- Joined
- Mar 25, 2012
- Messages
- 5
- Mac
- Classic Mac
- Mobile Phone
Here are my specs (they are all supported):
-Gigabyte GA-z68-x-ud3h-b3 motherboard
-Intel i5 2500k
-4 GB ram
-HD 3000 graphics
Here is my problem:
-I finished the installation using Unibeast then multibeast post-installation. At first when installing, I had to boot into safe mode just to install Lion. I later found out that -f would also get me into lion as well as setting "64-bit GraphicsEnabler=" to "no". I then read I needed to change bios settings, so I set my on board video ram to 300 and something (cant remember the exact number) I also checked to make sure my hard drives are in the right mode and not IDE...they are. So it appears my bios settings are correct. My system is a tonymacx86 build...so I also followed the Multibeast screenshot on the how to.
-I can boot into Lion, but I need either -f or "64-bit GraphicsEnabler=No"...which bumps my resolution down real low.
My question:
-How do I fix it?
**I attached a verbose file bellow.
-Gigabyte GA-z68-x-ud3h-b3 motherboard
-Intel i5 2500k
-4 GB ram
-HD 3000 graphics
Here is my problem:
-I finished the installation using Unibeast then multibeast post-installation. At first when installing, I had to boot into safe mode just to install Lion. I later found out that -f would also get me into lion as well as setting "64-bit GraphicsEnabler=" to "no". I then read I needed to change bios settings, so I set my on board video ram to 300 and something (cant remember the exact number) I also checked to make sure my hard drives are in the right mode and not IDE...they are. So it appears my bios settings are correct. My system is a tonymacx86 build...so I also followed the Multibeast screenshot on the how to.
-I can boot into Lion, but I need either -f or "64-bit GraphicsEnabler=No"...which bumps my resolution down real low.
My question:
-How do I fix it?
**I attached a verbose file bellow.