMP Profile1: 10*1/8ns
1:228  0:000  Found module with XMP version 1.3
1:228  0:000  DDR speed 1333MHz
1:228  0:000  Slot: 3 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CMX8GX3M1A1600C11 SerialNo=0000000000000000
1:229  0:000  === [ GetAcpiTablesList ] =================================
1:229  0:000  Get Acpi Tables List from RSDT:
1:229  0:000   - [00]: FACP  A M I len=132
1:229  0:000   - [01]: APIC  A M I len=146
1:229  0:000   - [02]: FPDT  A M I len=68
1:229  0:000   - [03]: SSDT  Cpu0Ist len=1337
1:229  0:000   - [04]: SSDT  CpuPm len=2776
1:229  0:000   - [05]: MCFG   len=60
1:229  0:000   - [06]: HPET  A M I len=56
1:229  0:000   - [07]: SSDT  SataTabl len=877
1:229  0:000   - [08]: SSDT  SaSsdt  len=12953
1:229  0:000   - [09]: BGRT  A M I len=56
1:229  0:000   - [10]: DMAR  HSW  len=128
1:229  0:000   - [11]: MATS  A M I len=52
1:229  0:000  Calibrated TSC frequency =3990762575 =3990MHz
1:229  0:000  === [ GetUserSettings ] ===================================
1:229  0:000  USB FixOwnership: no
1:229  0:000   - final DSDT Fix mask=00000000
1:229  0:000  ChassisType: 0xD
1:229  0:000  Using smbios.plist at path: EFI\CLOVER\smbios.plist, Status=Not Found
1:231  0:001  === [ ScanVolumes ] =======================================
1:231  0:000  Found 8 volumes with blockIO
1:231  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)
1:231  0:000          Result of bootcode detection: bootable unknown (legacy)
1:231  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
1:231  0:000          Found optical drive
1:231  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)
1:232  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(1,GPT,463C85AD-13EB-4A20-8B3D-3BDA6286B88A,0x28,0x64000)
1:232  0:000          Result of bootcode detection: bootable unknown (legacy)
1:273  0:040  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(2,GPT,E947CB62-2372-49A8-94E4-B12CB26FA078,0x64028,0x74662D60)
1:273  0:000          Result of bootcode detection: bootable unknown (legacy)
1:273  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,1D85E2FD-9FE5-455D-9FDC-B11CA328FC9F,0x28,0x64000)
1:274  0:000          Result of bootcode detection: bootable unknown (legacy)
1:279  0:005          This is SelfVolume !!
1:279  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,B368AC9E-7616-40F2-8371-D42A9B51C487,0x64028,0xECE2340)
1:280  0:000  - [07]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,DA66DDD5-38C0-4525-8B08-F83A65B5BE2A,0xED46368,0x135F20)
1:280  0:000  === [ InitTheme ] =========================================
1:280  0:000  GlobalConfig: theme.plist not found, get random theme BOOTCAMP
1:281  0:001  Using theme 'BOOTCAMP' (EFI\CLOVER\themes\BOOTCAMP)
1:281  0:000  Warning! Character width 9 should be even!
1:282  0:000  Choosing theme BOOTCAMP
1:282  0:000  after NVRAM boot-args=dart=0
1:282  0:000  === [ AddCustomLegacy ] ===================================
1:282  0:000  Scanning legacy ...
1:282  0:000   0: 'Whole Disc Boot' (legacy) not legacy
1:282  0:000   1: 'Whole Disc Boot' (legacy) not legacy
1:282  0:000   2: 'Whole Disc Boot' (legacy) not legacy
1:282  0:000   3: 'EFI' (legacy) not legacy
1:282  0:000   4: 'Tomb' (legacy) not legacy
1:282  0:000   5: 'EFI' (legacy) not legacy
1:282  0:000   6: 'El Capitan' (legacy) not legacy
1:282  0:000   7: 'Recovery HD' (legacy) not legacy
1:282  0:000  === [ ScanLoader ] ========================================
1:282  0:000  - [03]: 'EFI'
1:282  0:000  - [04]: 'Tomb'
1:360  0:078          AddLoaderEntry for Volume Name=Tomb
1:388  0:027  - [05]: 'EFI'
1:388  0:000  - [06]: 'El Capitan'
1:398  0:009          AddLoaderEntry for Volume Name=El Capitan
1:404  0:006          Check if volume Is Hibernated:
1:404  0:000      Check sleep image 'by signature':
1:410  0:006      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
1:410  0:000      using default sleep image name = \private\var\vm\sleepimage
1:416  0:005      Reading first 512 bytes of sleepimage ...
1:416  0:000   OurBlockIoRead: Lba=C9A51C0, Offset=1934A38000 (BlockSize=512)
1:416  0:000   sig lion: 0
1:416  0:000   sig snow: 0
1:416  0:000   no valid sleep image offset was found
1:416  0:000      Reading completed -> Success
1:416  0:000       sleepimage offset could not be acquired
1:416  0:000          hibernated: no - sign
1:417  0:000  - [07]: 'Recovery HD'
1:418  0:001          AddLoaderEntry for Volume Name=Recovery HD
1:421  0:002  === [ AddCustomTool ] =====================================
1:422  0:001  found tool \EFI\CLOVER\tools\Shell64U.efi
1:422  0:000  Checking EFI partition Volume 3 for Clover
1:434  0:011  Checking EFI partition Volume 5 for Clover
1:435  0:000   Found Clover
1:438  0:003  === [ FindDefaultEntry ] ==================================
1:438  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
1:438  0:000   - efi-boot-device-data: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,B368AC9E-7616-40F2-8371-D42A9B51C487,0x64028,0xECE2340)
1:438  0:000    - Volume: 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,B368AC9E-7616-40F2-8371-D42A9B51C487,0x64028,0xECE2340)'
1:438  0:000    - LoaderPath: '<null string>'
1:438  0:000    - Guid = B368AC9E-7616-40F2-8371-D42A9B51C487
1:438  0:000  === [ FindStartupDiskVolume ] =============================
1:438  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,B368AC9E-7616-40F2-8371-D42A9B51C487,0x64028,0xECE2340)
1:438  0:000     - searching for that partition
1:438  0:000      - found entry 1. 'Boot Mac OS X from El Capitan', Volume 'El Capitan'
1:438  0:000  Boot redirected to Entry 1. 'Boot Mac OS X from El Capitan'
1:438  0:000  DefaultIndex=1 and MainMenu.EntryCount=9
1:438  0:000  Use anime=logo_3D frames=50
1:538  0:100  Found Mouse device:
1:540  0:001  GUI ready
5:551  4:011  === [ StartLoader ] =======================================
5:551  0:000  Finally: Bus=99769kHz CPU=3991MHz
5:551  0:000  Loading boot.efi  status=Success
5:732  0:181  GetOSVersion: 10.12 (16A323)
5:732  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS
5:732  0:000  Filtering KextPatches:
5:732  0:000   - [00]: AppleHDA (t1-10.12-AppleHDA/Realtek ALC...) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
5:732  0:000   - [01]: AppleHDA (t1-10.9-10.12-AppleHDA/Realtek ALC892) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
5:732  0:000   - [02]: AppleHDA (t1-AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
5:732  0:000  === [ PatchSmbios ] =======================================
5:732  0:000  insert table 9 for dev 0:0
5:732  0:000  insert table 9 for dev 0:1
5:732  0:000  insert table 9 for dev 19:0
5:732  0:000  insert table 9 for dev 0:0
5:733  0:000  Channels: 2
5:733  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
5:733  0:000  SMBIOS Type 17 Index = 0 => 0 0:
5:733  0:000  BANK0 DIMM0 EMPTY
5:733  0:000  SMBIOS Type 17 Index = 1 => 2 2:
5:733  0:000  BANK1 DIMM0 EMPTY
5:733  0:000  SMBIOS Type 17 Index = 2 => 1 1:
5:733  0:000  BANK0 DIMM1 1333MHz 8192MB
5:733  0:000  SMBIOS Type 17 Index = 3 => 3 3:
5:733  0:000  BANK1 DIMM1 1333MHz 8192MB
5:733  0:000  mTotalSystemMemory = 16384
5:733  0:000  NumberOfMemoryDevices = 4
5:733  0:000  Type20[0]->End = 0x7FFFFF, Type17[2] = 0x2000
5:733  0:000  Type20[1]->End = 0xFFFFFF, Type17[3] = 0x6000
5:733  0:000  Table 131 is present, CPUType=31
5:733  0:000  Change to: 705
5:733  0:000  === [ PatchACPI ] =========================================
5:733  0:000  RSDT 0xBE69C028
5:733  0:000  FADT from RSDT: 0xBE69C118
5:733  0:000  XSDT 0xBE69C080
5:733  0:000  FADT from XSDT: 0xBE6A7300
5:733  0:000  Xsdt reallocation done
5:733  0:000  old FADT length=10C
5:733  0:000  Apply DsdtFixMask=0x00000000 old way
5:733  0:000     drop _DSM mask=0x0000
5:733  0:000  === [ FixBiosDsdt ] =======================================
5:733  0:000  VideoCard devID=0x138010DE
5:733  0:000  DisplayADR1[0] = 0x10002, DisplayADR2[0] = 0x0
5:733  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
5:733  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
5:982  0:249  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
5:982  0:000  Found Airport Atheros at 0x1C0005, 0x0, DeviceID=0x0030
5:982  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
5:982  0:000  first CPU found at 77E9 offset 77EC
5:982  0:000  score candidate at 77E5
5:982  0:000  score inserted in acpi_cpu_score _PR_
5:982  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
5:982  0:000  Found PCIROOTUID = 0
5:982  0:000  === [ ACPIDropTables ] ====================================
5:982  0:000  === [ PatchAllSSDT ] ======================================
5:982  0:000  Patch table: SSDT  Cpu0Ist
5:982  0:000   SSDT len = 0x539
5:982  0:000  Patch table: SSDT  CpuPm
5:982  0:000   SSDT len = 0xAD8
5:982  0:000  Patch table: SSDT  SataTabl
5:982  0:000   SSDT len = 0x36D
5:982  0:000  Patch table: SSDT  SaSsdt
5:982  0:000   SSDT len = 0x3299
5:982  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
5:982  0:000   Xsdt has tables count=12
5:982  0:000  corrected XSDT length=132
5:982  0:000  === [ ACPIPatchedAML ] ====================================
5:982  0:000  Start: Processing Patched AML(s): Unsorted
5:982  0:000  Inserting SSDT.AML from EFI\CLOVER\ACPI\patched ... Success
5:983  0:001  End: Processing Patched AML(s)
5:983  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
5:983  0:000  === [ RestSetupOSX ] ======================================
5:983  0:000  EdidDiscovered size=128
5:983  0:000  00 | 00 FF FF FF FF FF FF 00 04 69 A3 27 A7 D4 00 00
5:983  0:000  16 | 02 17 01 03 81 3C 22 78 2A A5 95 AA 54 4F A1 26
5:983  0:000  32 | 0A 50 54 B7 EF 00 D1 C0 B3 00 95 00 81 80 81 40
5:983  0:000  48 | 81 00 81 C0 71 4F 56 5E 00 A0 A0 A0 29 50 30 20
5:983  0:000  64 | 35 00 55 50 21 00 00 1A 00 00 00 FF 00 44 31 4C
5:983  0:000  80 | 4D 54 46 30 35 34 34 33 39 0A 00 00 00 FD 00 32
5:983  0:000  96 | 4B 18 63 21 00 0A 20 20 20 20 20 20 00 00 00 FC
5:983  0:000  112 | 00 41 53 55 53 20 50 42 32 37 38 0A 20 20 00 E6
5:983  0:000  NVidia GFX injection not set
5:984  0:000  HDA Controller [8086:8C20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
5:984  0:000  stringlength = 540
5:984  0:000  CurrentMode: Width=1280 Height=1024
5:984  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: B074D018
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: B074D018
5:987  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
5:988  0:001    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
5:993  0:004    Extra kext: EFI\CLOVER\kexts\Other\AppleIntelE1000e.kext
6:000  0:007  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12
6:003  0:002    Extra kext: EFI\CLOVER\kexts\10.12\realtekALC.kext
6:005  0:002  SetStartupDiskVolume:
6:005  0:000    * Volume: 'El Capitan'
6:005  0:000    * LoaderPath: '<null string>'
6:006  0:000    * DevPath: El Capitan
6:006  0:000    * GUID = B368AC9E-7616-40F2-8371-D42A9B51C487
6:006  0:000    * efi-boot-device: <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>B368AC9E-7616-40F2-8371-D42A9B51C487</string></dict></dict></dict></array>
6:006  0:000  Custom boot is disabled

Speakers and/or microphone: Bose Companion 2 Series III speakers
Audio port connected (color, motherboard or case): tried both green and black outputs from motherboard. Normally connected to green output in motherboard.
Selection in System Preferences/Sound/Output: tried both Line Outs and Headphones. There's no Internal Speakers option in my output devices.
 

Attachments

  • Minas Tirith.ioreg
    3.3 MB · Views: 102
  • AppleHDA.kext.zip
    1.7 MB · Views: 74
  • config.plist
    4.8 KB · Views: 214
Joined
Feb 14, 2012
Messages
36
Motherboard
Gigabyte Z87X-OC
CPU
Intel Core i7-4790K LGA1150
Graphics
ATI Radeon 6870
Mac
  1. MacBook Pro
Classic Mac
Mobile Phone
  1. iOS
Front panel connector failure, Headphones mutes motherboard green port.
Thanks! So if I understand correctly, my motherboard is not connected properly to the case front panel?
 
Joined
Feb 14, 2012
Messages
36
Motherboard
Gigabyte Z87X-OC
CPU
Intel Core i7-4790K LGA1150
Graphics
ATI Radeon 6870
Mac
  1. MacBook Pro
Classic Mac
Mobile Phone
  1. iOS
No, if nothing is plugged into the front panel, the connector has failed.
Man you rock. I unplugged the front panel from the motherboard and it started working right away! Seems like my connector has failed because there was nothing plugged in the front panel (it's never used)
 
Joined
Feb 28, 2012
Messages
3
Motherboard
GA-H81M-HD3
CPU
Intel Core i3 3.39GHz
Graphics
ATI Radeon HD5570
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
Hi.
When I run a command I get

File: audio_cloverALC-120.command_v1.0b0
Release Mode
EFI partition is mounted
System Integrity Protection status: disabled.

OK to patch

No audio codec detected

Into devices I always see Mobiola.

What's the problem?

ALC892
MB GA-H81M-HD3.
macOS Sierra
native AppleHDA installed
 

Attachments

  • Screenshoot 2016-09-28 in 10.00.55.png
    Screenshoot 2016-09-28 in 10.00.55.png
    9 KB · Views: 107
Status
Not open for further replies.
Top