Contribute
Register

My 2nd Mac Pro Case Mods, Z490 Vision D with 10900K

Status
Not open for further replies.
Joined
Jul 14, 2020
Messages
34
Motherboard
Z590 Vision D
CPU
i7 11700K
Graphics
RX 6800 XT
Mac
  1. Mac Pro
Mobile Phone
  1. Android
218311414_10225881794734607_4907835569188920817_n.jpg

220267119_10225881794054590_5970722107728682441_n.jpg


Making of video :

CPU: Intel i9 10900K 3.8GHz OC to 5.1GHz
GPU: Gigabyte RX5700XT Gaming OC 8G
RAM: Kingston HYPERX ARGB DDR4 3600 64GB
Motherboard : Gigabyte Z490 VISION D
Audio Codec: ALC1220VB
LAN : On Borad Intel® 2.5GbE, 1GbE
BIOS Version : F20a
SSD : WD SN750 M.2 2T (MacOS), WD SN750 M.2 1T (Windows10)
HP EX950 M.2 2T (Mac Storage)
Wifi/BT Card: Apple BCM94360CDP
PSU : Seasonic GN750W
Display : 27" 5K Retina (DIY)
Keyboard : Keychron K1 fullsize keyboard
Mouse : Apple magic 2 trackpad
Speaker : iMac Pro internal speaker
CPU COOLER : Be Quite 280MM Pure Loop 2 AIO
SYSTEM FAN : Arctic argb p12 120mm x 3
OPTICAL DRIVE : Hitachi UHD BLU-RAY DRIVE

System : OC072, Big Sur 11.5.2

Working :
All Wifi running smooth, BT, Airdrop, 2.5GbE lan working fine.
USB, type C, HD audio front and rear both working.

Not Working :
Thunderbolt not support hotplug, not flash chips yet.

Hi everyone, this is the 2nd build of Hackintosh, at the beggining I brought 3 mac pro case, 2 is A1186, 1 is G5.
This is the second stage of build, 2 down, 1 more to go!
Follow the guide OC, step by step and try & error, fixing the kext and driver problem. And appreciated Moderator CaseySJ,
He help a lot of Hackintosh builder, make it easy way, Thanks again!!!

This build like to "back to old school" look, I happy with it. quite enjoy this build, Thank you guys!
 
Last edited:
so cool! the same with you,can you share your EFI files? thx!
 
Last edited:
Hi everyone, this is the 2nd build of Hackintosh, at the beggining I brought 3 mac pro case, 2 is A1186, 1 is G5.
This is the second stage of build, 2 down, 1 more to go!

@joe6187,

Super slick and professional build presented in a very well shot video ... great work.

Cheers Jay
 
Stunning stuff!

Hope you don’t mind me asking, but how did you do the front panel mod?
I’ve completed most of my case mod but the front panel is the last bit & I’m at a loss how to mod it without things looking terrible.

Yours is EXACTLY how I’d want mine to look!

Well done
 
Stunning stuff!

Hope you don’t mind me asking, but how did you do the front panel mod?
I’ve completed most of my case mod but the front panel is the last bit & I’m at a loss how to mod it without things looking terrible.

Yours is EXACTLY how I’d want mine to look!

Dont take video about the front panel, u can check it out, only reuse the 3.5mm jack and power button.
Both USB use zip tie and gule stable, of couse drill 2 big hole on the broad, Type C use bolt & nuts fix the place.
A bit rough, but all work :p My little advice is use flat cable of both connector. that will easy manage the cables.
jc.jpg
 
This is absolutely mindblowing. It looks so cool with the rainbow Apple logo. Still the most beautiful Mac or even PC case every produced. Thanks for sharing
 
Status
Not open for further replies.
Back
Top