- Joined
- Mar 21, 2013
- Messages
- 3
- Motherboard
- Yosemite 10.10.2 on Gigabyte GA-Z97M-D3H
- CPU
- i7-4790K
- Graphics
- EVGA GT 740 sc
- Mac
- Classic Mac
- Mobile Phone
Hello,
I am having trouble booting Mavericks on a MSI motherboard MSI Z68MA-G45(B3) with latest BIOS. Maybe this is a simple issue but I have tried to use different Multi Beast Settings, but failed.
The process halted at these lines:
The booting took around 3 minutes, or more.
Here is my Hardware List:
My Multibeast Config is
And here is my BIOS Setting
Can anyone help?
Thanks!
I am having trouble booting Mavericks on a MSI motherboard MSI Z68MA-G45(B3) with latest BIOS. Maybe this is a simple issue but I have tried to use different Multi Beast Settings, but failed.
The process halted at these lines:
Code:
[FONT=Helvetica Neue]Waiting for DSMOS...
Sound assertion in AppleHDAEngine at line 581
[/FONT]Here is my Hardware List:
- MSI z68MA-G45(B3)
- i7-2600 CPU @ 3.40GHz
- M-Audio Audiophile192
- NVIDIA GeForce210
- USB 3.0 rear I/O ports by NEC® D720200
- Ethernet by Realtek 8111E
My Multibeast Config is
Code:
[FONT=Helvetica Neue]Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > Without DSDT > ALC892 Drivers > Audio > Realtek ALCxxx > Without DSDT > HDAEnabler Drivers > Disk > TRIM Enabler > 10.9.0 TRIM Patch
Drivers > Misc > EvOreboot
Drivers > Misc > FakeSMC v5.3.820
Drivers > Misc > FakeSMC v5.3.820 Plugins
Drivers > Misc > FakeSMC v5.3.820 HWMonitor Application Drivers > Misc > NullCPUPowerManagement
Drivers > Misc > USB 3.0 - Universal by Zenith432
Drivers > Network > Realtek - Lnx2Mac's RealtekRTL81xx v0.0.90 Drivers > System > AppleACPIPlatform Rollback > 10.8.1 Rollback Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v2.2.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > GraphicsEnabler=Yes
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > Use KernelCache
Customize > Boot Options > Verbose Boot
Customize > System Definitions > Mac Pro > Mac Pro 3,1 Customize > Themes > tonymacx86 Black [/FONT]
Code:
[FONT=Helvetica Neue]MSI Z68MA-G45(B3) Version E7676IMS V20.1
PCI Latency Timer [32 PCI Bus Clocks]
ACPI Settings
ACPI Standby State [S3]
Power LED [Blinking]
Integrated Peripherals
Onboard LAN Controller [Enabled]
Lan Option ROM [disabled]
Network stack [disabled]
SATA Mode [AHCI Mode]
SATA Hot Plug [Disabled]
HD Audio Controller [Enabled]
HPET [Enabled]
Integrated Graphics Device Config
Virtu Technology [Disabled]
Initiate Graphic Adapter [PEG]
IGD Multi-Monitor [Disabled]
Intel Rapid Start Technology [Disabled]
USB Configuration
USB Controller [Enabled]
Legacy USB Support [Enabled]
Onboard USB 3.0 Controller [Enabled]
Serial(com) port0 [Disabled]
Parallel Port [Disabled]
Hardware Monitor
CPU Smart Fan Target [Disabled]
Sys Fan Control [Auto]
Intel Smart Connect Technology [Disabled]
Power Management
EuP 2013 [Disabled]
Restore After AC Power Loss [Power Off]
Wake up Config
Wake Up Event by [BIOS]
Resume by ... [Disabled]
Overclocking settings
CPU Base Freq [10000]
Adjust CPU Ratio [Auto]
Adjust CPU Ratio in OS [Disabled]
Internal PLL Overvoltage [Auto]
EIST [Enabled]
Intel Turbo Boost [Enabled]
Enhanced Turbo [Disabled]
DRAM Freq [Auto]
Extreme Memory Profile [Disabled]
DRAM Timing Mode [Auto]
Memory Fast Boot [Enabled]
Spread Spectrum [Disabled]
CPU Core Voltage [Auto]
DRAM Voltage [1.489]
Energy Saving
EuP 2013 [Disabled]
C1E Support [Disabled]
Intel C-State [Enabled]
Package C State Limit [Auto][/FONT]Can anyone help?
Thanks!
