Contribute
Register

Need help with USB & BT on Catalina

Joined
Dec 6, 2021
Messages
2
Motherboard
Asus P8H61-M LX2
CPU
i3-2110
Graphics
GT 710
Mac
  1. iMac
Mobile Phone
  1. Android
Hello!
My configuration:
  • Motherboard: ASUS P8H61-M LX2
  • CPU: Intel core-i3 2110
  • GPU: Gigabyte nVidia GT710 1GB (Kepler GK208)
  • OS: Catalina 10.15.7 (iMac 13,3)
  • Bootloader: Clover Legacy Mode
  • Kexts: FakeSMC, Lilu, WhateverGreen, USBInjectAll, FakePCIID, FakePCIID_XHCIMux
I have succesfull installed macOS Catalina 10.15.7 in legacy mode. Everything is work, but my bluetooth not working... I bought usb bluetooth stick with CSR8510 A10 chip, which is natively supported on macOS Catalina. I read many forums looking for a problem with this device, but I did not find a solution.

My device is defined as CSR8510 A10 (Vendor ID: 0x0A12, Product ID: 0x0001). I think this is due to incorrect USB port allocation.
1642722411940.png
1642722661043.png

1642722702206.png
Code:
 kernel: (IOBluetoothFamily) [[0xE000]  OpCode 0x0C03 (Reset) from: kernel_task (0)  Synchronous  status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 1000 originalTimeout: 1000] Bluetooth warning: An HCI Req timeout occurred.
(IOBluetoothHostControllerUSBTransport) **** [IOBluetoothHostControllerUSBTransport][DeviceRequestCompleteHandler] -- Received 0xE00002D6 (kIOReturnTimeout) -- 0x3800 ****
 kernel: (IOUSBHostFamily) 000032.547657 CSR8510 A10@1d120000: IOUSBHostDevice::setConfigurationGated: compliance violation: failed to enable remote wake

How can I find the exact reason for this behavior and resolve? And, please, tell me how to properly configure the USB ports?
Thanks everyone!
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
26,036
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
Hello!
My configuration:
  • Motherboard: ASUS P8H61-M LX2
  • CPU: Intel core-i3 2110
  • GPU: Gigabyte nVidia GT710 1GB (Kepler GK208)
  • OS: Catalina 10.15.7 (iMac 13,3)
  • Bootloader: Clover Legacy Mode
  • Kexts: FakeSMC, Lilu, WhateverGreen, USBInjectAll, FakePCIID, FakePCIID_XHCIMux
I have succesfull installed macOS Catalina 10.15.7 in legacy mode. Everything is work, but my bluetooth not working... I bought usb bluetooth stick with CSR8510 A10 chip, which is natively supported on macOS Catalina. I read many forums looking for a problem with this device, but I did not find a solution.

My device is defined as CSR8510 A10 (Vendor ID: 0x0A12, Product ID: 0x0001). I think this is due to incorrect USB port allocation.
Code:
 kernel: (IOBluetoothFamily) [[0xE000]  OpCode 0x0C03 (Reset) from: kernel_task (0)  Synchronous  status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 1000 originalTimeout: 1000] Bluetooth warning: An HCI Req timeout occurred.
(IOBluetoothHostControllerUSBTransport) **** [IOBluetoothHostControllerUSBTransport][DeviceRequestCompleteHandler] -- Received 0xE00002D6 (kIOReturnTimeout) -- 0x3800 ****
 kernel: (IOUSBHostFamily) 000032.547657 CSR8510 A10@1d120000: IOUSBHostDevice::setConfigurationGated: compliance violation: failed to enable remote wake

How can I find the exact reason for this behavior and resolve? And, please, tell me how to properly configure the USB ports?
Thanks everyone!
 
Joined
Dec 6, 2021
Messages
2
Motherboard
Asus P8H61-M LX2
CPU
i3-2110
Graphics
GT 710
Mac
  1. iMac
Mobile Phone
  1. Android
I did everything according to the instructions, my usb ports started working correctly. But my USB BT dongle no work... IOBluetoothFamily kext has identify my USB Dongle... How resolve this problem?
1642728484638.png
 
Top