MSI H410M PRO - End RandomSeed Issue

[meyniyak]

Hello, I want to install Mojave 10.14.6 (I prefer Mojave but im using some special programs), but I get an End RandomSeed error during installation. I tried many methods but I am not getting any good results.

My system;

Desktop
CPU: Intel i7 10700k
Motherboard: MSI H410M Pro
Ram: Crucial Ballistix 8GBx2 3000mhz
GPU: None
SSD: Samsung EVO 970 Plus 500GB

BIOS config;
Integrated Grapihic Adapter: IGD
XHCI Hand-off: Enabled
Legacy USB Support: Enabled
Above 4G memory: Disabled (tried on Enabled)
BIOS CSM/UEFI Mode: UEFI
Fast Boot: Disabled (tried on Enabled)
Secure Boot: Disabled
Hyper-Threading: Enabled
Extreme Memory Profile: Enabled
Intel VT-D Tech: Disabled

All of my BIOS settings screenshots and Opencore EFI and configs that i tried, attached on this post.

And i tried this one, https://github.com/Old-Black-Dog/Hackintosh-ASRock-Z490M-ITX-ac

I need a solution, please help me. Thank you!

 

[etorix]

Check the CFG Lock (MSR 0xE2 register). If locked, use Kernel>Quirks>AppleXcpmCfgLock in accordance with the Dortania guide.
What is the MAT status in OpenCore logs?

I would re-enable Above 4G Decoding and disable any overclocking setting (XPM) until after successful install.

 

[emii]

Did you obtain good results with this MB?