No Audio Devices - AppleHDA Realtek Audio

[toleda]

HD audio already enabled in BIOS

Run the Mojave installer over the existing install. Reply with new files.

 

[toleda]

Removed the aforementioned kext, and attached new files.

IOReg show no audio codec, verify BIOS/.../HD Audio enabled

 

[brankokosteski]

Hi, I installed Sierra yesterday, everything works fine except the audio. I'm on Sierra 10.12.6, mb gigabyte z77x-ud5h, Bios ver 14, intel cpu 3770k, and gtx 760. I followed this guide https://www.tonymacx86.com/threads/...5lqzEL2ZsofrcooZJdK_uxGBsUhkn9yc#post-1606764 and also the "before you install audio..." guide, SIP is disabled, injected audio with clover configurator, and installed alc898 audio driver with multibeast. I'm sure I'm missing something, but I'm really a noob in this area, so help would be much appreciated.
Thanks

 

[osd]

Run the Mojave installer over the existing install. Reply with new files.

Hello,Toleda . I have reinstalled over existing install, result almost same. still can not find the CODEC.
Please see my screenshots on booting, Firstboot was booted from installation USB Disk, showed that appleHDA has been loaded and everything seemed OK. Secondboot was booted from SSD during the installation progress, showed appleHDA also loaded but seemed to have lost some. Thirdboot was booted from SSD for completing installation progress, showed appleHDA had gone away. and then every booting is same with the third one.
Please help, thanks very much.

 

[toleda]

injected audio with clover configurator, and installed alc898 audio driver with multibeast.

Troubleshooting files missing, see Post #1/Problem Reporting; attach all requested files

 

[xchose]

Hello everyone, I would like to ask kindly for help please. I have clasical issue "No output devices found" after reinstalling MacOS Sierra High 10.13.6 at my new SSD disk.

Description of audio problem
"No output devices found" after reinstalling MacOS Sierra High 10.13.6 at my new SSD disk.

OS X version/motherboard model/BIOS version/processor/graphics
10.13.6/GIGABYTE Z170-HD3P - Intel Z170 / F5 / Intel® Core™ i3-6100/ GeForce GTX 1050 Ti Windforce OC 4G

Procedure/Guide Used

MotherBoard: GIGABYTE Z170-HD3P - Intel Z170
Realtek® ALC887 codec > ALC887
Intel® Z170 Express > Serie 100
6 audio ports

So I applied ALC887/888b and 100/200/300 Series audio support in MultiBeast - High Sierra Edition. Rebooot and nothing. So I tried applied Latest Lilu and AppleALC by KextBeast. And Nothing.
I did check also my config.plst by clover configurator and I have injection audio at port 1 (actually try before more options).

Copy of IOReg - IOReg_v2.1/File/Save a Copy As…, verify file (Tools 2.

Installed S/L/E/AppleHDA.kext (10.11 and newer, search: show hidden files)
Lilu and AppleALC by KextBeast

1. 

Clover
config.plist and boot log
hd3p.zip


I have fresh install of SierraHigh. (did reinstall few times to get audio work already). BIOS should be setupped OK when boot from old disk I can use audio or HDMI audio. (NVIDIA GTX 1050 TI).

I definitely do something wrong or forget some step. Thank you so much for your help.

 

[toleda]

So I applied ALC887/888b and 100/200/300 Series audio support in MultiBeast - High Sierra Edition. Rebooot and nothing. So I tried applied Latest Lilu and AppleALC by KextBeast.

Either works, both never works. Install one, remove it, install another.
Attachment is useless
See Post #1/IV. Problem Reporting; attach all requested files

 

[xchose]

Either works, both never works. Install one, remove it, install another.
Attachment is useless
See Post #1/IV. Problem Reporting; attach all requested files

Thank you for your help. Anyway I am not sure:

Either works, both never works. Install one, remove it, install another. Do you mean Lilu and AppleALC KEXTS? If yes I tried

Choses-iMac:~ xchose$ ls -all /System/Library/Extensions/ | grep AppleALC
drwxr-xr-x@   3 root  wheel     96 Jun 21 23:21 AppleALC.kext
Choses-iMac:~ xchose$ ls -all /System/Library/Extensions/ | grep Lilu
Choses-iMac:~ xchose$

And otherwise with Lilu kext only. Anyway seems not be successful. I tried to add all reporting logs in zip. Hopefully will be helpful this time.

 

[steve3d]

hi toleda, I just upgraded my home computer to use gigabyte z390 aorus master, now after a series of applealc guides, still can not see my real audio device,

board: Gigabyte Z390 AORUS Master https://www.gigabyte.com/Motherboard/Z390-AORUS-MASTER-rev-10#kf
CPU: i9-9900k, disabled IGPU in bios
native AppleHDA.kext
no custom dsdt/ssdt

Because I'm still waiting new nvidia webdriver, so I'm stuck on the latest 10.13.6(17G4015)



Please help me with my audio, Thanks.

 

[xchose]

hi toleda, I just upgraded my home computer to use gigabyte z390 aorus master, now after a series of applealc guides, still can not see my real audio device,

board: Gigabyte Z390 AORUS Master https://www.gigabyte.com/Motherboard/Z390-AORUS-MASTER-rev-10#kf
CPU: i9-9900k, disabled IGPU in bios
native AppleHDA.kext
no custom dsdt/ssdt

Because I'm still waiting new nvidia webdriver, so I'm stuck on the latest 10.13.6(17G4015)

View attachment 372441

Please help me with my audio, Thanks.

Just For my info: I am trying to learn how this audio fix is actually working. Did you apply in Multibest only this two options ???
ALC1220-VB codec > ALC1220
Intel® Z390 > 100 / 200 / 300 / Series Audio support

No more kext applied ???