New Clover Release v5.1 r5123/4/5/6/7 - Big Sur Support

[jpkee]

I went the OpenCore route. It's working now. Doesn't feel like it's running as good as it was previously. Not sure if I need to do some more tweaking

 

[tnttouchcom]

Same problem here when booting after installation it shows xxx times the following with no end:

AMFI: SIP is off, allowing core dump for pid xxx (logd)
Process[xxx] crashed: logd. Too many corpses being created.
localhost com.apple.xpc.launchd[1] (com.apple.logd.xxx) <Notice>: Service exited due to SIGILL I sent by exc handler[xxx]
localhost com.apple.xpc.launchd[1] (com.apple.logd) <Notice> Service only ran for 0 seconds. Pushing respawn out by 1 seconds
apfs_get_firmlink_target_vnode:2007:vnode_lookupat(Library) failed with error 2 --> this repeats 5 times

Any help??? :/

 

[RaMaTcH]

Same problem here when booting after installation it shows xxx times the following with no end:

AMFI: SIP is off, allowing core dump for pid xxx (logd)
Process[xxx] crashed: logd. Too many corpses being created.
localhost com.apple.xpc.launchd[1] (com.apple.logd.xxx) <Notice>: Service exited due to SIGILL I sent by exc handler[xxx]
localhost com.apple.xpc.launchd[1] (com.apple.logd) <Notice> Service only ran for 0 seconds. Pushing respawn out by 1 seconds
apfs_get_firmlink_target_vnode:2007:vnode_lookupat(Library) failed with error 2 --> this repeats 5 times

Any help??? :/View attachment 499579

Same problem with BigSur.
But no problem with Catalina 10.15.7.

NEC Express 5800/52Xa
i3 4330 Haswell
UEFI mode
Clover r5127

 

[RaMaTcH]

Solved!
Choose "Boot Mac OS X Install for (vol.) via preboot" again and again,
and "Boot Mac OS X from (vol.) via preboot" DOES work without SIGILL error.

"Boot macOS from (vol.)" doesn't work, but no problem.

 

[hirabayashi]

Clover r5127 latest
Upgrade from Catalina to Big Sur
Stuck at:
AMFI: SIP is off, allowing core dump for pld xx (logd)
Process[xx] crashed: logd. Too many corpses being created.

I did choose "Boot Mac OS X from..." after selected "Boot Mac OS X Install for..." twice

Please help!

 

[RaMaTcH]

Clover r5127 latest
Upgrade from Catalina to Big Sur
Stuck at:
AMFI: SIP is off, allowing core dump for pld xx (logd)
Process[xx] crashed: logd. Too many corpses being created.

I did choose "Boot Mac OS X from..." after selected "Boot Mac OS X Install for..." twice

Please help!

Choose "--- via preboot" entry.

Delete "preboot" from "Hide Volume" in config.plist.

 

[hirabayashi]

Choose "--- via preboot" entry.

Delete "preboot" from "Hide Volume" in config.plist.

wow, thanks so much. It works.
I finally installed Big Sur 11.01
The only thing remaining is App Store updates and download. Has anyone successfully update to 11.1 via App Store yet?

 

[anhvu-sg]

wow, thanks so much. It works.
I finally installed Big Sur 11.01
The only thing remaining is App Store updates and download. Has anyone successfully update to 11.1 via App Store yet?

same problem, I cannot update any apps from App Store (Currently I'm using Clover r5127)

-> % softwareupdate --all --install --force

Software Update Tool

Finding available software

Downloading macOS Big Sur 11.1 Update

Downloading: 100.00%

Failed to download & prepare update: Error Domain=SUMacControllerError Code=7722 "[SUMacControllerErrorPreflightPrerequisiteCheckFailed=7722] Failed to perform PreflightPrerequisite operation: com.apple.BuildInfo.preflight.error(Preflight):BIPreflightErrorTargetIsNotSnapshotBooted(6) | The volume can not be used because it is not snapshot booted.

-> Current device configuration requires an alternate installer to perform the update.: [com.apple.BuildInfo.preflight.error(Preflight):BIPreflightErrorTargetIsNotSnapshotBooted(6)|Unknown Error Indication|]" UserInfo={SUMacControllerErrorIndicationsSummary=|Unknown Error Indication|, SUMacControllerErrorIndicationsMask=8, SUMacControllerErrorIndicationsDescription=-> Current device configuration requires an alternate installer to perform the update., NSUnderlyingError=0x7fc2c1204b10 {Error Domain=com.apple.BuildInfo.preflight.error Code=6 "The volume can not be used because it is not snapshot booted." UserInfo={BIPreflightAlternateInstallerRecommended=true, NSLocalizedFailureReason=The volume can not be used because it is not snapshot booted., NSLocalizedDescription=The volume can not be used because it is not snapshot booted.}}, NSDebugDescription=[SUMacControllerErrorPreflightPrerequisiteCheckFailed=7722] Failed to perform PreflightPrerequisite operation: com.apple.BuildInfo.preflight.error(Preflight):BIPreflightErrorTargetIsNotSnapshotBooted(6) | The volume can not be used because it is not snapshot booted.

-> Current device configuration requires an alternate installer to perform the update.: [com.apple.BuildInfo.preflight.error(Preflight):BIPreflightErrorTargetIsNotSnapshotBooted(6)|Unknown Error Indication|], NSLocalizedDescription=Current device configuration and target is invalid for install in the current state. Please try again.}

-> % diskutil apfs list
APFS Container (1 found)
|
+-- Container disk1 6083D41F-50EC-49CE-9A46-D5D0F0F786E4
====================================================
APFS Container Reference: disk1
Size (Capacity Ceiling): 499763888128 B (499.8 GB)
Capacity In Use By Volumes: 287369986048 B (287.4 GB) (57.5% used)
Capacity Not Allocated: 212393902080 B (212.4 GB) (42.5% free)
|
+-< Physical Store disk0s2 6CD545EC-A52B-46BE-8645-6301C0316E6B
| -----------------------------------------------------------
| APFS Physical Store Disk: disk0s2
| Size: 499763888128 B (499.8 GB)
|
+-> Volume disk1s1 C2C91712-7177-32B7-878B-E443C3410A20
| ---------------------------------------------------
| APFS Volume Disk (Role): disk1s1 (Data)
| Name: OSX - Data (Case-insensitive)
| Mount Point: /System/Volumes/Data
| Capacity Consumed: 268705468416 B (268.7 GB)
| Sealed: No
| FileVault: No
|
+-> Volume disk1s2 AB7721A8-030D-4292-8EC4-0B5615632253
| ---------------------------------------------------
| APFS Volume Disk (Role): disk1s2 (Preboot)
| Name: Preboot (Case-insensitive)
| Mount Point: /System/Volumes/Preboot
| Capacity Consumed: 205836288 B (205.8 MB)
| Sealed: No
| FileVault: No
|
+-> Volume disk1s3 059CC43C-751B-409B-BEDD-873CE65E1484
| ---------------------------------------------------
| APFS Volume Disk (Role): disk1s3 (Recovery)
| Name: Recovery (Case-insensitive)
| Mount Point: Not Mounted
| Capacity Consumed: 652263424 B (652.3 MB)
| Sealed: No
| FileVault: No
|
+-> Volume disk1s4 096B0A92-A60C-4109-82F4-54FD56096518
| ---------------------------------------------------
| APFS Volume Disk (Role): disk1s4 (VM)
| Name: VM (Case-insensitive)
| Mount Point: /System/Volumes/VM
| Capacity Consumed: 2148552704 B (2.1 GB)
| Sealed: No
| FileVault: No
|
+-> Volume disk1s5 5F43A207-88A7-47B0-86BA-4A09C16151D7
---------------------------------------------------
APFS Volume Disk (Role): disk1s5 (System)
Name: OSX (Case-insensitive)
Mount Point: /
Capacity Consumed: 15493963776 B (15.5 GB)
Sealed: No
FileVault: No

Can anyone help?

 

[huis5]

Big Sur works perfect with 5127 Clover- config.plist added

 

[Nyssa]

wow, thanks so much. It works.
I finally installed Big Sur 11.01
The only thing remaining is App Store updates and download. Has anyone successfully update to 11.1 via App Store yet?

Same. For some reason App store downloads and updates are stuck.