More Success w/Multibeast 5.0, Intel DZ77BH-55K. Wake from sleep still not working any suggestions

[fsuttile]

Just ran MultiBeast 5.0 on my Ivy Bridge build.

Working
Audio(rear jack works as "Internal Speakers Built-in") with ALC898 selected in Multibeast - Drivers - Audio - Realtek ALC8xx - Without DSDT
EVGA GTX570HD Graphics card. Use PCIRootUID=0 when initially installing from UniBeast, works natively after Multibeast
Ethernet port with "hnak's AppleIntelE1000e Ethernet" selected in Multibeast - Drivers - Network
All USB 2.0 ports (4 on rear panel, 2 on front panel)
Rear USB 3.0 ports (4 on rear panel)
Restart
Shut Down will fully shut down system without powering back on (Like Restart)

Not working
Front USB 3.0 ports
1600 MHz RAM showing 1333 MHz. This was corrected with Multibeast 4.6.1 by Changing Memory Optimization in BIOS from Automatic to Profile 1: XMP-1600
Wake from sleep still not working.

All in all, the system is way more stable after MultiBeast 5.0...Thanks Tonymac, MacMan & the whole community.
Any suggestions on how to get the Wake from sleep working would be hugely appreciated.





Geek Bench 2 score after running Multibeast 5.0 - 11968

 

[Stork]

Check the Energy Saver pane in System Preferences to make sure only the 1st three boxes are checked.

 

[fsuttile]

Thanks for the tip. I already tried that and no go.

On the plus side, the Screen Saver is working well which is something else which was not working w/ Multibeast 4.6.1. Also I have now verified that USB 3.0 is working at the high speed transfer rate. Less than 2 hours to copy 500 GB of items from one external USB 3.0 to another, 30 minutes to copy 250 GB from internal Sata II drive to USB 3.0

 

[Asus-Freak]

Is the problem that it won't wake from sleep, or it won't auto sleep?

 

[fsuttile]

Will not wake from sleep.