Contribute
Register

New Fan Control DSDT - for silent fan at higher temps!

Status
Not open for further replies.
Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
Don't have windows on HDD.
Thank anyway , I will stay with my fan ate 5000 rpm until I die. Ahahah
 
Don't have windows on HDD.
Thank anyway , I will stay with my fan ate 5000 rpm until I die. Ahahah

You should know your specs... At least the make/model of the laptop...
 
You should know your specs... At least the make/model of the laptop...

Sorry i put in my profile but somehow doesnt show:

Processador:
Intel(R) Core(TM) i5-2430M CPU @ 2.40 GHz 2.40 Ghz

Intel
Memória RAM:
6 GB DDR3 665.1 MHz
Placa Gráfica:
AMD Radeon HD 7470M 1GB DDR3
HDD/SSD:
750 GB
Placa de Som:
Realtek
Sistema Operativo:
W7 64 bits

My dsdt show fan0 equal to table shown here, hwmonitor working and showing 5000 rpm, bios uncheck fan always on, f.60 , dont know why fan stick with 5000 rpm only stopping bettwen bios and clover booting. I know its confusing...sorry

Editing again, using your files do patch dsdt i cant find fan experimental, if you can help in this camp ...
 
Last edited:
Sorry i put in my profile but somehow doesnt show:

Processador:
Intel(R) Core(TM) i5-2430M CPU @ 2.40 GHz 2.40 Ghz

Intel
Memória RAM:
6 GB DDR3 665.1 MHz
Placa Gráfica:
AMD Radeon HD 7470M 1GB DDR3
HDD/SSD:
750 GB
Placa de Som:
Realtek
Sistema Operativo:
W7 64 bits

My dsdt show fan0 equal to table shown here, hwmonitor working and showing 5000 rpm, bios uncheck fan always on, f.60 , dont know why fan stick with 5000 rpm only stopping bettwen bios and clover booting. I know its confusing...sorry

Editing again, using your files do patch dsdt i cant find fan experimental, if you can help in this camp ...

Please read carefully. You did not specify the make/model of the laptop...
 
Ok, really can't find experimental txt can someone help me
 
Already re-installed 3 times. I will attach my dsdt

You need to fill out your profile as requested in the guide...

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

--

There are different fan options as clearly documented in the guide. Select the one that meets your needs.

As for any other problems, read guide, post #1, "Problem Reporting".
 
You need to fill out your profile as requested in the guide...

--

There are different fan options as clearly documented in the guide. Select the one that meets your needs.

As for any other problems, read guide, post #1, "Problem Reporting".

Hi, RehabMan
First Id like to thank you for all you've done for the hackintosh community, i use some of your software to run my hackintosh PCs and it's great.
I have one question regarding FANs. Couldnt find anything about my current build so this topic is the closest so i thought to give it a shot.
HP EliteDesk 800 G1 (detail in signature) has some weird SuperIO which fails to load with fakesmc plugins so no go in that direction, unless there is a way to adopt it. Your approach is very interesting and it seems to fit a lot of manufacturers notebooks, not only HP. So I was wandering were to start looking if I want to monitor and control CPU fan in my desktop.
If you need any more info like DSDT or something i can post this later when I'm home.
 
Status
Not open for further replies.
Back
Top