Need Help To Enable HDMI Audio HD4000 DQ77KB Maveicks.

[rick26]

Okay..

Didn't come so far.. but here is my native DSDT..

I got stuck at part 11..

Can you patch it for me?

Rick

 

[toleda]

Can you patch it for me?

Your job.

 

[rick26]

Well okay,,

Tried some more today and first patched with Clean compile and the I compiled it and then did the the HD4000 for 7 series motherboards patch.
then compiled again and again no errors or anything then saved it as .AML on desktop and installed it in the extra folder and did repair permissions and a cache rebuild an restart but nothing happend there was no audio at all.

 

[toleda]

nothing happend there was no audio at all.

No surprise.
Download IOReg:
audio_ALCInjection/IORegistryExplorer_v2.1.zip at master · toleda/audio_ALCInjection
IOReg/File/Save a Copy As…, attach zip.

 

[rick26]

Okay.

Here my IOreg copy.

Rick,

 

[toleda]

Here my IOreg copy.

No audio?? 892 onboard audio is working. Regarding HD4000 HDMI audio, what happen to the "Capri06 binary patch from SJ_UnderWater" from Post #1?

 

[rick26]

Okay that was the wrong copy..

here is the right one.

the DSDT is installed the and I did a cache rebuild and repair permissions after restart abd after restart no audio.

Didn't run the Capri06 patch jet.

 

[toleda]

Didn't run the Capri06 patch jet.

The dsdt was installed properly in the earlier IOReg (Post #15). The dsdt is not installed in the latest IOReg. Install the edited dsdt.aml to Extra. Apply the Capri06 patch. Reply with edited dsdt and IOReg.

 

[rick26]

Okay,

I have audio now, the edited DSDT is installed and I run the Capri06 patch and did a restart but nothing changes after that.

My files:

Rick,

 

[toleda]

have audio now, the edited DSDT is installed and I run the Capri06 patch and did a restart but nothing changes after that.

1. Download DPCIManager | Free System Administration software downloads at SourceForge.net
2. DPCIManager/Rebuild Cache
3. Restart