Contribute
Register

MultiBeast 9.0.1 fails to install

Status
Not open for further replies.
Joined
Jul 27, 2012
Messages
31
Motherboard
Gigabyte Z170 Gaming 3-EU
CPU
Intel Core i7-6700 3.4Ghz
Graphics
Nvidia GeForce GTX 1060
Mobile Phone
  1. Android
I have got an i7 6700 and I am using the iGPU (Intel HD 530) since the GTX 1060 I have got is not yet supported. My Mobo is the Gigabyte Z170 gaming 3 EU

I have created a LogicalVolume based on my 240GB SanDisk Ultra II SSD and a WD Blue 1TB HDD

Everything installed without any problem, I did not even to set any particular options in clover to boot the installer.

I am able to boot from the USB installer to my LogicalVolume.

I tried to run MultiBeast with the following things enabled:

Quick Start > UEFI Boot Mode
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Misc > FakeSMC v6.21-311-g2958f55.1723
Bootloaders > Clover v2.3k r3766
UEFI Boot Mode Customize > System Definitions > iMac > iMac 14,2
Drivers > Graphics > Intel HD 530

But every time I was getting this error: (please see attached picture)


This is the MultiBeast.log

11/11/16 04:27:38 - Starting MultiBeast 9.0.1-20161010
11/11/16 04:30:04 - Starting MultiBeast 9.0.1-20161010
11/11/16 04:30:27 - Installing 'Bootloaders > Clover v2.3k r3766 UEFI Boot Mode'
11/11/16 04:30:31 - Installing 'BootVolume'
11/11/16 04:30:31 - Mounting EFI
11/11/16 04:30:31 - Installing 'Drivers > Audio > Realtek ALCxxx > ALC1150'
11/11/16 04:30:48 - Install of '/private/var/folders/cw/p66602r17ljccrjp1wnnskg80000gn/T/AppTranslocation/D1EE8FD8-AEB2-4DCB-9210-2D0F9E23CF1A/d/MultiBeast.app/Contents/Resources/Clover-ALC1150.pkg' failed.
'installer: Package name is Clover ALC1150
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.

I finally figured out that both the ALC1150 and the Intel HD 530 was causing the installation failure. so I tried to not install them at first and just install Clover UEFI Boot Mode to my LogicalVolume. The installation was successful but I cannot boot from the LogicalVolume because the UEFI BIOS does not see it and I am forced to boot from the Installer.

How can I fix, first, the LogicalVolume boot and then the drivers I need for audio and graphics to work?
 

Attachments

  • Screen Shot 2016-11-11 at 04.31.01.png
    Screen Shot 2016-11-11 at 04.31.01.png
    64.7 KB · Views: 301
Joined
Jul 16, 2016
Messages
22
Motherboard
ga z170-wind-cf
CPU
6700k
Graphics
gtx 1070 (ga)
my I7-6700k and gtx-1070 install and start up normally, HD 530 not work either
 
Joined
Sep 24, 2012
Messages
3
Motherboard
GA-Z170N-Wifi
CPU
6700K
Graphics
onboard Intel 530
Comiserating here. Gigabyte Z170N-Wifi, Bios F20, 6700K.

All settings and methods according to install guide, completed Sierra Install, Found Multibeast could not complete with either Realtek 1150 audio or Intel 530 selected. Completed the Multibeast vanilla UEFI install but the completed SSD will not boot unless I first boot from the USB key.

Something's up here...
 

P1LGRIM

Moderator
Joined
Mar 2, 2012
Messages
25,492
Motherboard
Lenovo ThinkStation p700
CPU
2x E5-2620 V3
Graphics
RX 560
Mac
  1. MacBook Pro
  2. Mac mini
Classic Mac
  1. Power Mac
Mobile Phone
  1. iOS
Comiserating here. Gigabyte Z170N-Wifi, Bios F20, 6700K.

All settings and methods according to install guide, completed Sierra Install, Found Multibeast could not complete with either Realtek 1150 audio or Intel 530 selected. Completed the Multibeast vanilla UEFI install but the completed SSD will not boot unless I first boot from the USB key.

Something's up here...
If you have a problem with MultiBeast then you should post in the MultiBeast forum, having first read the MultiBeast Failure Reporting instructions.
 
Status
Not open for further replies.
Top