Need help with USB & BT on Catalina

[scarswhere]

Hello!
My configuration:

• Motherboard: ASUS P8H61-M LX2
• CPU: Intel core-i3 2110
• GPU: Gigabyte nVidia GT710 1GB (Kepler GK208)
• OS: Catalina 10.15.7 (iMac 13,3)
• Bootloader: Clover Legacy Mode
• Kexts: FakeSMC, Lilu, WhateverGreen, USBInjectAll, FakePCIID, FakePCIID_XHCIMux

I have succesfull installed macOS Catalina 10.15.7 in legacy mode. Everything is work, but my bluetooth not working... I bought usb bluetooth stick with CSR8510 A10 chip, which is natively supported on macOS Catalina. I read many forums looking for a problem with this device, but I did not find a solution.

My device is defined as CSR8510 A10 (Vendor ID: 0x0A12, Product ID: 0x0001). I think this is due to incorrect USB port allocation.

Spoiler: USB devices

Spoiler: LOGS

 kernel: (IOBluetoothFamily) [[0xE000]  OpCode 0x0C03 (Reset) from: kernel_task (0)  Synchronous  status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 1000 originalTimeout: 1000] Bluetooth warning: An HCI Req timeout occurred.
(IOBluetoothHostControllerUSBTransport) **** [IOBluetoothHostControllerUSBTransport][DeviceRequestCompleteHandler] -- Received 0xE00002D6 (kIOReturnTimeout) -- 0x3800 ****
 kernel: (IOUSBHostFamily) 000032.547657 CSR8510 A10@1d120000: IOUSBHostDevice::setConfigurationGated: compliance violation: failed to enable remote wake

How can I find the exact reason for this behavior and resolve? And, please, tell me how to properly configure the USB ports?
Thanks everyone!

 

[Feartech]

Hello!
My configuration:

• Motherboard: ASUS P8H61-M LX2
• CPU: Intel core-i3 2110
• GPU: Gigabyte nVidia GT710 1GB (Kepler GK208)
• OS: Catalina 10.15.7 (iMac 13,3)
• Bootloader: Clover Legacy Mode
• Kexts: FakeSMC, Lilu, WhateverGreen, USBInjectAll, FakePCIID, FakePCIID_XHCIMux

I have succesfull installed macOS Catalina 10.15.7 in legacy mode. Everything is work, but my bluetooth not working... I bought usb bluetooth stick with CSR8510 A10 chip, which is natively supported on macOS Catalina. I read many forums looking for a problem with this device, but I did not find a solution.

My device is defined as CSR8510 A10 (Vendor ID: 0x0A12, Product ID: 0x0001). I think this is due to incorrect USB port allocation.

Spoiler: USB devices

View attachment 540015View attachment 540016
View attachment 540017

Spoiler: LOGS

 kernel: (IOBluetoothFamily) [[0xE000]  OpCode 0x0C03 (Reset) from: kernel_task (0)  Synchronous  status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 1000 originalTimeout: 1000] Bluetooth warning: An HCI Req timeout occurred.
(IOBluetoothHostControllerUSBTransport) **** [IOBluetoothHostControllerUSBTransport][DeviceRequestCompleteHandler] -- Received 0xE00002D6 (kIOReturnTimeout) -- 0x3800 ****
 kernel: (IOUSBHostFamily) 000032.547657 CSR8510 A10@1d120000: IOUSBHostDevice::setConfigurationGated: compliance violation: failed to enable remote wake

How can I find the exact reason for this behavior and resolve? And, please, tell me how to properly configure the USB ports?
Thanks everyone!

The New Beginner's Guide to USB Port Configuration

Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...

www.tonymacx86.com

 

[scarswhere]

The New Beginner's Guide to USB Port Configuration

Important Update: June 2023 From Big Sur 11.3 on the built-in OpenCore XhciPortLimit quirk no-longer worked as described. This became a known "bug", though in reality it was Apple changing their internal code, making a simple "peek and poke" to keep it operating, a difficult task. However, with...

www.tonymacx86.com

I did everything according to the instructions, my usb ports started working correctly. But my USB BT dongle no work... IOBluetoothFamily kext has identify my USB Dongle... How resolve this problem?

Spoiler: Image