Contribute
Register

Solved > No signal after install NVIDIA Web Driver

Joined
Mar 5, 2019
Messages
3
Motherboard
Gigabyte H110M-S2H
CPU
i5-6600
Graphics
GTX 1060
Hello everyone.

When I install the nvidia web driver and reboot, the monitor loses signal but the macos working properly.
I enabled the screen sharing and i see the graphics card is detected correctly but the monitor is not.
If i use the nv_disable=1 boot param the monitor is detected correctly but the GPU is not.
I use LG monitor over HDMI cable.
What is the solution for this problem?
(Sorry my english is bad)
 

Attachments

Last edited:

P1LGRIM

Moderator
Joined
Mar 2, 2012
Messages
21,734
Motherboard
Lenovo ThinkStation p300 ⌘
CPU
i7-4790K
Graphics
HD 4600
Mac
MacBook Pro, Mac mini
Classic Mac
Power Mac
Mobile Phone
iOS
There are no Mojave drivers for a GTX 1060.

What is the solution for this problem?
Use supported hardware or install an operating system that supports your existing hardware (High Sierra).
Or remove the graphics card and use the processor's integrated graphics.
 
Joined
Mar 5, 2019
Messages
3
Motherboard
Gigabyte H110M-S2H
CPU
i5-6600
Graphics
GTX 1060
I tried Sierra, High Sierra but same problem.
 

P1LGRIM

Moderator
Joined
Mar 2, 2012
Messages
21,734
Motherboard
Lenovo ThinkStation p300 ⌘
CPU
i7-4790K
Graphics
HD 4600
Mac
MacBook Pro, Mac mini
Classic Mac
Power Mac
Mobile Phone
iOS
Joined
Mar 5, 2019
Messages
3
Motherboard
Gigabyte H110M-S2H
CPU
i5-6600
Graphics
GTX 1060
I tried again the High Sierra and now it work.
Thanks @P1LGRIM

Update: When i use HDMI1 input on my monitor has no signal but on the HDMI2 and HDMI3 input has signal.
 
Last edited:
Top