No Audio Devices - Realtek ALC AppleHDA [Guide]

[littlegreen]

Not a clue. A reply with some of the attachments is a waste of time. Attach all requested files.

Apologies. All the files attachedView attachment new files.zip

 

[toleda]

All the files attached

Ran 2 different scrips without a restore between.
Patched HDEF 2x, remove one:
1. config.plist/ACPI/DSDT/Patches/Rename HDAS to HDEF
2. EFI/CLOVER/ACPI/patched/SSDT-3.aml
Restart
Clover boot log missing. Reply with new files.

 

[littlegreen]

Ran 2 different scrips without a restore between.
Patched HDEF 2x, remove one:
1. config.plist/ACPI/DSDT/Patches/Rename HDAS to HDEF
2. EFI/CLOVER/ACPI/patched/SSDT-3.aml
Restart
Clover boot log missing. Reply with new files.

Cleaned up the config.plist entirely. Removed DSDT, re-ran script. (just the one this time )
Updated files attached. Thanks.View attachment latest files.zip

 

[toleda]

Removed DSDT, re-ran script.

No dsdt to remove.
script error: Audio ID: 0 is not supported, continue (y/n): y
patch error: AppleHDA patch missing

Looks like script is patching one EFI partition and system is booting a different EFI partition.
Reply with Terminal/diskutil list

 

[littlegreen]

No dsdt to remove.
script error: Audio ID: 0 is not supported, continue (y/n): y
patch error: AppleHDA patch missing

Looks like script is patching one EFI partition and system is booting a different EFI partition.
Reply with Terminal/diskutil list

I meant SSDT, apologies.

[FONT=Monaco]Last login: Wed Dec 23 22:41:20 on consoleFranks-iMac:~ littlegreen$ diskutil list[/FONT]
[FONT=Monaco]/dev/disk0 (internal, physical):[/FONT]
[FONT=Monaco]   #:                       TYPE NAME                    SIZE       IDENTIFIER[/FONT]
[FONT=Monaco]   0:      GUID_partition_scheme                        *120.0 GB   disk0[/FONT]
[FONT=Monaco]   1:                        EFI EFI                     209.7 MB   disk0s1[/FONT]
[FONT=Monaco]   2:                  Apple_HFS MacDisk                 119.2 GB   disk0s2[/FONT]
[FONT=Monaco]   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3[/FONT]
[FONT=Monaco]Franks-iMac:~ littlegreen$ [/FONT]

I usually do "diskutil mount disk0s1"
Should I mkdir first?

Or should I copy the script to the EFI partition and run it from there?

 

[toleda]

Should I mkdir first?
Or should I copy the script to the EFI partition and run it from there?

No. No.
config.plist/Devices/Audio/Inject/1 is not working
config.plist/KernelAndKextPatches/KextsToPatch/10.11 AppleHDA patch is missing

Important, Audio ID: 1
Consider a clean install

 

[littlegreen]

No. No.
config.plist/Devices/Audio/Inject/1 is not working
config.plist/KernelAndKextPatches/KextsToPatch/10.11 AppleHDA patch is missing

Important, Audio ID: 1
Consider a clean install

Erased the disk using Disk Utility, then re-partition. Did a clean install. Ran the script - same result.
script name: audio_cloverALC-110_v1.0n10.command

Files attached

View attachment littlegreen_Latest files.zip

EDIT: Diskutil list in terminal outputs:

[FONT=Menlo]Last login: Fri Dec 25 17:19:20 on console[/FONT]
[FONT=Menlo]Franks-iMac:~ littlegreen$ diskutil list[/FONT]
[FONT=Menlo]/dev/disk0 (internal, physical):[/FONT]
[FONT=Menlo]   #:                       TYPE NAME                    SIZE       IDENTIFIER[/FONT]
[FONT=Menlo]   0:      GUID_partition_scheme                        *120.0 GB   disk0[/FONT]
[FONT=Menlo]   1:                        EFI EFI                     209.7 MB   disk0s1[/FONT]
[FONT=Menlo]   2:                  Apple_HFS Intel                   119.2 GB   disk0s2[/FONT]
[FONT=Menlo]   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3[/FONT]
[FONT=Menlo]Franks-iMac:~ littlegreen$ [/FONT]

EDIT2: Should I consider different system definition? Or bootloader update? I am using Clover 3320 atm. iMac17,1 SMBIOS.

 

[PlatypusPlatoon]

I just wanted to say, thank you to everyone in this community for all of your hard work. This is my first Hackintosh build, and I've only made it this far because of everyone's generous contributions on this thread and site. Still very much a neophyte at this but I wanted to make it shown that I really appreciate all the work that's been put in!

Okay, onto my audio problem...

1. No audio devices
2. Yosemite 10.10 / Gigabye H97M-D3H / F5 / Intel i5-4440 / EVGA Geforce GTX660
3. Multibeast 7.3: ALC892
4. Attached
5. Attached
6. None
7. None (searched separately for "kernel" and "Sound Assetions", came up empty)
8. Attached
9. N/A
10.1 Attached

View attachment platypusaudio.zip

 

[maxmizer]

I have No input/output devices

1. No audio devices
2. El Capitan 10.11.2 (15C50) Asus p8p67 rev 3.1 bios 3602, nvidia 550ti, alc892
3. MultiBeast 8.0.1, Audio -> ALC892 doesn't work "failed"
4. Attached
5. Original native
6. Toleda 1 Attached
7. Attached
8. Attached
9. no script used
10. no chimera used
11. Attached


i try toleda "all system with clover and hdaenabler1" but but never work
appleHDA is original

attached IOreg new 27_12_215 and console sound assertation

 

[toleda]

Did a clean install. Ran the script - same result.

Clover is not injecting config.plist/Devices/Audio/Inject/1
Fix:
Remove config.plist/ACPI/DSDT/Patches/Item 0 (Rename HDAS to HDEF)
Install ssdt_hdef-1-100-hdas.zip
Reply with new files