Contribute
Register

Monterey Public Beta on Asus X99 Deluxe II

Status
Not open for further replies.
Yes! it works!
Thank you very much!
i will test both systems:)
Very good!

EFI folder for OC 0.7.4 (link) has been updated with these changes. HackinDROM has also been updated.
 
Last edited:
Can confirm that Sleep is no longer working in Catalina, though Monterey is getting better and better and I may be leaving Catalina in the past.

Has anyone had trouble installing the latest beta 9? With the changes in OC 0.7.4 to Secure Boot, I am able to get OTA updates again, but when I boot into "Macintosh HD" to install the update, I run through the boot sequence and then auto-restart. Need to diagnose more, even in Verbose mode the text scrolls so fast I can't see what's panicking.
 
Can confirm that Sleep is no longer working in Catalina, though Monterey is getting better and better and I may be leaving Catalina in the past.

Has anyone had trouble installing the latest beta 9? With the changes in OC 0.7.4 to Secure Boot, I am able to get OTA updates again, but when I boot into "Macintosh HD" to install the update, I run through the boot sequence and then auto-restart. Need to diagnose more, even in Verbose mode the text scrolls so fast I can't see what's panicking.
I had no trouble installing Monterey Public Beta 9, but I did so as an in-place upgrade from Public Beta 7.

I have SecureBootModel set to Default (iMacPro1,1) and AdviseFeatures clicked on.
 
** OpenCore 0.7.5 EFI for Asus X99 Deluxe II **
Supports Catalina, Big Sur, and Monterey
Please do not quote this post in its entirely. Use a link instead.

Monterey - What Does Not Work:
  • Laird BT851 Bluetooth 5.0 USB dongle not working at this time.
  • If Monterey is installed on Samsung NVMe SSDs, boot time can increase by 60-100 seconds due to "trim" incompatibilty.
    • This can be addressed by cloning the Samsung NVMe SSD to another disk, erasing the Samsung NVMe SSD with Disk Utility, and cloning macOS back. Please be careful with this process if you decide to do it.

This update includes:

1. OpenCore 0.7.5
2. AppleALC 1.6.6
3. Lilu 1.5.7
4. WhateverGreen 1.5.5
5. BlueToolFixup 2.6.1
6. BrcmFirmwareData 2.6.1
7. BrcmPatchRAM3 2.6.1

Reminder:
  • Copy serial numbers into PlatformInfo —> DataHub section of config.plist. These include:
    • System Product Name
    • System Serial Number
    • System UUID
    • MLB (Board Serial Number)
    • ROM
  • Radeon VII and Vega 56/64 users must disable or remove boot argument agdpmod=pikera.
  • If USB mouse/keyboard do not work in OpenCore Boot Picker, try unchecking OpenUsbKbDxe.efi in UEFI --> Drivers section of config.plist.
  • When performing a clean installation of Monterey, it may be necessary to set SecureBootModel to Disabled in Misc --> Security section of config.plist.
If using OpenCore Configurator, please ensure it is set to 0.7.5 Development or Release Version.

If downloading the attached file, please enter credentials in config.plist --> PlatformInfo --> DataHub before booting.


Updates:
  • 02 Nov 2021: Initial version.
 

Attachments

  • EFI-075-ASUS-X99-DELUXE-II.zip
    7.2 MB · Views: 147
Last edited:
** OpenCore 0.7.6 EFI for Asus X99 Deluxe II **
Supports Catalina, Big Sur, and Monterey
Please do not quote this post in its entirely. Use a link instead.

Also available from HackinDROM

Please use OpenCore Configurator 2.54.0.0 or 2.54.0.1 and ensure that it's set to
0.7.6 Development Configuration or 0.7.6 Release Version

When using OpenCore Configurator, ensure that only one EFI partition is mounted

Monterey - What Does Not Work:
  • Laird BT851 Bluetooth 5.0 USB dongle not working at this time.
  • If Monterey is installed on Samsung NVMe SSDs, boot time can increase by 60-100 seconds due to "trim" incompatibilty.
    • This can be addressed by cloning the Samsung NVMe SSD to another disk, erasing the Samsung NVMe SSD with Disk Utility, and cloning macOS back. Please be careful with this process if you decide to do it.
  • Crucial P2 NVMe SSDs (only P2 series) also suffer from trim issues in Monterey.

This update includes:

1. OpenCore 0.7.6
2. AppleALC 1.6.7
3. Lilu 1.5.8
4. VirtualSMC 1.2.8

Reminder:
  • Copy serial numbers into PlatformInfo —> DataHub section of config.plist. These include:
    • System Product Name
    • System Serial Number
    • System UUID
    • MLB (Board Serial Number)
    • ROM
  • Radeon VII and Vega 56/64 users must disable or remove boot argument agdpmod=pikera.
  • If USB mouse/keyboard do not work in OpenCore Boot Picker, try unchecking OpenUsbKbDxe.efi in UEFI --> Drivers section of config.plist.
  • When performing a clean installation of Monterey, it may be necessary to set SecureBootModel to Disabled in Misc --> Security section of config.plist.
If using OpenCore Configurator, please ensure it is set to 0.7.5 Development or Release Version.

If downloading the attached file, please enter credentials in config.plist --> PlatformInfo --> DataHub before booting.

Catalina Users:

Please set SecureBootModel to Disabled.
Screen Shot 2021-12-06 at 11.54.57 AM.png




Updates:
  • 06 Dec 2021: Initial version.
 

Attachments

  • EFI-076-ASUS-X99-DELUXE-II.zip
    8.5 MB · Views: 146
Last edited:
Thanks as always. I was wondering why my Samsung 960 EVO took so long to boot compared to my little SATA disk. Good to know there is a workaround.
 
Does anyone have working thunderbolt 3 hotplug on the prime deluxe ii? Mine only works with it plugged in at boot. also no usb c peripherals work through it. thanks!
 
Long time no see guys :)
I'm trying to update my old machines, switching from old @kgp clover to oc, X99 Deluxe II with 6900K
@CaseySJ my boot stuck at virtual bool IONVMeController::start......
no idea what does it mean, strongly appreciate any help, thank you
266932617_1607745352957387_7880439852669233129_n.jpg
 
@Obecny, I'm having the same issue. Did you figured it out how to fix it?
 
Status
Not open for further replies.
Back
Top