New USB Raise Port Limit Patch for High Sierra

[RehabMan]

Anyone know of a patch for 200 series boards?

The port limit patch is not specific to chipset.

 

[cretans]

Yes, working flawlesly, after patching and using kext, I just run the guide https://www.tonymacx86.com/threads/10-11-0-10-11-3-skylake-starter-guide.179221/#USB No#7 to build my port config again for High Sierra and everything works as it should.
Thanks again to ammulder for his comprehensive guide and to TonyMac for EVERYTHING.

 

[subte]

Working here, thanks!

 

[S3Atze]

No USB 3 device is working on my system under 10.13. Under 10.12 no problems at all.

I tried the USBInjectAll.kext, but no luck... This is frustrating me

Is there any easier way than creating an SSDT to get USB3 devices to work again?

 

[abhinasia]

No USB 3 device is working on my system under 10.13. Under 10.12 no problems at all.

I tried the USBInjectAll.kext, but no luck... This is frustrating me

Is there any easier way than creating an SSDT to get USB3 devices to work again?

Before me, also same. After reading guide, I come to know how it works. Not so frustrating.

 

[codyl1992]

Thanks! I couldn't figure it out. But I had an existing line in my Clover Configurator from a MultiBeast install, and I just changed the keys to what you had and it worked.

 

[Robvas]

Fantastic. Worked like a charm. Used Clover Configurator and restarted the machine. All good. Thanks!

Can you lead me through it. I use Clover Configurator as well, but little bit lost here. I also have lagging mouse issue, and, if I connect more than 1, external driver lags so much more.

edited,
Looks like my settings are same as posted in 1st post. But lagging mouse is still there.

Thx

 

[spescarus]

Anyone know of a patch for 200 series boards?

For 200 series on High Sierra the USB 3.0 and 3.1 are working without any patch. I have Gigabyte GA-Z270X-Gaming-K5 and all usb port are working without a patch

 

[flmmkr]

Quick note- High Sierra has a new Raise Port Limit Patch for USB 3 on Skylake/100 Series builds.

What about for other builds? I'm running an X79 system on a P9X79-E WS and can't get the USB3 ports on the motherboard to work. The USB3 card I have installed works though.

 

[Scrambler77]

Works well on Asus Z370 ROG STRIX. Thanks!