Contribute
Register

multybeast 4.3.2 no boot on 10.7.3 p6x58d premium x980 3.33

Status
Not open for further replies.
Joined
Jun 16, 2011
Messages
36
Motherboard
ASUS P6X58D Premium
CPU
i7-980X
Graphics
GTX 950
Mac
  1. Mac Pro
Classic Mac
  1. iMac
Mobile Phone
  1. iOS
hi this is how i got every thing installed

use rboot install os x 10.7 from hdd

after i installed it i upgraded to 10.7.3 then i ran multybeast easyboot and i got noboot
back yo restore partition

ran it with a custome dsdt from my board and i got a no go

i installed chameleon lates and got the same problem
then use chimera and the same problem there

one thing i realize was that multybeast configures my hacintoush as a mac pro 4,1

i get a panic cpu 6 caller 0xfffffff8000002a7

i also get this mesege9 error-reporting blancks
strange thing is that my cpu x980 3.33 ghz
installes fine with rboot but when i install multybeast i get a panic and i cant boot
any ideas
how to fix it
 
cajunsniper said:
hi this is how i got every thing installed

use rboot install os x 10.7 from hdd

after i installed it i upgraded to 10.7.3 then i ran multybeast easyboot and i got noboot
back yo restore partition

ran it with a custome dsdt from my board and i got a no go

i installed chameleon lates and got the same problem
then use chimera and the same problem there

one thing i realize was that multybeast configures my hacintoush as a mac pro 4,1

i get a panic cpu 6 caller 0xfffffff8000002a7

i also get this mesege9 error-reporting blancks
strange thing is that my cpu x980 3.33 ghz
installes fine with rboot but when i install multybeast i get a panic and i cant boot
any ideas
how to fix it

Did you check Graphics Driver or Boot Option ?
you have to Install Graphics Drivers or For ATI you have to Select GraphicsEnbler=No in Boot option
 
I CANT FIND THE PLIST FILE BEFORE IT WAS IN EXTRA
NOW ITS GONE
i have a ti card but its no detected i already pass the cpu problem i set it up as an iMac 11,1 the question is what the best system setup for intel pentium 980x 3.33 ghz

i have 10.7.3 i don't know where the ignition plist to set the graphics enable is?
 
i get panic attack after installing and booting fine with a setup of an imac 11,1
i dont get it whats the right configuration for a 980x 3.33 ghz prossesor
 
Status
Not open for further replies.
Back
Top