- Joined
- Mar 2, 2019
- Messages
- 8
- Motherboard
- Intel NUC8i7BEH
- CPU
- i7-8559U
- Graphics
- Iris Plus 655
- Mac
- Mobile Phone
Hi! I spent a few hours trying to install Mojave on my new Intel NUC8i7BEH and I finally got it working (thanks so much to @Vanessag for sharing those files on this post, nothing was working until I saw your comment).
So my problem is the following. When I was installing Mojave on the SSD, it asked me to configure the ethernet connection. I selected DHCP and the computer halted suddenly. Then I tried again skipping the ethernet configuration and now everything worked.
But now I can't see any ethernet device, I tried several things like reinstalling
I did got internet working with an Ethernet to USB adaptor (this was plug and play) and this one does show up on System Information > Ethernet Cards.
Am I missing something? Is there anyway to make ethernet work with the actual cable? Thank you in advance!
Intel NUC8i7BEH
Intel Iris Plus Graphics 655 1536 MB
32 GB 2667 MHz DDR4
So my problem is the following. When I was installing Mojave on the SSD, it asked me to configure the ethernet connection. I selected DHCP and the computer halted suddenly. Then I tried again skipping the ethernet configuration and now everything worked.
But now I can't see any ethernet device, I tried several things like reinstalling
IntelMausiEthernet.kext
or installing other kext file but still not working. When I go to System Information it shows "No ethernet cards are installed...".I did got internet working with an Ethernet to USB adaptor (this was plug and play) and this one does show up on System Information > Ethernet Cards.
Am I missing something? Is there anyway to make ethernet work with the actual cable? Thank you in advance!
Intel NUC8i7BEH
Intel Iris Plus Graphics 655 1536 MB
32 GB 2667 MHz DDR4