MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

[NorthAmTransAm]

I took last OC 0.8.8 from @NorthAmTransAm but my mistake I used old OC configurator to edit it.

Anytime someone hates on OCC this is the culprit. Good on you for knowing whats up!

 

[nyu1985]

Yes indeed no MMIO stuff, just removed FakeSMC extensions from L/E. Thanks a lot guys !

 

[joistik]

Hi all, I have your usual motherboard and managed to install ventura 13.1. What I ask you is:
- how to make the Ethernet port work?
- how to do for Logitech Bluetooth keyboard and mouse? I have the fenvi board like yours. While loading OpenCore they are not active... and consequently I can't start the maOSc except by attacking the keyboard with wire ....

Thanks in advance, and I hope you can help.

Sorry for english, google translate

 

[tkemp]

Hello everyone, it appears that a lot has occurred recently.

I am here to inquire if anyone has encountered the WiFi variant issue with the Monterey update.

The update has caused my Bluetooth to malfunction and I attempted to resolve it on my own, but ended up crashing my Boot. Fortunately, I had a backup of my previous working configuration.

Would anyone be willing to assist me with this issue? As a precaution, I have uploaded my OC folder (containing kexts, acpi, config, and drivers) for anyone who would like to take a look. Please note that I have removed the SMBIOS information.

 

[sonny362]

Hi all, I have your usual motherboard and managed to install ventura 13.1. What I ask you is:
- how to make the Ethernet port work?
- how to do for Logitech Bluetooth keyboard and mouse? I have the fenvi board like yours. While loading OpenCore they are not

Hi there.
1. My Ethernet (i225-V) defined in Device Properties:
<key>Add</key>
<dict>
<key>PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)</key>
<dict>
<key>AAPL,slot-name</key>
<string>[email protected],28,0/0,0</string>
<key>device-id</key>
<data>8xWGgA==</data>
<key>device_type</key>
<string>Ethernet controller</string>
<key>model</key>
<string>Intel Ethernet controller i225-V</string>
</dict>
</dict>

2. I'm using BlueToolFixup.kext.

 

[danofun]

Hello everyone, it appears that a lot has occurred recently.

I am here to inquire if anyone has encountered the WiFi variant issue with the Monterey update.

The update has caused my Bluetooth to malfunction and I attempted to resolve it on my own, but ended up crashing my Boot. Fortunately, I had a backup of my previous working configuration.

Would anyone be willing to assist me with this issue? As a precaution, I have uploaded my OC folder (containing kexts, acpi, config, and drivers) for anyone who would like to take a look. Please note that I have removed the SMBIOS information.

Attached is OC088. I've disabled Thunderbolt related stuff along with disabling CPUDATAPROVIDER. Add only your serial. Warning, it will try to boot EFI instead of macOS. Make sure you toggle over to macOS.

Check out post #727. Download the EFI and all you need to do is add your SystemSerialNumber. I'd get this running first. If you need to add support for Intel WiFi, once successfully booted, take a look at itlwm.

 

[joistik]

Hi there.
1. My Ethernet (i225-V) defined in Device Properties:
<key>Add</key>
<dict>
<key>PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)</key>
<dict>
<key>AAPL,slot-name</key>
<string>[email protected],28,0/0,0</string>
<key>device-id</key>
<data>8xWGgA==</data>
<key>device_type</key>
<string>Ethernet controller</string>
<key>model</key>
<string>Intel Ethernet controller i225-V</string>
</dict>
</dict>

2. I'm using BlueToolFixup.kext.

Hi there.
1. My Ethernet (i225-V) defined in Device Properties:
<key>Add</key>
<dict>
<key>PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)</key>
<dict>
<key>AAPL,slot-name</key>
<string>[email protected],28,0/0,0</string>
<key>device-id</key>
<data>8xWGgA==</data>
<key>device_type</key>
<string>Ethernet controller</string>
<key>model</key>
<string>Intel Ethernet controller i225-V</string>
</dict>
</dict>

2. I'm using BlueToolFixup.kext.

I did what you wrote for the Ethernet connection but it doesn't work... Any other ideas? For Bluetooth I solved by installing the keyboard and mouse on Windows.

 

[sonny362]

I did what you wrote for the Ethernet connection but it doesn't work... Any other ideas? For Bluetooth I solved by installing the keyboard and mouse on Windows.

Do you see the Ethernet card it Network settings? Try to set connection speed from auto to 1G (or 2,5G, if your router is 2,5G).

 

[tkemp]

Check out post #727. Download the EFI and all you need to do is add your SystemSerialNumber. I'd get this running first. If you need to add support for Intel WiFi, once successfully booted, take a look at itlwm.

I will give it a try on this EFI with OC 0.88.

I already tried to use the itlwm, and that's when I crashed the boot.

I already running this machine since last July, when I first booted the BlueTooth was working just fine, was after some Monterey update it stopped working

 

[joistik]

Do you see the Ethernet card it Network settings? Try to set connection speed from auto to 1G (or 2,5G, if your router is 2,5G).

Thanks for your advice! But with this I solved https://www.amazon.it/gp/aw/d/B08FYB5HHK?ref=ppx_pt2_mob_b_prod_image