No Audio Devices - AppleHDA Realtek Audio

[toleda]

What next from here

Edit EFI/CLOVER/config.plist/Boot/dart=0 nvda_drv=1
Save, restart.

 

[toleda]

Can you point me to the next step?

See Quick Fix: 200/X299/300 Series Kaby Lake Audio, Onboard and/or HD 6x0 HDMI
Install one of the methods noted.

 

[JCMunsonII]

Edit EFI/CLOVER/config.plist/Boot/dart=0 nvda_drv=1
Save, restart.

The Nvidia card is not present in the system at the moment, just running off the HD630.

Are you wanting me to reinstall the Nvidia card post those changes and reboot as normal?

 

[toleda]

running off the HD630.

Normal boot with HD630, no USB installer?
If you changed anything, attach new files.

 

[JCMunsonII]

Normal boot with HD630, no USB installer?
If you changed anything, attach new files.

Only file changed was as per request - Config.plist to hard-code the web driver flag in place.

Re-inserted Nvidia card, re-connected monitor to Nvidia card, attempted restart.

Attempt to reboot normally failed.

Attempt to boot into Recovery fails (halts) with "kextd stall[2]: 'AppleACPICPU', then gIOScreenLockState 3...

 

[toleda]

Re-inserted Nvidia card, re-connected monitor to Nvidia card, attempted restart.

Too soon.
Boot with 630.
Open System Preferences/Nvidia Device Manager
Verify Driver Up to Date and Web Driver loaded
Reply with new files.

 

[JCMunsonII]

Removing the web driver flag, setting nv_disable=1, and attempting to boot into recovery produces the same result - kextd stall[0] (1, 2, etc.) in AppleACPICPU...

 

[toleda]

setting nv_disable=1, and attempting to boot into recovery produces the same result - kextd stall[0] (1, 2, etc.) in AppleACPICPU...

As expected.
Recovery mode is not available with the 1070 installed.

 

[JCMunsonII]

Too soon.
Boot with 630 (only)

As expected.
Recovery mode is not available with the 1070 installed.

Pulled 1070.

Attempted to boot into recovery - same crash as before (with page fault).

Attempted to boot normally. Screenshot attached of hang. Left with gIOScreenLockState 3...

 

[toleda]

Attempted to boot into recovery

Is HD630 enabled in the BIOS? If no, enable.
Boot with installer.
Edit config.plist/Graphics/ig-platform-id/0x59120000
0x59120003 has no display connectors.
Restart