MSI B360 GP + I7 9700K + GTX1060 Help needed.

[Arock]

Hello, long story kinda short, I've had my Hackintosh High Sierra 10.13.6 build on an Asus motherboard (can't remember model), I5 3rd gen and same gtx1060 on an ssd, all working perfectly.
I've upgraded to MSI B360 GAMING PLUS, I7 9700K and I can't boot the ssd anymore.
At first, I wasn't even able to boot my windows HDD, but I've updated bios to latest version and now it boots fine.
Made a separate clover usb bootloader
I've got the bios settings right, searched everything I could on google, updated my clover folder, config file to no luck
I always get stuck at
apfs_module_start : 1279: load: com.apple.filesystems.apfs, v748.51.0, 748.77.8, 2018/06/21
For the last two days I'm stuck here and I can't get past this.
Same error if I try to boot both legacy/UEFI from both ssd with the old EFI Folder and the bootable stick with many, many versions of clover installed.Tried MBR, GUID , FAT32, HFS+J.Even got a folder from a guy with very similar specs

[SUCCESS] MSI B360 Gaming Plus - i7 8700 - GTX 1070 - High Sierra 10.13.4

[SUCCESS] MSI B360 Gaming Plus - i7 8700 - GTX 1070 - High Sierra 10.13.4

MESwan's First Hackintosh: MSI B360 Gaming Plus - i7 8700 - GTX 1070 Sapphire Nitro+ RX580 - High Sierra 10.13.4 Mojave 10.14.2 BETA 4 https://www.tonymacx86.com/media/build-powered-on.190493/full?d=1526057519 Update 12/03...

www.tonymacx86.com

Still no luck
even tried vanilla install, not even the installer works, not working with UniBeast neither.

Please help, as I am really out of ideas and I'm starting to think it's the motherboard's fault...Maybe bad bios ?
Thanks.

 

[Arock]

 

[P1LGRIM]

I always get stuck at
apfs_module_start : 1279:

Download it and add it to /EFI/CLOVER/ACPI/patched.
SSDT-EC.aml.

 

[Arock]

Download it and add it to /EFI/CLOVER/ACPI/patched.
SSDT-EC.aml.

Not so many ACPI errors, but still..

 

[Arock]

GOT IT TO WORK!
Finnaly, after so much trial and error, it indeed was motherboard bios related, and this was the fix

FIX for boot hangs after BIOS update (ACPI PATCH)

This is an ACPI Patch for the people who update to the last bios and can't boot. My board is the MSI B360A-Pro and has the latest bios 7B22v27. First add the patch (the blue line from the picture) to clover config, then apply the Bios update. To easily add the patch using terminal, read post #48

www.tonymacx86.com