Contribute
Register

Need help configuring iGPU Framebuffer

Joined
Sep 15, 2018
Messages
2
Motherboard
H370
CPU
I7-8700
Graphics
GTX 1070TI
hi guys...
I did everything in the guides to make my uhd 630 graphic acceleration work in macOS Mojave
Tried FakePCIID_Intel_HD_Graphics.kext and changed my smbios to Mac mini 8,1, I think it worked to turn on the acceleration, I saw it in the
verbose mode that the Mac was reading the uhd memory, but after it booted the screen was black with no signal
without the acceleration enabled, the system will lag which is frustrating, it shows I only have 7mb of VRAM in the about section in the OS
I just gave up I don't know what to do

I don't have dedicated GPU now
and also I configured BIOS to:

Primary display -> CPU
multi-monitor -> disabled
allocated memory -> 256mb

here is my pc specification:
intel core i7-8700
Asus ROG Strix H370-F
16GB 2x8 DDR4 2666MHz

I attached the EFI Folder

any help will be appreciated, thanks

thanks
Image 11-24-19 at 8.01 PM.jpg
 

Attachments

Joined
Nov 5, 2019
Messages
6
Motherboard
Dell Optiplex 7060 MFF
CPU
i7-8700T / Q370
Graphics
UHD 630
Mac
iMac, MacBook Air
Mobile Phone
Android
hi,

I don't have the same motherboard (I have a Dell), but do have the UHD630.

What worked for me was to use the latest WhateverGreen version and then launch Hackintool to make a patch. Be sure you check the relevant checkmarks for video acceleration and it will give you the correct Properties for your Clover config.plist.
 
Top