MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

[danny2305]

Congrats on the flashing! Not so bad, right?

As for the two power connectors, they are not necessary unless you plan on charging something with the thunderbolt connectors.

I unplugged the USB 2.0 Header as well.

Everything working?

I've not try yet. I just put back the 4 screws, and I install it. I will come back to you shortly for the conclusion. So far everything has gone well. and the flash has been soft.

 

[danny2305]

OK! Everything works. My Apollo Twin is connected. However, it must be on when starting or otherwise it is not recognized...
Is there a solution?

 

[NorthAmTransAm]

OK! Everything works. My Apollo Twin is connected. However, it must be on when starting or otherwise it is not recognized...
Is there a solution?

Can you send me a copy of your IOReg?

 

[Blehzinga]

Does anyone have Internet issues where the 'net slowly gets patchy over time and has disconnects ?

 

[NorthAmTransAm]

Does anyone have internet issues where the net slowly gets patchy over time and has disconnects ?

All is well over here. Try disabling or enabling Arptbrcmfixup.

 

[danny2305]

Can you send me a copy of your IOReg?

 

[NorthAmTransAm]

Awesome. Attached is SSDT-TB3-HackinDROM and SSDT-DTPG.

• SSDT-DTPG adds a method that our SSDT-TB3-HackinDROM needs.
• SSDT-TB3-HackinDROM names the devices under PC00.RP05 (where are Thunderbolt card is) and enables Hot Plug.

Please add the patch Null GPE.TINI to increase boot time with TB enabled. You can find it in my 080 EFI. Pictured below.

MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

Okay im fine, so its noch crashed anymore :D ! But im woundering, he shows me a i5 12600k but i have a i7 12700k?

www.tonymacx86.com

Also, instead of using terminal for IOReg you can use IORegistry Explorer! Though props to your for the terminal output. I loved that.

GitHub - khronokernel/IORegistryClone: Clone IOReg from Apple's site

Clone IOReg from Apple's site. Contribute to khronokernel/IORegistryClone development by creating an account on GitHub.

github.com

 

[danny2305]

Awesome. Attached is SSDT-TB3-HackinDROM and SSDT-DTPG.

• SSDT-DTPG adds a method that our SSDT-TB3-HackinDROM needs.
• SSDT-TB3-HackinDROM names the devices under PC00.RP05 (where are Thunderbolt card is) and enables Hot Plug.

Please add the patch Null GPE.TINI to increase boot time with TB enabled. You can find it in my 080 EFI. Pictured below.

MSI PRO Z690 A DDR4 + i7-12700K + AMD RX 580

Okay im fine, so its noch crashed anymore :D ! But im woundering, he shows me a i5 12600k but i have a i7 12700k?

www.tonymacx86.com

Also, instead of using terminal for IOReg you can use IORegistry Explorer! Though props to your for the terminal output. I loved that.

GitHub - khronokernel/IORegistryClone: Clone IOReg from Apple's site

Clone IOReg from Apple's site. Contribute to khronokernel/IORegistryClone development by creating an account on GitHub.

github.com

View attachment 546743View attachment 546744

I don't understand what you did but everything works perfectly! thank you very much I am amazed... I already had the files and the patch that I had taken from your file but with those that you sent me it was all fixed! thanks again! you are a genius!

 

[NorthAmTransAm]

I don't understand what you did but everything works perfectly! thank you very much I am amazed... I already had the files and the patch that I had taken from your file but with those that you sent me it was all fixed! thanks again! you are a genius!

The key was to replace PCI0 with PC00 and to make sure the Root Port was set to RP05.

As for genius, I'm just a user and trouble shooter. The journey to Thunderbolt was a long one I contributed very little. Same for Alder Lake.

Happy to help. Never gets old does it @CaseySJ?

 

[danny2305]

I don't understand what you did but everything works perfectly! thank you very much I am amazed... I already had the files and the patch that I had taken from your file but with those that you sent me it was all fixed! thanks again! you are a genius

The key was to replace PCI0 with PC00 and to make sure the Root Port was set to RP05.

As for genius, I'm just a user and trouble shooter. The journey to Thunderbolt was a long one I contributed very little. Same for Alder Lake.

Happy to help. Never gets old does it @CaseySJ?

View attachment 546748

you even fixed my monitor problem, I have a samsung m8 and it didn't work on the thunderbolt despite the egpu displayport cable to the titan's mini-displayport input... now it can be plugged in and the webcam also works