- Joined
- Jun 5, 2015
- Messages
- 36
- Motherboard
- Gigabyte Designaire X99 Ex
- CPU
- i7 5820k
- Graphics
- Nvidia GTX 1080ti
Hi,
Just installing a fresh copy of OSX Sierra following this guide -
https://www.tonymacx86.com/threads/...sierra-10-12-clover-guide-100-working.203769/
It's not made for my motherboard or GPU but I figured it was close enough to give it a shot.
Was chuffed when it booted first time after install (first time that ever happened for me). But unfortunately after following the guide I cannot get graphical output after boot.
verbose will boot past the text, then the monitor goes to sleep but the system looks good (Motherboard error code readout is AA)
I can boot with nv_disable=1 (actually only intermittently, boot will fail and restart sometimes, sometimes it boots. However it seems to boot to blank screen every time without this flag) So I am assuming it's the GPU.
I previously had a mostly stable version of Yosemite running on this setup, but got an SSD and as I had the odd random reboot I wanted to start again.
Monitor connected via DVI
System -
Asus X99-s Motherboard
GTX 980
i7 5820k
Configuration via above guide -
Multibeast:
Quick Start > UEFI Boot Mode
Drivers > Disk > Intel Generic AHCI Sata
Misc > NullCPUPowerManagement
Misc > VoodooTSCSync > VooDooTSCSync 6 Core
USB > 3rd Party USB 3.0
Network > Intel > AppleIntelE1000e
Clover:
Remove - OsXAptioFix2Drv.efi, VBoxHfs-64.efi, VBoxHfs-32.efi
Add - OsxAptioFix2Drv-free2000.efi
Add - VoodooHDA.kext
boot - dart=0, npci=0x2000
Clover configurator setup:
Drivers UEFI 64 Bit (Bottom Left Menu): EmuVariableUefi
Extra Drivers (Bottom Right Menu): HFSPlus, HFSPlus UEFI, OsxFatBinaryDrv UEFI
"Inject Kexts" - Yes
Nvidia Web - checkbox selected
Any help would be greatly appriciated.
Cheers,
Just installing a fresh copy of OSX Sierra following this guide -
https://www.tonymacx86.com/threads/...sierra-10-12-clover-guide-100-working.203769/
It's not made for my motherboard or GPU but I figured it was close enough to give it a shot.
Was chuffed when it booted first time after install (first time that ever happened for me). But unfortunately after following the guide I cannot get graphical output after boot.
verbose will boot past the text, then the monitor goes to sleep but the system looks good (Motherboard error code readout is AA)
I can boot with nv_disable=1 (actually only intermittently, boot will fail and restart sometimes, sometimes it boots. However it seems to boot to blank screen every time without this flag) So I am assuming it's the GPU.
I previously had a mostly stable version of Yosemite running on this setup, but got an SSD and as I had the odd random reboot I wanted to start again.
Monitor connected via DVI
System -
Asus X99-s Motherboard
GTX 980
i7 5820k
Configuration via above guide -
Multibeast:
Quick Start > UEFI Boot Mode
Drivers > Disk > Intel Generic AHCI Sata
Misc > NullCPUPowerManagement
Misc > VoodooTSCSync > VooDooTSCSync 6 Core
USB > 3rd Party USB 3.0
Network > Intel > AppleIntelE1000e
Clover:
Remove - OsXAptioFix2Drv.efi, VBoxHfs-64.efi, VBoxHfs-32.efi
Add - OsxAptioFix2Drv-free2000.efi
Add - VoodooHDA.kext
boot - dart=0, npci=0x2000
Clover configurator setup:
Drivers UEFI 64 Bit (Bottom Left Menu): EmuVariableUefi
Extra Drivers (Bottom Right Menu): HFSPlus, HFSPlus UEFI, OsxFatBinaryDrv UEFI
"Inject Kexts" - Yes
Nvidia Web - checkbox selected
Any help would be greatly appriciated.
Cheers,