- Joined
- Jun 9, 2013
- Messages
- 10,289
- Motherboard
- ASUS ROG STRIX Z390-F GAMING
- CPU
- i5 8500
- Graphics
- RTX 570
- Mac
- Mobile Phone
I've tried and here the strange result:
Is CsrActiveConfig set to 0x67? If so try OsxAptioFixDrv2.
I've tried and here the strange result:
Is CsrActiveConfig set to 0x67? If so try OsxAptioFixDrv2.
Thank you for the answer... Eventually I've formatted everything and installed macOS on a SSD disk, it seems that it was very tricky to get NVME boot, anyway now the system is pretty stable and I can also access to my NVME disk.
Hi everyone.
I have just built my first hackintosh and i still have a problem to slove.
I hope someone can help me.
My problem is that the system reboot again shortly after power off (after 3 seconds).
My setup is as follows:
Gigabyte GA-Z170X-DESIGNARE Mainboard (with BIOS version update F22)
Intel Core i7-6700K Prozessor
Gigabyte GeForce GTX 980 Ti
Crucial Ballistix Sport LT (32GB)
macOS Sierra Version 10.12.5
NVIDEA Web Driver
Clover V.2.4 EFI bootloader
I'm having the same issue.
I clicked "FixShutdown004" in clover config but no luck.
When I click shutdown the computer and fans keep running, goes to black screen then kicks into reboot.
I disabled "Wake for Network Access" in Mac System Settings and also in the BIOS of my GA-H170N-WIFI motherboard. I still have this problem. Have to flip the power-off switch on my power strip to disconnect it while it's still off (and prevent the auto reboot).I installed 10.13.2 yesterday and for the first time since I had a hackintosh I experienced this problem. Basically my computer stops for a few seconds and then starts again.
FixShutdown didn't work for me. I disabled wake on lan function and now shutdown works for me.
The Rules said:Profiles need to contain at least your primary system to assist others with helping you.
The Rules said:Profiles need to contain at least your primary system to assist others with helping you.