Contribute
Register

No Audio Devices - Realtek ALC AppleHDA [Guide]

Status
Not open for further replies.
Joined
Dec 23, 2012
Messages
155
Motherboard
Gigabyte Z170 HD3P
CPU
6700K @ 4GHz
Graphics
Pascal Titan X
Mac
  1. iMac
  2. MacBook Air
Classic Mac
  1. iMac
Mobile Phone
  1. iOS
Script: Error: no IOReg/HDEF; BIOS/audio/disabled or ACPI problem
MacOS does not support Intel 100 Series Audio.
See Post #1, "Unsupported/Non working Realtek ALC AppleHDA..."
Today I booted and... audio works o_O I promise I hadn't done anything since my last reboot yesterday. My last try was MultiBeast for installing ALC887 together with 100 Series. I rebooted and I didn't have audio. Then I prepared all the attached files above and switched off the computer. Today I boot it and it works.

Do you have any idea of what could have happened here? Should I consider audio is fixed, or could it disappear as magically as it appeared?
 
Joined
Dec 22, 2016
Messages
60
Motherboard
Gigabyte GA-Z370N-Wifi
CPU
i3-8100
Graphics
UHD 630
No Audio Devices/Problem Reporting
  1. I am having a terrible time getting HDMI audio working on my newest Hackintosh (#4, if I can get everything working, I'm going to make MANY more of them, going to clone them like they are freaking cylons!!!)
  2. OSX 10.12.6. Gigabyte GA-h270N-Wifi. BIOS Version F6, 7600, HD 630
  3. Multibeast. Realtek ALC1220 & 100/200 Series Audio (See attachment "3. Multibeast Drivers") NOTE: All the attachments are included in one .zip file
  4. See attachment "4. Audio_codecdetect"
  5. See attachment "5. IOReg mille1j"
  6. See attachment "6. AppleHDA.kext"
  7. Does not apply
  8. Searched console-No sound assertions found
  9. See attachments "9. DPCIManager Status" & "9a. System Information Intel HD Audio"
  10. See attachment "10. audio_cloverALC-120" . NOTE: says Device ID 0x12590000 not supported and No system files were changed
  11. No Chameleon
  12. See attachments "12-1 config.plist", "12-2 DPCIManager Boot Log", No DSDT patches, "12-4 ACPI SSDT patches"
 

Attachments

  • mille1j No Audio Devices Problem Reporting .zip
    6.6 MB · Views: 57
Last edited:
Joined
May 10, 2014
Messages
41
Motherboard
Gigabyte GA-Z87M-D3H
CPU
i7-4770K
Graphics
AMD 5700 XT 8GB
Mac
  1. iMac
  2. MacBook Pro
  3. Mac mini
  4. Mac Pro
Mobile Phone
  1. Android
  2. iOS
PROBLEM REPORTING

1. NO audio device output option appears in system preference.
2. OSX Sierra 10.12 / GA-Z87M-D3H / F4 / i7-4770K / GeForce GTX 760
3. Procedure- Audio_CloverALC-120 script (attached #3)
4. ALC Injection (attached #4)
5. IOReg (attached #5)
6. AppleHDA.kext (attached)
7. None
8. Console - NOTHING
9. Screenshots (#9a/#9b)
10. (attached #3)
11. no
12. (attached)

Much needed help. Thanks
 

Attachments

  • zalee.zip
    2.6 MB · Views: 69
Joined
May 10, 2014
Messages
41
Motherboard
Gigabyte GA-Z87M-D3H
CPU
i7-4770K
Graphics
AMD 5700 XT 8GB
Mac
  1. iMac
  2. MacBook Pro
  3. Mac mini
  4. Mac Pro
Mobile Phone
  1. Android
  2. iOS
Installed audio to a different EFI partition than Clover boots. Mount correct EFI partition and run cloverALC.

toleda, thanks! it's working now!

p/s had to remove the boot USB disk before I mount the EFI. That was the issue all along! :)
 
Last edited:
Joined
Jan 31, 2017
Messages
1
Motherboard
Msi z170a Gaming Pro Carbon
CPU
Intel Core i7 6700k
Graphics
Evga GTX 980 KingPin 4gb
No Audio Devices/Problem Reporting

1. NO audio device output option appears in system preference, everything else working fine.
2. OSX Sierra 10.12.6 / Msi z170a Gaming Pro Carbon / 1.8 / i7 6700k / Gtx 980
3. Procedure: Multibeast with audio options ALC1150 and 100/200 series audio
4. Attached
5. Attached
6. Attached
7. None
8. None
9. Dpci Status screenshot
10. Not used
11. None
12. Boot log and config.plist attached

Thanks for all your help!
 

Attachments

  • files.zip
    2.5 MB · Views: 66

toleda

Moderator
Joined
May 19, 2010
Messages
22,935
Motherboard
Asus Maximus VII Impact
CPU
Core i7-4770K
Graphics
RX 560 + HD4600
Mac
  1. iMac
  2. MacBook Pro
  3. Mac mini
Classic Mac
  1. 512K
  2. LC
  3. Power Mac
Mobile Phone
  1. iOS
NO audio device output option
Script:
Audio ID: Not supported
Current Audio ID: 7 (valid: 1, 2, or 3)

Boot log:
5:373 0:000 setting specified layout-id=7 (0x7)

config.plist:
Devices/Audio/Inject/2

No idea where Audio ID: 7 is set (DSDT?/SSDT?, not attached)
Correct Audio ID: 1, for your system.
Find and fix.
Reply with new files.
 
Joined
Sep 16, 2011
Messages
185
Motherboard
Mac OS X Lion 10.9.3
CPU
i7 4770k
Graphics
HD4600 1 Gb + nVidia GTX 650ti 2Gb
Mac
  1. iMac
Classic Mac
  1. Power Mac
Mobile Phone
  1. iOS
Hello Toleda

I needs help if is possible for enable the onboard audio ... adds the required data for your analisys

Troubles for fix
No audio codec detected
No HDEF section present on IORegistryExplorer
No HDSA section present on IORegistryExplorer
No AZAL section present on IORegistryExplorer

Present on the IORegistryExplorer as pci8086,1d20@1B

My attempt
I attempted add the section HDEF using this guide https://github.com/toleda/audio_ALCInjection/blob/master/[Guide]-Add_HDEF-Clover.pdf that basicaly is
1 - From the BIOS the codec audio is AZAL then from the config.plist —> ACPI —> Patches adds the patch “changes AZAL to HDEF”
2 - config.plist —> ACPI —> Fixes adds “AddDTGP_0001 and FixHDA_8000
3 - config.plist —> Devices —> Audio —> Inject 1

and i had not luck

I not use Windows but i did a fresh install with windows and the audio onboard works
Previously i had installed the Mavericks and onboard audio worked

Reset codec: no luck

Ideas?

Data required
SO: 10.9.5
Motherboard: Gigabyte GA-X79-UD3 rev 1.0
BIOS version: f20
Processor: i7 3930K
Graphics card: EVGA GeForce GTX 570 HD
Procedure guide: I would like use this guide with the clover script command https://www.tonymacx86.com/threads/audio-realtek-alc-applehda-guide.143757/#post886744
audio_codecdetect_v2.2.command files: attached
IOReg file attached
AppleHDA.kext: is native attached
AppleHDAxxx.kext: no present
Kernel Sound Assertions: no present
DPCI screenshot: attached
DPCI.png
System information screenshot: attached
System Information.png
audio_cloverALC-120...command: terminal output file attached
config.plist: attached
DPCI boot log: attached
No dsdt
No ssdt

Greetings
 

Attachments

  • Terminal Output - codecdetect comand.zip
    834 bytes · Views: 68
  • Java Lava.ioreg.zip
    472.4 KB · Views: 58
  • AppleHDA.kext.zip
    1.3 MB · Views: 61
  • Terminal Output - cloverALC command.zip
    1 KB · Views: 56
  • config.plist.zip
    3.8 KB · Views: 69
  • DPCI Boot Log.rtf.zip
    6 KB · Views: 60
Status
Not open for further replies.
Top