Contribute
Register

<< Solved >> My Friends I Need Help!I'm going crazy, install the Mojave always REBOOT!

Status
Not open for further replies.
Joined
May 14, 2019
Messages
8
Motherboard
MSI Z370
CPU
i7-8700K
Graphics
RX 560
Reference: https://www.tonymacx86.com/threads/...ojave-on-any-supported-intel-based-pc.259381/ Guide. After the first phase of installation (formatting the disk, installing Mojave), I came to the second stage, where the location of the figure was restarted repeatedly.

How to display the log here using the graphical installation interface that comes with the -v parameter? what should I do?

407129


==================================
The issue is:SAMSUNG 250GB 970 EVO Plus'firmware!!!

Solution:link
==================================
 
Last edited:
It's normal for that to happen 3 or more times. Keep selecting "Boot macOS Install from Mojave" at the Clover boot menu until it finishes.
 
It's normal for that to happen 3 or more times. Keep selecting "Boot macOS Install from Mojave" at the Clover boot menu until it finishes.

I tried it. After about 3 reboots, Clover can see a new Recovery partition, and then the new installation interface, reboot in the picture, still after ten times.
407151
 
I have a brand new installation, it has been 2 hours, I have no way, reboot reboot numerous times. There have been a few changes in the reboot many times before, now it does not advance, repeated in the last two pictures reboot

I uploaded the photos of the key screens. I omitted the reboot screens many times during the period. They are similar.

407158
407159
407160
407161
407162
407163
407164
407165


Sorry for my friend, about the language expression, I use the Goole translation, this sentence is also.
 
I let Clover boot from the last boot disk, one night passed, and the result is unchanged. at "about 12 minutes remaining" reboot.

MSI Z370M Gaming Pro AC + 8700K + SAMSUNG 250GB 970 EVO Plus*2 + G.SKILL 8G*2 DDR4 3200 + RX560.

I think the problem is on the motherboard? Even if the RX560 graphics card is unplugged, the UHD-630 is repeatedly reboot.
 

Attachments

  • EFI.zip
    3.9 MB · Views: 70
I let Clover boot from the last boot disk, one night passed, and the result is unchanged. at "about 12 minutes remaining" reboot.

MSI Z370M Gaming Pro AC + 8700K + SAMSUNG 250GB 970 EVO Plus*2 + G.SKILL 8G*2 DDR4 3200 + RX560.

I think the problem is on the motherboard? Even if the RX560 graphics card is unplugged, the UHD-630 is repeatedly reboot.
  • In your EFI_CLOVER_drivers64UEFI try REMOVING OsxAptioFix2Drv-free2000.efi and ADDING AppleImageLoade-64.EFI and AppleMemoryFix-64.EFI
  • With that edited EFI try again.
  • ALWAYS boot in Verbose till successful and ALWAYS upload Verbose screen shot to get help.
 

Attachments

  • drivers64UEFI.png
    drivers64UEFI.png
    27.5 KB · Views: 53
  • In your EFI_CLOVER_drivers64UEFI try REMOVING OsxAptioFix2Drv-free2000.efi and ADDING AppleImageLoade-64.EFI and AppleMemoryFix-64.EFI
  • With that edited EFI try again.
  • ALWAYS boot in Verbose till successful and ALWAYS upload Verbose screen shot to get help.

Thank you for your reply, now the problem may be solved, I am going to have a clean installation.
OsxAptioFix2Drv-free2000.efi is used because the MSI motherboard often appears Error allocating pages at alloc type 2, and this problem has not occurred after the replacement.

Reboot issues should be related to SAMSUNG 250GB 970 EVO Plus firmware
I stumbled upon this post:
https://www.tonymacx86.com/threads/...ert-no-they-dont.270757/page-10 #post-1959028.

This is a very unfortunate problem that has bothered me for a week and I hate to reboot.
 
Status
Not open for further replies.
Back
Top