MultiBeast error while Setting Up Mojave

[Ribeirsg]

Hello there Mojave user's,

I would like to request some assistance with the current hackintosh that I'm building:

My setup is this one:

MB: GA-B75M-D3H
CPU: i7-3770K
Ram: 16GB (4x4GB) DDR3 1600MHZ
Graphics: MSI - GeForce GTX 960 4GB
Storage: 128 SSD + 320GB HDD 3,5 7400RPM ( Converted to Fusion Drive )

I'm currently trying to run macOS Mojave and while following the setup guide on the website, I got stuck in the Multibeast Part. After selecting the following options ( I believe that they are the correct ones )

macOS version: macOS 10.14.2 (18C54)

MultiBeast version: 11.0.1-1

MultiBeast choices:

Quick Start > Clover UEFI Boot Mode

Drivers > Audio > AppleALC
Drivers > Audio > Optional 3 Port (5.1) Audio
Drivers > Disk > Intel Generic AHCI SATA
Drivers > Misc > FakeSMC
Drivers > Misc > FakeSMC Plugins
Drivers > Misc > FakeSMC HWMonitor Application
Drivers > Network > Realtek > RealtekRTL8111 v2.2.2
Drivers > USB > 3rd Party USB 3.0
Drivers > USB > 7/8/9 Series USB Support
Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM
Customize > System Definitions > iMac > iMac 13,2
Customize > Graphics > NVIDIA Web Drivers Boot Flag

Destination files system type: APFS

MultiBeast.log:

12/29/18 05:29:51 - Starting MultiBeast 11.0.1-1
12/29/18 05:46:27 - Installing 'Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM'
12/29/18 05:46:33 - Installing 'BootVolume'
12/29/18 05:46:33 - Mounting EFI at destination 'Macintosh HD'
12/29/18 05:46:33 - Mount of EFI partition failed. Exiting.
12/29/18 06:06:05 - Starting MultiBeast 11.0.1-1
12/29/18 06:07:13 - Installing 'Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM'
12/29/18 06:07:20 - Installing 'BootVolume'
12/29/18 06:07:20 - Mounting EFI at destination 'Macintosh HD'
12/29/18 06:07:20 - Mount of EFI partition failed. Exiting.

install.log:

Attached...

error message:

"The installation failed
The Installer encountered an error that caused the software to fail.
Check the MultiBeast.log Install log for more Details"

Does any one had the same error, while installing Mojave?

it would be really helpful if someone could give me some guidance!

Thanks a million!

King Regards,
Ribeirsg

 

[trs96]

Remove the 960 gfx card and use the integrated HD4000 graphics.
Also remove Graphics > NVIDIA Web Drivers Boot Flag
There are no Nvidia Mojave drivers as of today.

 

[Ribeirsg]

There is no other way without removing the 960? and if use high Sierra? will it work with my card?

 

[trs96]

There is no other way without removing the 960? and if use high Sierra? will it work with my card?

You can use the 960 with H.Sierra, not with Mojave.

 

[nikb47]

This happened to me when I tried to run MultiBeast with the OS EFI partition mounted. Ejected the EFI and everything worked normally. Just throwing it out there. Good luck!