MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

[Wuttodo]

@Wuttodo,

That's because the settings are incomplete. Enabling the Intel I225-V 2.5Gbe LAN in Monterey is easy. Simply add e1000=0 to the NVRAM boot-arg and add the following details below to your device properties. LAN driver kext is no longer needed because it is now natively supported by macOS and it will work.

View attachment 555624

As for the Intel BT & WiFi, that's also easy. Grab the three kexts IntelBluetoothFirmware, BluetoolFixup.kext and Airportitlwm.kext (Monterey stable) from the OpenIntelWireless and PatchRAM3 Github repos and enable those.

I already had the similar entry, but instead of 1B it was 1C, nevertheless I added same entry as yours along with boot-arg, but it didn't work. Maybe I need to remove some kexts too? The following method worked however but I wanted it to work automatically.

You can try the simple solution with I-225V Ethernet: fix in the network card settings the transmission speed from auto to 1000Gbs (or to 2500, if yo're using it). It works for me.

Ethernet worked, thank to both of you! But I Bluetooth and Wi-Fi are still not working.

By this point I am feeling like I am hijacking this Golden Build thread, so I have created my own:

Wi-Fi & Bluetooth not working on Alder Lake 12700K build.

I have successfully installed macOS 12.5 (21G72) on my MSI PRO Z690-A WiFi DDR4 + 12700K build. I have basically grabbed OC 0.8 EFI of NorthAmTransAm Golden Build, and updated it to OC 0.8.4 with some changes. And to my surprise it is one of the most stable build, sleep, screen saver works...

www.tonymacx86.com

 

[sonny362]

Bluetooth and Wi-Fi are still not working.

My mobo doesn't have WiFi, sorry.
I'm using the cheepest noname BT whistle (with BT keyb+touchpad), and it works fine with BlueToolFixup.kext.

 

[Basso]

Hi, I'm try ing to get my hackintosch working. I'm stuck on installation errors. Can somebody see what is happening here?

I have:

• MSI MAG Z690 Tomahawk Wifi
• i7-12700F
• Samsung 2TB 980 Pro NVMe
• MSI GT 710

 

[Feartech]

Hi, I'm try ing to get my hackintosch working. I'm stuck on installation errors. Can somebody see what is happening here?

I have:

• MSI MAG Z690 Tomahawk Wifi
• i7-12700F
• Samsung 2TB 980 Pro NVMe
• MSI GT 710

the guide is in post 1

 

[danofun]

@NorthAmTransAm This thread has proved to be invaluable for countless individuals. We thank you. With Ventura releasing on 10/24, do you plan to update the guide and/or EFI?

 

[dgs57]

@NorthAmTransAm This thread has proved to be invaluable for countless individuals. We thank you. With Ventura releasing on 10/24, do you plan to update the guide and/or EFI?

Everything works perfectly on my MSI Z690, having followed the guide of this post and with update to OC 0.86 and Ventura RC 22A379

 

[dgs57]

My mobo doesn't have WiFi, sorry.
I'm using the cheepest noname BT whistle (with BT keyb+touchpad), and it works fine with BlueToolFixup.kext.

On my Z690 system I have installed both the wifi and the BT integrated in the mobo, both the Fenvi T919 card and an Archer T3U plus usb key installed with the Chriss1111 procedure. I decide in the system preferences which one to use. Normally I use the USB T3U plus which receives a stronger signal from the router, which is approx. 30 meters from where I have my work station, and it travels at 170 mbps. With the LAN and Intel I-225 network cable, which is also perfectly functional, I travel at 950 mbps with the ftth fiber.

 

[danofun]

Everything works perfectly on my MSI Z690, having followed the guide of this post and with update to OC 0.86 and Ventura RC 22A379

great to hear!

 

[dgs57]

great to hear!

A special and due thanks goes to you @danofun for your valuable contribution to the mapping of the usb ports and from which I have widely drawn to map mine with saving of time and stress.

 

[danofun]

Very kind of you. My contribution pales in comparison to @NorthAmTransAm but I’m happy to contribute to the cause. Cheers!