No Audio Devices - Realtek ALC AppleHDA [Guide]

[toleda]

I tried, installed ALC 1150 and it's not working.

Files???

 

[Dexxter]

Files???

You need the same files again? Here is the extra info. Running El Capitan 10.11.1.

Do you need anything else from me?

Also, I installed ACL1150, but there is no kext for that in Extensions.
View attachment AppleHDA.kext.zip
View attachment config.plist
View attachment iMac.ioreg
View attachment RealtekRTL8111.kext.zip

 

[toleda]

You need the same files again?
installed ACL1150, but there is no kext for that in Extensions.

IOReg is different every time you boot. How useful is any previously attached IOReg?
No ALC1150 kext
config.plist is damaged.

Fix: download (View Raw) audio_cloverALC-110.command.zip, double click .command file.
Answer y to questions until
Use Audio ID: 0 (y/n): n
Audio IDs:
1 ...
2 ...
3 ...
Select Audio ID: 1

Reply with new files.

 

[waterproofpiano]

See Post #1, 4. No layout-id or not valid (<00 00 00 00>), select one method and implement

I realize I failed to implement the proper problem reporting, so let remedy this:
1. Saw no Codec ID, and so I reinstalled the native AppleHDA.kext again. This time it worked, and I saw my Codec ID and can see a layout-id. However, I still don't have any output devices.
2. 10.11.1/Gigabyte Z97 Gaming-7/???BIOS/i7-4790K/GTX960 4GB
3. used [Guide] Add HDEF/Clover_v2
4.View attachment Hungry Ghost.ioreg
5. View attachment AppleHDA.kext.zip
6. don't think I have one. Is this my problem?

EDIT:
I GOT IT WORKING *happy dance*
Was able to use the AppleHDA-1150.pkg from Multibeast (7.5 I think), which made it all work. Thanks!

 

[Dexxter]

IOReg is different every time you boot. How useful is any previously attached IOReg?
No ALC1150 kext
config.plist is damaged.

Fix: download (View Raw) audio_cloverALC-110.command.zip, double click .command file.
Answer y to questions until
Use Audio ID: 0 (y/n): n
Audio IDs:
1 ...
2 ...
3 ...
Select Audio ID: 1

Reply with new files.

I can't answer to any of those questions, I enter my password and this is all I get.

(can't upload terminal output so here is screenshot)

http://prntscr.com/972ji3

 

[toleda]

I can't answer to any of those questions, I enter my password and this is all I get.

Audio is disabled; clean install is required.

 

[Dexxter]

I doubt I'll do that.

Thank you for your help.

 

[toleda]

had sound, try to fix "no sound after sleep" problem by install some other drivers, now I don't have sound at all.

doubt I'll do that.

"other drivers" = unrepairable.

 

[Dexxter]

Fixed it.

I used USB audio from my Logitech G430. I unplugged headphones and plugged in my speakers. Now it works without a problem. I also fixed the "no sound after sleep" problem with that as well.

I appreciate your help. Cheers.

 

[rahed]

Hi all I'm unable to set up my onboard sound chip which is realtek 887.

I'd only want it so I can use my microphone. Audio output is via USB.

I've tried many possibilities written in this topic but couldn't solve my problem.

So here are my answers to this test

realtek 887,
As far as my understanding goes, audio id is 1
I'm using clover. View attachment logs.ioreg

Post installation was done by multibEast but the El captain version as the yosemite one wouldn't work for me. (I'M USING YOSEMITE!!)


Thank you in advance