New install for ASUS TUF Gaming Z790-Plus WiFi D4 w/i7-13700K CPU

[MrMinimizer]

I assume your USB map was done when connected like this?

Yes

 

[D-an-W]

Can I see the output of the command below from your system please just to confirm something...

sudo pmset -g

I have sleep working now after reading the post below, I also moved the Fenvi to it's own USB header (Left) and the Corsair HUB on the right one with the three Corsair devices attached (That alone didn't fix sleep though)...

Sleep with fans activated and LEDs on

Hi, I have an iMac19,2, Big Sur 11.5.2. I followed all the Dortania guide for opencore, I have OPENCORE 0.7.3. Also the steps for the sleep fix. But when it goes to sleep, the fans and LEDs continue to be on. I also noticed, on my return, that it went from off to fans on, always with the monitor...

www.tonymacx86.com

 

[MrMinimizer]

Can I see the output of the command below from your system please just to confirm something...

sudo pmset -g

I have sleep working now after reading the post below, I also moved the Fenvi to it's own USB header (Left) and the Corsair HUB on the right one with the three Corsair devices attached (That alone didn't fix sleep though)...

Sleep with fans activated and LEDs on

Hi, I have an iMac19,2, Big Sur 11.5.2. I followed all the Dortania guide for opencore, I have OPENCORE 0.7.3. Also the steps for the sleep fix. But when it goes to sleep, the fans and LEDs continue to be on. I also noticed, on my return, that it went from off to fans on, always with the monitor...

www.tonymacx86.com

Here is the output:

System-wide power settings:
Currently in use:
standby 1
Sleep On Power Button 1
womp 0
hibernatefile /var/vm/sleepimage
proximitywake 1
powernap 1
gpuswitch 2
networkoversleep 0
disksleep 10
standbydelayhigh 86400
sleep 1 (sleep prevented by sharingd)
hibernatemode 3
ttyskeepawake 1
displaysleep 20
tcpkeepalive 1
highstandbythreshold 50
standbydelaylow 86400

What where you checking - whats different?

 

[MrMinimizer]

Can I see the output of the command below from your system please just to confirm something...

sudo pmset -g

I have sleep working now after reading the post below, I also moved the Fenvi to it's own USB header (Left) and the Corsair HUB on the right one with the three Corsair devices attached (That alone didn't fix sleep though)...

Sleep with fans activated and LEDs on

Hi, I have an iMac19,2, Big Sur 11.5.2. I followed all the Dortania guide for opencore, I have OPENCORE 0.7.3. Also the steps for the sleep fix. But when it goes to sleep, the fans and LEDs continue to be on. I also noticed, on my return, that it went from off to fans on, always with the monitor...

www.tonymacx86.com

This is what Hackintool power shows as well...

 

[D-an-W]

I ran the commands in that post and the only thing I can see that changed was "hibernatemode"...

Before:

After:

After:

 

[D-an-W]

Yes

Does your USB look like this (Using your kext)...

 

[MrMinimizer]

Does your USB look like this (Using your kext)...
View attachment 564647

and...

here is mine!

 

[D-an-W]

I just noticed, sleep now works (Fully off) but only on and after the second try!

I have tried the ErP settings and still same, will have another go tomorrow.

 

[MrMinimizer]

I just noticed, sleep now works (Fully off) but only on and after the second try!

I have tried the ErP settings and still same, will have another go tomorrow.

Talk nice to her and she just might work out for you!

 

[D-an-W]

and...
View attachment 564649
here is mine!

Would you know if the two USB Hubs that show up are the NXZT adapter you have installed?