No Audio Devices - AppleHDA Realtek Audio

[jdleung]

Hi toleda,


Here is problem report.


1. Problem: No audio devices on system.

2. OSX 10.14.1 / GA-H61M-S2V-B3 / Bios Version: iSrc 1.20E / GeForce GTX 650 Ti

3. The audio ALC889 works well on a new install Mojave( AppleALC and Lilu installed), but no sound devices found after migrate data from High Sierra to Mojave via Migration assistant.

4,5,6,7,8,9. Attached



Thanks in advance

 

[toleda]

no sound devices found after migrate data from High Sierra to Mojave via Migration assistant

Did not remove High Sierra/MultiBeast/Audio.
See Mojave AppleHDA Audio/Post #1/Uninstall Previous Audio Methods

 

[osd29]

config.plist missing

Oops.. See attached file.

Boot log:
0:246 0:044 - [02]: AppleHDA (10.9-10.12-AppleHDA/Realtek ALC1150)
Selected wrong codec
Run MultiBeast 10.4/select ALC1220
Restart, reply with new files

Yeah ! It's seems to be ok. Thanks a lot.

Edit 2018-11-26 : I answered to fast. After some tests, no sound regardless of the selected output

 

[DjYXA]

Oops.. See attached file.


Yeah ! It's seems to be ok. Thanks a lot.

Edit 2018-11-26 : I answered to fast. After some tests, no sound regardless of the selected output

If the outputs not sounds, change layout id.

New version of ALC1220
See Post #1456; download AppleALC, install, restart, reply with new files

Sounds works!!
Heres my IOReg file.
P.d. Makes a lot of changes... IGPU runs now

 

[jdleung]

Did not remove High Sierra/MultiBeast/Audio.
See Mojave AppleHDA Audio/Post #1/Uninstall Previous Audio Methods

Sorry, still not work.

1. I uninstalled audio according to this instruction. Not work.
2. Again, I tried to make a MultiBeast post installation with/without Audio(AppleAlc, Alc889). Both not work

By the way, I don't understand "Did not remove High Sierra/MultiBeast/Audio". I'm running on Mojave, and High Sierra data are in Time Machine files. How can I "remove High Sierra/MultiBeast/Audio"?

 

[toleda]

no sound regardless of the selected output

Not helpful
See Post #1/Problem Reporting; attach all requested files

 

[toleda]

If the outputs not sounds, change layout id.

Bad advice, no sound is rarely a software problem. The Problem Reporting files identify the real problem.

 

[toleda]

Not work.

Useless, see Post #1/Problem Reporting; attach all requested files

Again, I tried to make a MultiBeast post installation with/without Audio(AppleAlc, Alc889). Both not work

Useless, see above

I don't understand "Did not remove High Sierra/MultiBeast/Audio". I'm running on Mojave, and High Sierra data are in Time Machine files. How can I "remove High Sierra/MultiBeast/Audio"?

It is not a kext problem. Clover is using MultiBeast/High Sierra audio setting for Mojave audio, fails every time. Time Machine does not see the EFI partition, red herring. Did not follow the instruction to remove High Sierra/MultiBeast/Audio.
Try again.

 

[jdleung]

Hi toleda,


Here is the new problem report.

1. Problem: No audio devices on system.
2. OSX 10.14.1 / GA-H61M-S2V-B3 / Bios Version: iSrc 1.20E / GeForce GTX 650 Ti
3. The audio ALC889 works well on a new install Mojave( AppleALC and Lilu installed), but no sound devices found after migrate data from High Sierra to Mojave via Migration assistant.
4. All requested files Attached

previous setting vs current setting:
1. MultBeast, Audio without selection of AppleALC and ALC889.
2. Clover, Audio layout set to no (I had also tried 1,2,11)
3. Clover, remove 3 AppleHDA config in KextsToPatch

I have done the following to uninstall previous audio:

1. cloverALC, remove:
   1. S/L/E/AppleHDA.kext/Contents/Resources/layout1.zml.zlib, layout2.zml.zlib, layout3.zml.zlib, Platforms.zml.zlib (4 files removed)
   2. config.plist/.../KextsToPatch/AppleHDA (3x) (3 AppleHDA settings removed)
   3. EFI/CLOVER/kexts/10.xx or other/realtekALC.kext (kext removed)
2. MultiBeast 9/10, remove:
   1. S/L/E/AppleHDA.kext/Contents/Resources/layout1.zml.zlib, layout2.zml.zlib, layout3.zml.zlib, Platforms.zml.zlib (4 files removed)
   2. config.plist/.../KextsToPatch/AppleHDA (3x)(3 AppleHDA settings removed)
   3. /L/E/realtekALC.kext(kext removed)

Do I need to do Anything else?

Thanks in advance

 

[toleda]

I have done the following to uninstall previous audio:

1. cloverALC, remove:
   1. S/L/E/AppleHDA.kext/Contents/Resources/layout1.zml.zlib, layout2.zml.zlib, layout3.zml.zlib, Platforms.zml.zlib (4 files removed)
   2. config.plist/.../KextsToPatch/AppleHDA (3x) (3 AppleHDA settings removed)
   3. EFI/CLOVER/kexts/10.xx or other/realtekALC.kext (kext removed)
2. MultiBeast 9/10, remove:
   1. S/L/E/AppleHDA.kext/Contents/Resources/layout1.zml.zlib, layout2.zml.zlib, layout3.zml.zlib, Platforms.zml.zlib (4 files removed)
   2. config.plist/.../KextsToPatch/AppleHDA (3x)(3 AppleHDA settings removed)
   3. /L/E/realtekALC.kext(kext removed)

Impossible; one or the other, never both
Remove HDAEnabler1.kext
Set config.plist/Devices/Audio/Inject/1
Restart, reply with new files