- Joined
- Oct 15, 2013
- Messages
- 19
- Motherboard
- Asus H170M-Plus
- CPU
- i5-6600
- Graphics
- igpu
Do you mean try one of this 2 codes? Where should i put the ig code?0x19120001, 0x19120003?
Or try ig 0x0a260006 SKL CRB.
Thanks
Do you mean try one of this 2 codes? Where should i put the ig code?0x19120001, 0x19120003?
Or try ig 0x0a260006 SKL CRB.
Do you mean try one of this 2 codes? Where should i put the ig code?
Thanks
- To test the effect of choosing that value on your graphics, you can type in that value during boor/reboot in Clover Boot Manager (CBM)>Options>Graphics Injector-> *-platform-id 0x0a260006.
- If if fixes the issue, you can edit the System Disk's /EFI/CLOVER/config.plist in the Graphics_ SECTION under ig-platform-id and type in 0x0a260006 and save to make it permanent.
- Then on, you should see that value at CBM>Options>GraphicsInjector.
- To edit config.plist, you need to mount the 'hidden' EFI partition of your Hard disk on the Desktop using a tool like EFI Mounter V3 and then navigate and find CLOVER/config.plist and then edit using a Tool like plist editor if you are familiar with that or a Gui tool like Clover Configurator Global Clover Configurator (Global Edition)
The edited screen shot from CCG will be like the one I have uploaded.
@cmn699
Change in this menu option right? Isn't need change fakeid?
Which smbios should i use or isn't important? i'm using 14,2
- To test the effect of choosing that value on your graphics, you can type in that value during boor/reboot in Clover Boot Manager (CBM)>Options>Graphics Injector-> *-platform-id 0x0a260006.
- If if fixes the issue, you can edit the System Disk's /EFI/CLOVER/config.plist in the Graphics_ SECTION under ig-platform-id and type in 0x0a260006 and save to make it permanent.
- Then on, you should see that value at CBM>Options>GraphicsInjector.
- To edit config.plist, you need to mount the 'hidden' EFI partition of your Hard disk on the Desktop using a tool like EFI Mounter V3 and then navigate and find CLOVER/config.plist and then edit using a Tool like plist editor if you are familiar with that or a Gui tool like Clover Configurator Global Clover Configurator (Global Edition)
The edited screen shot from CCG will be like the one I have uploaded.
With 0x0a260006 i still have 6Mb ram :/
Sorry i updated the info.Please fix your Personal Details per Forum rules .
I mistook the hardware SPECS of OP as yours and answered it that way about the SMBIOS question referring to the First Thread.
Hijacking somebody else's post is not a good Forum etiquette and would cause problems for helpers too .
As a longstanding member of this Forum, you and I cannot claim we did not know the rules .
We have a special responsibility.
Hello i put the settings like (pic) have glitchesFor this one use no device ID 0x19128086, and no inject intel.
Only set ig 0x0a260006.